2015 Subaru Legacy Steering and Chassis Parts

Essential 2015 Subaru Legacy Steering and Chassis Parts

Carquest Premium – Pressure Hose Assembly (Part No.40429)

Pressure Hose Assembly

from

$52.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
See More

Dorman – Suspension Control Arm (Part No.524-597)

Suspension Control Arm

from

$227.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Whiteline – Sway Bar 24Mm Heavy Duty Blade Adjustable (Part No.BSF41Z)

Sway Bar 24Mm Heavy Duty Blade Adjustable

from

$307.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Dorman – Control Arm And Ball Joint Assembly – Suspension (Part No.537-163)

Control Arm And Ball Joint Assembly - Suspension

from

$123.99
This alignment toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

MOOG – Camber Adjusting Kit (Part No.K90474)

Camber Adjusting Kit

from

$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Whiteline – Subframe Mount Bushing (Part No.KDT937)

Subframe Mount Bushing

from

$148.99
Subaru’s rear subframe is mounted on rubber voided bushings which allows for a significant amount of compliance/movement in the frame during high cornering loads. Whiteline’s low compliance polymer bushings eliminate this condition by positively locking in the frame position and removing the ‘lateral walking’ found when using high grip tires. The polymer bushing design has soft ‘stand-off’ buffers on the top and bottom surfaces of the bushing to allow slight vertical bushing movement of the subframe to eliminate that ‘rock-solid’ NVH feel and cushion against minor bumps and allow solid positive location when high torque and power is applied.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W0406-20G)

Sway Bar Mount Bushing

from

$25.99
Designed to fit a 20mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

MOOG – Ball Joint (Part No.K9513)

Ball Joint

from

$54.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Designed to meet or exceed original equipment performance
See More

Carquest Premium – Tie Rod End (Part No.310-550099)

Tie Rod End

from

$31.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Whiteline – Sway Bar Link (Part No.KLC31)

Sway Bar Link

from

$256.99
The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

MOOG – Stabilizer Bar Link (Part No.K80426)

Stabilizer Bar Link

from

$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA375)

Control Arm Lower Inner Rear Bushing

from

$125.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Strut Mount (Part No.KCA409)

Strut Mount

from

$236.99
Whiteline offset strut mounts allow for adjustments of either caster or camber depending on driver requirements. Manufactured from low compliance rubber and twin shielded bearing design, this strut top allows for gains in caster or camber depending on vehicle.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA313)

Roll Centre/Bump Steer Correction Kit

from

$292.99
A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

Product Features:
  • Articulation voids deliver necessary suspension articulation and/or compression under loads.
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Articulation voids deliver necessary suspension articulation and/or compression under loads.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Camber Bolt Kit

from

$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:
  • Designed to meet OE Form, Fit, and Function.
  • Performance tested to ensure durability and reduce tire wear.
  • Precision engineered for improved ride and steering response.
  • Hardware included for ease of installation (where applicable)
See More

Whiteline – Sway Bar Link (Part No.KLC30)

Sway Bar Link

from

$144.99
The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Whiteline – Sway Bar Link Bushing (Part No.W22259)

Sway Bar Link Bushing

from

$38.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K5330)

Camber Bolt Kit

from

$29.99
Camber Bolt Kit

Carquest Premium – Ball Joint (Part No.410-69062)

Ball Joint

from

$50.99
Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Pre-applied threadlocker keeps fasteners from loosening due to vibration
See More

Sankei 555 – Ball Joint (Part No.L2020445477SNK)

Ball Joint

from

$38.92
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Driveworks – Ball Joint (Part No.DW-K9513)

Ball Joint

from

$42.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Whiteline – Brace Sway Bar Mount Support (Part No.KBR15)

Brace Sway Bar Mount Support

from

$94.99
Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OEM mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.

Product Features:
  • Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Dorman – Sway Bar Bushing Kit (Part No.L1049683784DOR)

Sway Bar Bushing Kit

from

$34.06
Packaged in a box for ease and convenience, Dorman’s Suspension Stabilizer Bar Bracket includes the bracket, bushing, nuts and/or bolts. Everything necessary for a complete repair of the sway bar. Save time, money and labor by replacing only the part, not the entire assembly.

Product Features:
  • A necessary replacement for road safety
  • Direct replacement for a proper fit
  • Replacement restores suspension to proper operation
  • Rigorous quality control measures ensure conformance to product standards
See More

2015 Subaru Legacy Steering and Chassis Parts

You count on your 2015 Subaru Legacy to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 55 Steering and Chassis Parts ranging in price from $11.49 to $434.99, you’re sure to find everything you need for your 2015 Subaru Legacy.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 10 different brands like Imperial, Moog, and Driveworks. 2015 Subaru Legacy Steering and Chassis Parts start as low as $11.49!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,157 extensive product reviews on 2015 Subaru Legacy Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Transmission Oil Cooler Reinstallation Kit with 2.3 stars and Transmission Oil Cooler Replacement Hose with 3.0 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2015 Subaru Legacy below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2015 Subaru Legacy

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2015 Subaru Legacy running right for years to come. In our inventory you’ll find brands like Imperial, Moog, Driveworks, and even more.

Popular MOOG Steering and Chassis Parts

You’ll find popular MOOG brand products across Ball Joints and Camber Kits. All are waiting to get your 2015 Subaru Legacy back on the road. Some of the top-rated MOOG products in these categories are:
Ball Joint
from $54.99
(38)
Ball Joint
Suspension Ball Joint Kits
Camber Adjusting Kit
from $34.99
(9)
Camber Adjusting Kit
Camber Kits
Camber Adjusting Kit
from $48.99
(2)
Camber Adjusting Kit
Camber Kits

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2015 Subaru Legacy, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2015 Subaru Legacy Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2015 Subaru Legacy?

Out of 55 Steering and Chassis Parts for the 2015 Subaru Legacy, the most popular in our inventory are:
Ball Joint
from $42.99
(41)
Ball Joint
Lower Ball Joints
Camber Bolt Kit
from $20.29
(10)
Camber Bolt Kit
Front Alignment Kits
Ball Joint
from $50.99
This product is not rated
Ball Joint
Lower Ball Joints

What are the top-rated 2015 Subaru Legacy Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2015 Subaru Legacy based on customer reviews/ratings are:
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”
Transmission Oil Cooler Replacement Hose
from $14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses. 11/32″ is an odd size hose. Th”
Camber Bolt Kit
from $29.99
(1)
Camber Bolt Kit
“If you have a lifted Pathfinder you replace one of the bolts from the knuckle to the strut with this and allows you to adjust the camber to get the ve”