2015 Honda Fit Cooling and Climate Controls

Name: Multi Purpose Relay
Brand: Carquest Premium
SKU: RAA1731
Price: 10.49 USD

Below you will find various in-demand Honda Cooling and Climate Controls, components and accessories for your 2015 Fit. Advance Auto Parts has popular Fit parts like Engine Cooling Parts, Air Conditioning Parts, HVAC Electrical Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Fit model years including 2011, 2012, 2013, 2014, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 2015 Honda Fit Cooling and Climate Controls below and start saving instantly.

Popular 2015 Honda Fit Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

Engine Cooling Fan Controllers

Radiator Caps

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

Coolant Temperature Sensors

AC Condenser Fan Motors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Blower Motor Resistors

AC Condensers

Radiator Fan Control Relays

Accumulator and Receiver Driers

ABS Speed Sensors

AC O-Ring and Gasket Kits

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Compressor Control Valves

Engine Coolant Temperature Sensor O-Rings

AC Refrigerant Pressure Sensors

Radiator Fan Switches

Radiator Cap Adapters

AC System Seal Kits

Climate Control Sun Sensors

HVAC Pressure Transducers

Essential Cooling and Climate Controls for 2015 Honda Fits

from

$10.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$104.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$10.99

New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$71.59

HVAC Binary Switch

from

$26.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$13.99

New Standard Replacement A/C System Seal Kit

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$109.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$145.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$26.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$10.99

The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.

Product Features:

Designed and manufactured with high quality materials, industry leading components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Relief Valve.
All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.

from

$16.49

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$19.79

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$31.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$229.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$101.99

New Platinum Pro Radiator Fan Assembly, 1.5 Liter L4 Engine With Automatic Transmission, With A/C, Includes Motor/Blade/Shroud

Product Features:

1.5 Liter L4 Engine With Automatic Transmission, With A/C, Includes Motor/Blade/Shroud
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$459.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$201.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$11.27

The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:

Meets Original Equipment specifications.
Made from premium materials.
Designed to function on open cooling systems and overflow reservoir type systems.

from

$125.99

This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.

Product Features:

Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – components are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$139.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$67.06

The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced impeller design.
Quality cast housing.
Precision bearings.
Resistant to corrosion.
Unitized bearing assembly.

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$14.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$221.99

HVAC Sun Sensor

from

$93.30

Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:

OEM Quality and Direct fit Application
Designed to the exact OEM specifications

from

$32.49

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

Upgrade your 2015 Honda Fit with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2015 Honda Fit, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Fit functioning at its best. At Advance Auto Parts, we offer a wide selection of 50 Cooling and Climate Controls for the 2015 Honda Fit, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2015 Honda Fit at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.87 to $376.99, with an average price of $79.63. Our 50 Cooling and Climate Controls in stock come from 15 trusted brands, so you’re sure to find the right part for your 2015 Honda Fit without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2015 Honda Fit, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. With 1,722 customer reviews and counting, our 2015 Honda Fit Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2015 Honda Fit is always ready to roll. We’re committed to providing you with everything you need to keep your Fit in top shape, all in one place. Start shopping confidently below for your 2015 Honda Fit!

Best-Selling Engine Cooling Parts for 2015 Honda Fits

Enhance the driving experience in your Honda with 28 quality Engine Cooling Part components, starting at $1.87.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$11.27

Meets Original Equipment specifications.
Made from premium materials.
Designed to function on open cooling systems and overflow reservoir type systems.

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$14.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$16.49

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$67.99

Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
10″ Diameter
650 CFM
Use as a pusher or puller fan

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$12.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$10.49

from

$19.79

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$38.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$16.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$210.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$196.35

Radiator

from

$185.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$109.99

The CARQUEST New Water Pump features all new, original equipment-quality components for proper fit and long-life performance. Each pump includes heavy-duty unitized bearings, pressed-on hubs, precision machined housings, unitized seals and optimal impeller clearance, plus all new water pumps are 100% factory tested to assure the highest quality product. Each unit is built to meet or exceed all Original Equipment specifications and is validated for fit, form, and function. Also, application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust.

Product Features:

Durable housing features precisely machined mounting surfaces for proper sealing
All gaskets or seals necessary for installation are supplied with pump
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Follow all enclosed instructions to maximize pump life and validate warranty

from

$103.99

New Platinum Pro Radiator Fan Assembly

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$94.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$90.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$38.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$29.49

Engine Coolant Temperature Sensor

from

$7.89

WATER TEMP. SENSOR

from

$1.87

Water Temp Sensor O-

Most Popular 2015 Honda Fit Air Conditioning Parts

Customize your Honda with 16 Air Conditioning Parts products like AC Compressor Without Clutch, Expansion Valve and Orifice Tubes, and AC Condensers, all priced under $376.99.

show more show less

from

$14.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$13.99

New Standard Replacement A/C System Seal Kit

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$66.84

HVAC Pressure Transd

A/C New, with Clutch, with 10SRE11C Compressor

from

$376.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$239.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$227.99

from

$125.99

Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – components are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$122.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$102.99

New Platinum Pro A/C Condenser Fan Assembly

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$99.02

Koyo engineers design the A/C Condensers to meet the demanding OE specifications, offering a true plug and play installation: No drilling, cutting, relocating, or stretching to get our radiators to fit properly.

Product Features:

Japanese Engineered, OE Equivalent Quality
Meet or exceed OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Compatible with R12 and R134a refrigerant.
Applicable gaskets and O-rings supplied with each part.

from

$71.99

New Platinum Pro A/C Condenser, 1.5 Liter L4 Engines

Product Features:

1.5 Liter L4 Engines
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.00

A/C Expansion Valve

from

$31.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$23.99

from

$19.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$10.99

Designed and manufactured with high quality materials, industry leading components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Relief Valve.
All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.

Top Picks for 2015 Honda Fit HVAC Electrical Parts

Upgrade Honda Fits with top-quality HVAC Electrical Parts parts, including 1 OEM and aftermarket selections for your 2015 model.

show more show less

from

$221.99

HVAC Sun Sensor

In-Demand Blower Motor and Related Products for 2015 Honda Fits

Select from 3 premium Blower Motor and Related Products parts for your 2015 Honda Fit, with prices ranging from $64.99 to $177.22.

show more show less

from

$145.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$177.22

Blower Motor

from

$64.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

Most Sold 2015 Honda Fit Heating Parts

Explore our best-selling Honda parts for the 2015 Fit among 2 OEM and aftermarket options starting from $26.49.

show more show less

from

$26.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$119.99

Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”.
Engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Top-Rated Cooling and Climate Controls Brands For Your 2015 Honda Fit

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2015 Honda Fits. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2015 Fit start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2015 Honda Fit Cooling and Climate Controls

When it comes to maintaining or upgrading your 2015 Honda Fit, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2015 Honda Fit. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 2015 Honda Fit Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2015 Honda Fit owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2015 Fit, Advance Auto Parts carries a full inventory of 21 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Honda in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $10.49 to $376.99, plus, with more than 138 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$38.99

This product is not rated

Coolant Temperature Sensor with O-Ring

“”

from
$145.99

This product is not rated

HVAC Blower Motor Resistor

“”

from
$10.49

This product is not rated

Multi Purpose Relay

“”

FAQs for 2015 Honda Fit Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2015 Honda Fits?

Out of 50 Cooling and Climate Controls that fit 2015 Honda Fits, the following parts are the top sellers:

Radiator Cap: 16 PSI (17110029) – $14.99
Standard Thermostat: 170 Degrees (11921767) – $12.99
Multi Purpose Relay (12459945) – $10.49

What’s the price range for 2015 Honda Fit Cooling and Climate Controls?

Cooling and Climate Control prices for the 2015 Honda Fit start at $1.87 and go up to $376.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2015 Honda Fit?

The average price for Cooling and Climate Controls for the 2015 Honda Fit is $79.63. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Honda Fit model years?

Yes, we currently carry Cooling and Climate Controls for 13 model years of Honda Fits between 2007 and 2020. Cooling and Climate Controls are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2014, 2013, 2012, and 2011.

What are the cheapest Cooling and Climate Controls for my 2015 Honda Fit?

The cheapest 2015 Honda Fit Cooling and Climate Controls we carry in stock are:

Water Temp Sensor O- (12109288) – $1.87
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
WATER TEMP. SENSOR (50222382) – $7.89
Multi Purpose Relay (12459945) – $10.49
AC Pressure Relief Valve (12555013) – $10.99

What are the top-rated Cooling and Climate Controls that fit the 2015 Honda Fit?

Out of 1,722 reviews by customers, our 2015 Honda Fit Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2015 Honda Fit and their top-rated products:

Engine Cooling Parts
- Sankei Switches Radiator Cap (10743822) – $11.27
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Adjustable Thermostatic Fan Control (6016936) – $22.99

What types of Cooling and Climate Controls do you sell for my 2015 Honda Fit?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2015 Honda Fit:

Can I get help with 2015 Honda Fit Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Cooling and Climate Controls and more.

What is your return policy for Honda Fit Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Honda Fit Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2015 Honda Fit Cooling and Climate Controls

Carquest Premium – Multi Purpose Relay (Part No.RAA1731)

Carquest Premium – Blower Motor: With Wheel (Part No.76953)

KAI – A/C Desiccant Element (Part No.ARD010152)

Santech – HVAC Binary Switch (Part No.R21351989513SII)

Factory Air – System Mounted Pressure Transducer (Part No.37312)

KAI – A/C System Seal Kit (Part No.FTT010696)

Carquest Premium – Heater Core (Part No.918076)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1524)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic/Rubber, 1 Pack (Part No.54370)

Carquest Premium – AC Pressure Relief Valve (Part No.ACA1333)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)

Motorad UltraStats – Thermostat: 170 Degrees (Part No.5328-170)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1744)

Felpro – Engine Water Pump Gasket (Part No.35961)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6372)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

KAI – Cooling Fan Assembly (Part No.HO3115150)

Carquest Premium – A/C New, with Clutch, with TRSE07 Compressor (Part No.T98579)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813068)

Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)

Dorman – A/C Condenser Fan Assembly: Cost Effective And Reliable (Part No.621-375)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4024)

NPW – NPW Water Pump (Part No.G3000338499NPW)

Felpro – Engine Coolant Temperature Sensor O-Ring (Part No.72926)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26815)

Carquest Premium – HVAC Sun Sensor (Part No.WTA2243)

DENSO – First Time Fit A/C Expansion Valve (Part No.R1045118918ND)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39134)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Motorad – Standard Thermostat: 170 Degrees (Part No.328-170)

Carquest Premium – Multi Purpose Relay (Part No.RAA1731)

Motorad UltraStats – Thermostat: 170 Degrees (Part No.5328-170)

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1203)

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54228)

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-374)

Koyo Cooling – Radiator (Part No.G1000657130KCS)

Carquest Premium – Radiator (Part No.813451)

Carquest Premium – Engine Water Pump (Part No.T2470)

KAI – Cooling Fan Assembly (Part No.HO3115166)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Carquest Premium – Standard Thermostat: With Seal, 172 Degrees (Part No.1077-172)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Beck/Arnley – Thermostat (Part No.143-0855)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2282)

Worldpac – WATER TEMP. SENSOR (Part No.C60203512379ANA)

Ishino Stone – Water Temp Sensor O- (Part No.C6060550706ISH)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26815)

KAI – A/C System Seal Kit (Part No.FTT010696)

Santech – HVAC Pressure Transd (Part No.R21431998373SII)

Carquest Premium – A/C New, with Clutch, with 10SRE11C Compressor (Part No.T168323)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC2671)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA4015)

Dorman – A/C Condenser Fan Assembly: Cost Effective And Reliable (Part No.621-375)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714441)

KAI – Condenser Fan Assembly (Part No.HO3113135)

Koyo Cooling – A/C Condenser (Part No.R1030660964KCS)

KAI – A/C Condenser (Part No.CND4441)

Santech – A/C Expansion Valve (Part No.R1045660951SII)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1744)

Carquest Premium – Block Type Expansion Valve w/o Solenoid (Part No.T39535)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83233)

Carquest Premium – AC Pressure Relief Valve (Part No.ACA1333)

Carquest Premium – HVAC Sun Sensor (Part No.WTA2243)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1524)

VDO – Blower Motor (Part No.R2031661211VDO)

Carquest Premium – Blower Motor: With Wheel (Part No.75060)

Factory Air – System Mounted Pressure Transducer (Part No.37312)

Carquest Premium – Heater Core (Part No.910733)