Name: CV Boot Kit
Brand: Rein
SKU: BKN0116
Price: 34.99 USD

from

$34.99

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.

Product Features:

Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
Comes with the OE grease
Boot manufactured with highest quality materials to prevent cracking, wear and leaking
Matches original equipment design specifications

from

$70.28

With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.

Product Features:

For every specific application a boot kit to the OES standard
Reliable protection against damp and dirt
Optimum sealing and abrasion resistance
Manufactured according to DIN EN ISO 9001:2000

from

$83.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 06-17;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 2006-2017
Weight approx: 1 Lbs
BEARING ID / BORE: 1.1811 INCH / 30 MM
CENTERLINE: 0.45 INCH / 11 MM
MOUNT WIDTH: 6.30 INCH / 160 MM
STYLE: ROUND FRAME
WITH WINGS

from

$158.55

The Vaico Driveshaft Support with Bearing is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Made in Germany OE Quality
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications Q+ The Seal of Excellence
ALWAYS OEM QUALITY
ALWAYS MADE IN GERMANY

from

$20.34

Differential Side Cover Seal, 90 x 44 x 10

from

$14.99

VAL EP ATF 6/1 QT

from

$31.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$23.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.99

Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.

Product Features:

Designed to tight tolerances to ensure proper sealing.
Rein Oil Drain Plugs are coated for high corrosion resistance.
Designed and constructed to strict engineering quality standards.
Includes copper sealing gasket.

from

$717.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$1044.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$3560.52

Transfer Case Assemb

from

$888.93

GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.

Product Features:

OEM Quality and a Direct fit Replacement
Provides exceptional reliability.
Improved space utilization through power unit and gearbox repackaging potential.
Lighter weight provides improved fuel efficiency.
Better driving characteristics and comfort
Optimum power delivery for peak vehicles

from

$488.11

Axle Assembly

from

$64.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National