2015 Subaru XV Crosstrek Steering and Chassis Parts
More 2015 Subaru XV Crosstrek Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2015 Subaru XV Crosstrek, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2015 Subaru XV Crosstrek Steering and Chassis Parts
Driveworks – Camber Bolt Kit (Part No.DW-K90474)
from
$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.
Product Features:
See More
Product Features:
- Designed to meet OE Form, Fit, and Function.
- Performance tested to ensure durability and reduce tire wear.
- Precision engineered for improved ride and steering response.
- Hardware included for ease of installation (where applicable)
Whiteline – Camber Adjusting Bolt (Part No.KCA414)
from
$48.99
Suffering uneven tyre wear? Sounds like poor alignment. Whiteline camber bolts provide the largest adjustment range (of up to +/- 1.5deg) to get that alignment back in check. Unlike other ‘friction’ lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Rare Parts – Ball Joint (Part No.RP10598)
from
$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Dorman – Control Arm And Ball Joint Assembly – Suspension (Part No.537-163)
from
$123.99
This alignment toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Right Steering Knuckle (Part No.698-136)
from
$176.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Whiteline – Sway Bar 24Mm Xx Heavy Duty Blade Adjustable Motorsport (Part No.BSR49XXZ)
from
$354.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Whiteline – Strut Mount (Part No.KCA409)
from
$236.99
Whiteline offset strut mounts allow for adjustments of either caster or camber depending on driver requirements. Manufactured from low compliance rubber and twin shielded bearing design, this strut top allows for gains in caster or camber depending on vehicle.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Subframe Mount Bushing (Part No.KDT907)
from
$320.99
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
MOOG – Tie Rod End (Part No.ES3712)
from
$65.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Tie Rod End (Part No.DW-ES3712)
from
$28.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
MOOG – Stabilizer Bar Bushing (Part No.K201949)
from
$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
- QUIET DRIVE — Replacement can reduce rear end noise
MOOG – Ball Joint (Part No.K9513)
from
$54.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Designed to meet or exceed original equipment performance
Whiteline – Brace Sway Bar Mount Support (Part No.KBR15)
from
$94.99
Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OEM mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA313)
from
$292.99
A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.
Product Features:
See More
Product Features:
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
Whiteline – Sway Bar Link (Part No.KLC200)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Whiteline – Sway Bar Link (Part No.KLC231)
from
$165.99
The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Featuring premium anodized alloy materials, providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
MOOG – Stabilizer Bar Bushing Kit (Part No.K201913)
from
$23.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Stabilizer Bar Link (Part No.K750404)
from
$46.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Stabilizer Bar Link (Part No.K750084)
from
$50.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Rare Parts – Sway Bar Link (Part No.RP19909)
from
$65.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Dorman – Sway Bar Kit (Part No.927-700)
from
$195.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
MOOG – Control Arm and Ball Joint Assembly (Part No.RK100124)
from
$128.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.528-254)
from
$142.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Cntrl Arm w Ball Jt (Part No.RK623560)
from
$144.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.528-253)
from
$142.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Popular 2015 Subaru XV Crosstrek Steering and Chassis Parts Categories
2015 Subaru XV Crosstrek Steering and Chassis Parts
You count on your 2015 Subaru XV Crosstrek to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 42 Steering and Chassis Parts ranging in price from $14.49 to $354.99, you’re sure to find everything you need for your 2015 Subaru XV Crosstrek.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 8 different brands like Moog, Driveworks, and Carquest Premium. 2015 Subaru XV Crosstrek Steering and Chassis Parts start as low as $14.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 622 extensive product reviews on 2015 Subaru XV Crosstrek Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Transmission Oil Cooler Replacement Hose with 3.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2015 Subaru XV Crosstrek below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2015 Subaru XV Crosstrek
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2015 Subaru XV Crosstrek running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, Carquest Premium, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Ball Joints and Camber Kits. All are waiting to get your 2015 Subaru XV Crosstrek back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated MOOG Steering and Chassis Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Steering and Chassis Parts for your 2015 Subaru XV Crosstrek, and some of our most reviewed MOOG parts include:
FAQs for 2015 Subaru XV Crosstrek Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2015 Subaru XV Crosstrek?
Out of 42 Steering and Chassis Parts for the 2015 Subaru XV Crosstrek, the most popular in our inventory are:
What are the top-rated 2015 Subaru XV Crosstrek Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2015 Subaru XV Crosstrek based on customer reviews/ratings are:
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
