2015 Western Star 4800 Belts and Hoses

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Product Features:

• Oil and heat-resistant Nitrile tube
• Oil, abrasion and heat-resistant Neoprene cover
• Two-ply fabric reinforced
• Exceeds SAE J20 (Class B Tube and Class C Cover)
• Temperature Range: -40 Deg. F to +212 Deg. F (-40 Deg. C to +100 Deg. C)
• Caution: Do not use for gasoline or diesel transfer applications

Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:

• Capable of withstanding extreme temperatures and high-pressure environments
• Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
• Not suitable for fuel or oil transfer
• PLEASE NOTE: Priced and sold by inch. See store for details.

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Engineered to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Engineered to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Engineered to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

This Litens Idler Pulley is manufactured by one of the world’s largest original equipment pulley suppliers to ensure proper fit and performance. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Designed and engineered by the Original Equipment supplier of this application
• Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface.
• Lower Idler Pulley Position
• Pulley Specs: 70mm (OD) x 10mm (ID -Inner Bore) x 18mm (ID – Inner Bore) x 34mm (Width).
• Smooth/Backside – Steel Pulley.

This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This tensioner has been redesigned from the original OE design to increase life and durability. This tensioner has 3 pulleys; 1 grooved and 2 flat, it has a larger pivot bushing, longer tensioner arm for reduced arm motion, an inline load balance for enhanced tensioner alignment, 2 6303 ball bearings proven to last longer than conventional bearings, higher damping consequently reducing arm motion and wear as well as an optimized install feature for ease on tensioner replacement. This tensioner fits 2008-2015 F’liner 114SD, Bus Class M2, Cascadia, Century Class, Columbia, Coronado / Western Star 4900 Series with DD13/DD15. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Optimized components engineered for maximum strength and durability
• Patented design provides superior belt alignment and tension for improved drive efficiency and life
• Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
• Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
• Double row bearings carry more load and last up to 3X longer than two individual bearings
• Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
• Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components

For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:

• Designed to prevent fluctuations to the tensioner body for longer service life.
• Reduces the risk of noise and helps avoid housing separation
• Includes pulleys with lubricated bearings for longer lasting performance
• Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability

Product Features:

• Optimized components engineered for maximum strength and durability
• Patented design provides superior belt alignment and tension for improved drive efficiency and life
• Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
• Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
• Double row bearings carry more load and last up to 3X longer than two individual bearings
• Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
• Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components

This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Designed and engineered by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys
• Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
• Installation instructions included.
• Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance.
• Professional Mechanics will change this tensioner in approx. 1/2 hour
• Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d

For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the pat

Product Features:

• Designed to prevent fluctuations to the tensioner body for longer service life
• Reduces the risk of noise and helps avoid housing separation
• Includes pulleys with lubricated bearings for longer lasting performance
• Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability

This Heavy Duty Truck and Bus tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Specifically designed for a wide variety of trucks and buses with a Cummins ISM engine. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Heat and ozone resistant cover.
• Engineered to resist electrochemical degradation – the leading cause of hose failure.
• Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
• Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
• Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
• Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.