2015 Porsche Macan Fuel and Emissions Systems
More 2015 Porsche Macan Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2015 Porsche Macan, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2015 Porsche Macan Fuel and Emissions Systems
Bosch – Fuel Pressure Sensor (Part No.C30011460730BOS)
from
$80.44
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.
Product Features:
See More
Product Features:
- Built-in circuit protection to ensure your electronics and computer systems stay unharmed
- High reliability of pressure sensing proved in gasoline and diesel direct injection systems
- Sturdy design, vibration resistant and thermal stability
Delphi – Direct Injection High Pressure Fuel Pump: With Gasket or Seal, Without Wiring Harness (Part No.HM10103)
from
$526.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Elring – Air Mass Sensor O-Ri (Part No.B3151384427ELR)
from
$9.20
Air Mass Sensor O-Ri
VNE Automotive – Fuel Pump Control Mo (Part No.E3006655072VNE)
from
$195.85
Fuel Pump Control Mo
NTK – Switching Oxygen Sensor: 4 Wire, 22.75" Long, Heated, Direct Fit (Part No.25653)
from
$99.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: Downstream, 4 Wire, 26.22" Long, Heated, Exact Fit (Part No.234-4878)
from
$133.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Oxygen Sensor: Downstream, 4 Wire, 26.69" Long, Heated, Exact Fit (Part No.234-4879)
from
$99.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – Switching Oxygen Sensor: 4 Wire, 20.75" Long, Heated, Direct Fit (Part No.25764)
from
$148.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
NTK – Switching Oxygen Sensor: 4 Wire, 19.75" Long, Heated, Direct Fit (Part No.25761)
from
$145.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 41.25" Long, Heated, Direct Fit (Part No.27058)
from
$181.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 33.5" Long, Heated, Direct Fit (Part No.24324)
from
$226.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 52.17" Long, Heated, Exact Fit (Part No.234-5102)
from
$240.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 17.75" Long, Heated, Direct Fit (Part No.27052)
from
$189.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Pressure Sensor (Part No.0261545078)
from
$76.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Popular 2015 Porsche Macan Fuel and Emissions Systems Categories
2015 Porsche Macan Fuel and Emissions Systems
You count on your 2015 Porsche Macan to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 15 Fuel and Emissions Systems ranging in price from $9.20 to $526.99, you’re sure to find everything you need for your 2015 Porsche Macan.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 7 different brands like Delphi, Bosch, and VNE Automotive. 2015 Porsche Macan Fuel and Emissions Systems start as low as $9.20!
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2015 Porsche Macan below to get started!
FAQs for 2015 Porsche Macan Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2015 Porsche Macan?
Out of 15 Fuel and Emissions Systems for the 2015 Porsche Macan, the most popular in our inventory are:
