2016 BMW M3 Performance and Racing Products

Unique Computer Design Carbon Fiber Housings: The simple yet elegant design of the one-piece sealed housings makes installation a snap and features our (Patent Pending) filter-to-housing interface. The housing is made out of lightweight high gloss, clear-coated twill weave carbon fiber. Dyno-Tuned Carbon Fiber Intake Tubes: Lightweight, high gloss, clear-coated twill weave carbon fiber tubes to achieve maximum power gains while maintaining a perfect fit. Large 3-Layer “Oil-Free” Performance Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone inverted top filter has a large 3-1/2″ round flange and is 6-1/2″ tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic “oil-free” media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Black Series Momentum Air Intake System: Also included in the kit is a Black Series serialized plate to assure the authenticity of the intake. Premium Hardware: Premium stainless steel clamps and a reinforced silicone coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

Product Features:

• Outflows Factory Intake By 46%
• 100% Twill Weave Carbon Fiber Housing And Tube
• Unique Housing To Filter Interface-Patent Pending
• 5-Layer Progressive Cotton Gauze Media

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

The smooth one-piece sealed housings with auxiliary air inlets are used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. Large, clear sight windows are used for a hassle-free filter inspection and an aggressive style. This System uses CAD designed, dyno-tuned, roto-molded intake tubes to achieve maximum power gains while maintaining a perfect fit. This intake system utilizes oil-free, large 5″ tall conical 360 degree radial flow performance air filters with 3-Layer progressively finer porosity synthetic media for maximum convenience. Premium clamps are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Pro 5R Filter Media
• 5-Layer Progressive Cotton Gauze Media
• Washable And Reusable Air Filter
• Rotomolded Tube

Unique One-Piece Sealed Housing: A custom CAD designed roto-molded housing made high quality plastic eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. Carbon Fiber Finish Trim Cover: This carbon fiber finish trim cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Large 3-Layer “Oil-Free” Performance Air Filter: This sealed intake system utilizes an oil-free, large 6″ tall conical inverted top 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience. Premium Hardware: Premium hardware and clamp are used to securely mount the high flow air filter and the intake tube. This sealed intake system is designed with fewer parts for a quick and simple installation.

Product Features:

• 798 CFM Rating at 7 in. H2O
• Outflows Factory Intake By Up To 50 Percent
• High Quality Sealed Housing w/Air Inlet
• CAD Designed Roto-Molded Intake Tube

This air intake system produces up to +20 hp, 25 lbs. x ft. torque and out-flows the factory intake by 80%. Included in this system is a washable/reusable oiled conical air filter that uses five layers of progressive weave media for maximum air flow. The filter is constructed with 100% polyurethane for a long life and multiple cleaning cycles. This intake system also features a roto-molded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.

Product Features:

• Out Produces Factory Intake By 80%
• Produces An Astonishing 20 HP And 25 ft./lbs. Torque
• Includes A Durable 18 Gauge; Powder coat Heat Shield
• CAD-Designed Roto-Molded Intake Tube

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube For Maximum Air Flow
• 42% cfm Flow Gain
• Improved Throttle Response

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro DRY S Air Filter For Maximum Convenience
• Rotomolded Plastic Tube For Maximum Air Flow
• 41% cfm Flow Gain
• Improved Throttle Response

Unique One-Piece Sealed Housing: A custom CAD designed roto-molded housing made high quality plastic eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. Carbon Fiber Finish Trim Cover: This carbon fiber finish trim cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Large 5-Layer Performance Air Filter: This sealed intake system utilizes a pre-oiled, large X” tall conical inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Premium Hardware: Premium hardware and clamp are used to securely mount the high flow air filter and the intake tube. This sealed intake system is designed with fewer parts for a quick and simple installation.

Product Features:

• 1056 CFM Rating at 7 in. H2O
• Outflows Factory Intake By Up To 98 Percent
• High Quality 1-Pc. Sealed Housing
• CAD Designed Roto-Molded Intake Tube

Large Five Layer Performance Air Filters:These 6″ tall 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. This media provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases, making it perfect for street and/or track use. Their inverted top makes for more filter surface area, resulting in longer service intervals.

Product Features:

• Outflows Factory Intake by 32%
• Measured Flow: 765 CFM @ 7″ H2O
• Open-Element Design Allows For Viewing of the Air Filters, Yet Seals When Hood is Closed to Keep Out Hot Air
• Washable and Reusable Pro DRY S Air Filters for Maximum Convenience

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube For Maximum Air Flow
• Improved Throttle Response
• Repl. Factory Intake For Improved HP/Torque/Styling

Motorsport-Inspired Look:Upgrade your existing aFe POWER intake tube with a fresh carbon fiber trim piece. A great addition to the existing carbon fiber bits under the hood, it’s stealthy, yet classy – fit for a BMW.

Product Features:

• Secures the Coolant Hose on the Intake Tube
• Replaces the Existing Aluminum or Carbon Fiber Trim with an Upgraded Carbon Fiber Look
• Fits Part Numbers 5X-76305 & 54-13032R/D