2015 Ram 3500 Drive Shafts and Axles
More 2015 Ram 3500 Drive Shafts and Axles
Find your specific 2015 Ram 3500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2015 Ram 3500 Drive Shafts and Axles
Spicer – Universal Joint (Part No.5-160X)
from
$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Dorman – Axle Flange Gasket Kit (Part No.926-966)
from
$21.49
Ensure a leak-free repair when servicing axle bearings or parking brake shoes. This axle shaft flange seal is a direct replacement for the original gasket and should be replaced every time work is performed at the axle flange.
Product Features:
See More
Product Features:
- Ideal replacement – this axle shaft flange seal directly replaces the original gasket without having to visit the dealer
- Required for routine service – this gasket should be replaced every time work is performed at the axle flange
- Durable construction – this axle shaft flange gasket is made of tough, durable materials for leak-free performance
- Quality tested – this flange gasket has been designed and tested for a guaranteed fit
Yukon Gear – 9.25" Aam Front Solid Axle Inner Axle Seal, 2003 & Up Dodge Ram 2500/3500 (Part No.30236)
from
$44.99
9.25″ AAM front solid axle inner axle seal, 2003 & up Dodge Ram 2500/3500.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Front inner axle seal
- Fits Chrysler 9.25″ front
National – Oil Seal (Part No.710874)
from
$40.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Yukon Gear – Square Pinion Flange For ’03 & Up Chrysler 10.5" & 11.5" – 4 Bolt Design (Part No.41202)
from
$187.99
Yukon square pinion flange for ’03 & up Chrysler 10.5″ & 11.5″. 4 bolt design.
Product Features:
See More
Product Features:
- Fits Chrysler 10.5″ and 11.5″
- 30 spline
- Square flange
- 4 bolt holes
Yukon Gear – Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal (Part No.41209)
from
$29.99
Product Features:
See More
- Adapter sleeve
- Fits GM 10.5″ 14 bolt truck and GM 11.5″
- Converts to triple lip seal
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Rear Axle Differential Vent (Part No.924-263)
from
$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-162)
from
$673.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-160)
from
$1141.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-163)
from
$496.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – Outer Stub Dust Shield For Chrysler 9.25" Front (Part No.33544)
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6109)
from
$121.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 06-10; RAM 11-11;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2006-2011
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.00 INCH / 51 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- WITH WINGS
- WITHOUT STUDS
- COLLAR FACES TRANSFER CASE
Anchor – Center Support Bearing Motor Mount: Rear, 1 Piece (Part No.6139)
from
$143.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 17-21; RAM 19-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2017-2021
- Weight approx: 5 Lbs
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6079)
from
$78.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1984-2020
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: SQUARE FRAME
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6110)
from
$104.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to DODGE 10-10; RAM 11-12;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2010-2012
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: HORSESHOE
- ALUMINUM ALLOY
Yukon Gear – Stub Axle (Part No.21838)
from
$289.99
Stub Axle
Yukon Gear – Stub Axle (Part No.21782)
from
$329.99
Stub Axle
Yukon Gear – 4340 Chromoly Outer Stub Axle For ’10 & Up Dodge Spin Free Kit (Part No.21777)
from
$298.99
Product Features:
See More
- Fits 2010 and up with Dodge Spin Free Kit
- Outer stub
- 12″ long
- 35 spline
- Uses 1555 U-Joint
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)
from
$47.99
Plug adapter for extra-large clamshell. No Return.
Product Features:
See More
Product Features:
- Plug adapter for Extra Large clamshell
- Fits carrier bearing puller
Popular 2015 Ram 3500 Drive Shafts and Axles Categories
2015 Ram 3500 Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2015 Ram 3500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 21 different Drive Shafts and Axles in our inventory ranging from $9.49 to $1,196.99. That means you can find the exact parts or products you need to keep that 2015 Ram 3500 running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2015 Ram 3500. Spicer, National, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2015 Ram 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2015 Ram 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2015 Ram 3500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2015 Ram 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your 3500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Anchor Drive Shafts and Axles
We carry Anchor parts in our stock across Center Support Bearings categories, plus more. For a 2015 Ram 3500, our most popular Anchor Drive Shafts and Axles include:
Top 2015 Ram 3500 Drive Shafts and Axles from Spicer
Spicer products are another trusted brand when it comes to Drive Shafts and Axles for your 2015 Ram 3500. Popular Spicer parts include:
FAQs for 2015 Ram 3500 Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2015 Ram 3500?
Out of 21 Drive Shafts and Axles for the 2015 Ram 3500, the most popular in our inventory are:
