2015 Ford F-550 Super Duty Engine Oils

Castrol GTX High Mileage 5W-20 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy(2)
• (1) Based on API and ACEA volatility specifications
• VW 504 00 / 507 00
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• ENHANCED MAXLIFE TECHNOLOGY PREVENTS engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• TREAT AND PREVENT LEAKS with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% EXTRA DEFENSE AGAINST DEPOSITS, sludge, corrosion and rust via interior-cleansing detergents
• EXTREME TEMPERATURE PROTECTION through our high-quality base oils and superior viscosity modifiers
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• Enhanced Wear Protection: Valvoline Full Synthetic High Mileage with MaxLife Technology is fortified with advanced wear additives to safeguard critical engine components, ensuring longevity for vehicles with over 75,000 miles.
• Superior Friction-Fighting Agents: This motor oil includes friction-fighting agents that help reduce friction and heat, protecting your engine from the leading causes of breakdown and expensive repairs.

Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• MB-Approval 229.5
• Exceeds API SP/SN PLUS/SN/SM
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Seal conditioners rejuvenate aging engine seals to help stop and prevent oil leaks
• Extra wear protection helps prevent future engine wear
• Extra detergents help keep older engines cleaner by bonding with and removing sludge and deposits
• Anti-oxidants help prevent oil breakdown preventing engine-clogging sludge and deposit formation
• Advanced Synthetic Blend Formulation: Valvoline High Mileage with MaxLife Technology features an advanced synthetic blend that provides superior protection for engines with over 75,000 miles.
• API SN with SN PLUS Specification: Meets the API SN with SN PLUS specification, offering protection for gasoline direct-injected engines from low-speed pre-ignition, making it suitable for both high mileage and newer cars.

Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:

• 3X Stronger than the leading full synthetic (1)
• 10X Better high stress performance (2)
• 20,000 miles between oil changes (3)
• (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
• (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
• (3) Or one year, whichever comes first
• Approved and Licensed Specifications:
• ILSAC GF-6
• Exceeds API SP/SN PLUS/SN/SM
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Castrol GTX High Mileage 5W-20 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.

Product Features:

• Phosphorus Replacement Technology helps extend emission system life
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (1)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (2)
• (2) Based on API and ACEA volatility specifications
• CVT Applications: All of Honda CVTs except 2001-2007 Model Honda Fit/Jazz , Hyundai/Kia SP-III, Mazda CVTF 3320, Mitsubishi DIAQUEEN ATF SP-III, CVT Fluid J1, CVT Fluid J4, CVT Fluid J4+, Ford CVT23, Mini Cooper EZL799, Mercedes-Benz 236.20
• (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, making it the perfect choice for high mileage vehicles.

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge

Product Features:

• Premium-quality base oils and anti-wear additives that help extend engine life
• Superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• ILSAC GF-6
• Meets Ford WSS-M2C945-B1

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements. Helps minimize engine deposits and wear while helping prevent oxidation and rust corrosion. Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil is a premium-quality passenger car motor oil recommended by Ford Motor Company and meets all warranty requirements. It is API Certified for gasoline engine service ILSAC GF-5 and meets API SN/Resource Conserving and SN PLUS. Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality, synthetic/hydroprocessed base oils and specially designed performance additives, which help minimize engine deposits and wear, protect against high-temperature oxidation and turbocharger deposits, low-temperature gelling, rust corrosion and foaming.

Product Features:

• Meets WSS-M2C945-B1 and SN PLUS, therefore it can reduce oil derived low speed pre-ignition
• The friction-reducing technology in this motor oil provides superior wear protection and energy-conserving characteristics
• Significant improvement in fuel economy when compared to SAE 5W-30 and 10W-30 motor oils
• Ford Recommended: The only motor oil recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles, ensuring optimal performance and compatibility.
• Premium Quality: Motorcraft« SAE 5W-20 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality synthetic/hydroprocessed base oils and specially designed performance additives.
• Engine Protection: Helps minimize engine deposits and wear while protecting against high-temperature oxidation, turbocharger deposits, low-temperature gelling, rust corrosion, and foaming.
• 5 Quart Convenience: Available in a convenient 5-quart container, making it easy to perform oil changes on your Ford, Lincoln, or Mercury vehicle.

Castrol EDGE High Mileage 5W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Porsche A40
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C960-A1

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements. 5W20 and 5W30 oils available in 5 qt. jugs. Helps minimize engine deposits and wear while helping prevent oxidation and rust corrosion. Motorcraft Full Synthetic Oils provide the highest level of performance for Ford Motor Company vehicles. Meets ILSAC GF-5 certification requirements. Excellent for use in severe service conditions. 5W50 Full Synthetic is recommended for use in the Ford GT, Shelby GT500TM and Boss 302. Motorcraft Super Duty and Full Synthetic Diesel Oils are designed for new generation, low emission diesel engines. Meets API Service Category CJ-4. 15W40 Super Duty Diesel oil available in 5 quart jugs. 5W40 Full Synthetic Diesel Motor Oil helps provide a high level of protection.

Product Features:

• Meets WSS-M2C945-B1 and SN PLUS, therefore it can reduce oil derived low speed pre-ignition
• The friction-reducing technology in this motor oil provides superior wear protection and energy-conserving characteristics
• Significant improvement in fuel economy when compared to SAE 5W-30 and 10W-30 motor oils
• Ford Recommended: The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles, ensuring optimal performance and compatibility.
• Meets Certification Requirements: Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements, guaranteeing high-quality standards.
• Engine Protection: Helps minimize engine deposits and wear while preventing oxidation and rust corrosion, extending engine life.
• Versatile Oil Options: Available in 5W20 and 5W30 oils in 5 qt. jugs, catering to different engine needs and preferences.
• Severe Service Conditions: Excellent for use in severe service conditions, providing reliable performance under demanding circumstances.

Motorcraft® SAE 15W-40 Super Duty Diesel Motor Oil is a high-quality light and heavy-duty diesel engine oil recommended by Ford Motor Company. It is particularly recommended for use in Ford vehicles equipped with Power Stroke® Diesel engines, as well as in other diesel engine applications where the manufacturer recommends an oil of this viscosity grade and quality. It meets Ford WSS-M2C171-F1, required for use in Power Stroke® Diesel engines designed to meet 2017 on-highway exhaust emission standards and requiring ultralow sulfur diesel fuel as well as meeting the requirements for previous model year diesel engines.

Product Features:

• Motorcraft® SAE 15W-40 Super Duty Diesel Motor Oil is a high-quality diesel engine oil formulated with premium hydroprocessed base oils and unique additive technology. It satisfies the warranty requirements of Ford Motor Company, as well as most other dom
• Motorcraft® SAE 15W-40 Super Duty Diesel Motor Oil is a high-quality diesel engine oil formulated with premium hydroprocessed base oils and unique additive technology.
• Motorcraft® SAE 15W-40 Super Duty Diesel Motor Oil is formulated for improved oxidation protection and contains more than 1000 ppm phosphorus to improve wear protection. .
•  Provides excellent performance in older-generation diesel engines operating on high-sulfur fuel
• Do not use in gasoline engines equipped with catalysts
• Designed for, low emission diesel engines providing excellent soot control, protection against wear, deposits, rust and corrosion, foaming, sludge formation, high temperature oxidation and thickening

Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality light- and heavy-duty diesel engine oil recommended by Ford Motor Company. It is particularly recommended for use in Ford vehicles equipped with Power Stroke® Diesel engines, as well as in other diesel engine applications where the manufacturer recommends an oil of this viscosity grade and quality. It meets Ford WSS-M2C171-F1, required for use in Power Stroke® Diesel engines designed to meet 2017 on-highway exhaust emission standards and requiring ultralow sulfur diesel fuel as well as meeting the requirements for previous model year diesel engines

Product Features:

• Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality diesel engine oil formulated with premium hydroprocessed base oils and unique additive technology.
• It satisfies the warranty requirements of Ford Motor Company, as well as most other domestic and import diesel engine manufacturers. It meets the requirements of Cummins CES 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EOS-4.5 and API Service CK-4
• Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil is formulated for improved oxidation protection and contains more than 1000 ppm phosphorus to improve wear protection.
• Designed for low emission diesel engines providing excellent soot control, protection against wear, deposits, rust and corrosion, foaming, sludge formation, high temperature oxidation and thickening, as well as protecting exhaust aftertreatment systems su
• Do not use in gasoline engines equipped with catalysts
• Provides excellent performance in older-generation diesel engines operating on high-sulfur fuel

Castrol EDGE High Mileage 5W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Reduces leaks, oil burnoff and power robbing deposits
• 15,000 miles between oil changes (1)
• (1) Or one year, whichever comes first
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM
• ILSAC GF-6
• Meets engine test requirements of Chrysler MS 6395
• Meets Ford WSS-M2C945-B1
• Meets Ford WSS-M2C960-A1

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements. 5W20 and 5W30 oils available in 5 qt. jugs. Helps minimize engine deposits and wear while helping prevent oxidation and rust corrosion. Motorcraft Full Synthetic Oils provide the highest level of performance for Ford Motor Company vehicles. Meets ILSAC GF-5 certification requirements. Excellent for use in severe service conditions. 5W50 Full Synthetic is recommended for use in the Ford GT, Shelby GT500TM and Boss 302. Motorcraft Super Duty and Full Synthetic Diesel Oils are designed for new generation, low emission diesel engines. Meets API Service Category CJ-4. 15W40 Super Duty Diesel oil available in 5 quart jugs. 5W40 Full Synthetic Diesel Motor Oil helps provide a high level of protection.

Product Features:

• Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality light- and heavy-duty diesel engine oil recommended by Ford Motor Company. It is particularly recommended for use in Ford vehicles equipped with Power Stroke« Diesel engines, as well as
• Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality diesel engine oil formulated with premium hydroprocessed base oils and unique additive technology. It satisfies the warranty requirements of Ford Motor Company, as well as most other dom
• Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is formulated for improved oxidation protection and contains more than 1000 ppm phosphorus to improve wear protection. Designed for low emission diesel engines providing excellent soot control, protection
• Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is recommended for use in 7.3L, 6.4L and 6.0L Powerstroke« diesel engines from 0 Deg. F (-18 Deg. C) to 50 Deg. F (10 Deg. C) and 6.7L Powerstroke« diesel engines above 0 Deg. F (-18 Deg. C)
• Do not use in gasoline engines equipped with catalysts