Name: Fuel Tank Cleaning Kit
Brand: Delphi
SKU: FC01
Price: 12.49 USD

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$548.02

Hitachi Automotive Systems manufactures and markets engine management, electric powertrain, drive control, and car information systems for major automotive original equipment manufacturers worldwide. As a part of the fuel delivery system, the fuel pump is the bloodline of a vehicle, sending a constant supply of pressurized fuel from the tank to the fuel injector. The pump creates positive pressure in the fuel lines, pushing fuel to the engine. Rely on Hitachi OE fuel pumps to disperse fuel accurately and meet optimal horsepower requirements for the modern vehicle!

Product Features:

Constant and pressurized supply of fuel
Accurate fuel dispensing
Fuel flow meets the optimal horsepower requirements of modern vehicles
OE quality and reliability

from

$2.43

Fuel Injector Seal

from

$43.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$111.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$59.54

The Original Equipment Fuel Pressure Sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

Built-in circuit protection to ensure your electronics and computer systems stay unharmed
High reliability of pressure sensing proved in gasoline and diesel direct injection systems
Sturdy design, vibration resistant and thermal stability

from

$25.29

The high-performance TEV canister purge valve constructed of plastic complies with all the requirements of manifold injection and gasoline direct injection.

Product Features:

Favorable price-to-performance ratio
Optimized triggering when minimal amounts are detected, giving quiet idling
Steeper rise of characteristic line
High maximum flow Installation on engine generates less noise
Integrated protective sieve prevents accumulation of dirt
Compact and light
Quick and simple fitting

from

$36.69

Fuel Pump Tappet

from

$311.78

Thermal efficient brazed aluminum core with molded plastic tanks; OEM level performance and durability; 100% brand new in box.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$32.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$146.99

This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:

Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation
Plug and play installation – this fuel pump driver requires no modifications or special tools to install
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Quality tested – vehicle simulation tested to ensure performance

from

$1718.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, remanufactured with the latest upgrades to components and specifications.

from

$60.47

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

Built-in circuit protection to ensure your electronics and computer systems stay unharmed
High reliability of pressure sensing proved in gasoline and diesel direct injection systems
Sturdy design, vibration resistant and thermal stability

from

$9.20

Air Mass Sensor O-Ri

from

$2.76

Cold Start Valve Gasket

from

$4.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$192.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$19.95

Fuel Injector O-Ring

from

$52.99

Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.

Product Features:

Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$147.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$286.99

Designed and manufactured to strict OE standards and subjected to rigorous safety and performance tests. Helps restore proper pressure and functionality to the vehicle’s fuel and emissions system.

from

$122.33

Exhaust Gas Diff. Pr

from

$75.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$2.05

Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.

from

$124.19

Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.

Product Features:

OEM Quality Direct fit Application
Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
Extensive measuring range
Highly sensitive, particularly for small changes in flow rate
Wear-free since there are no moving parts
Insensitive to dirt and contamination
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$451.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$2.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$12.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features: