2015 Ford F-150 Air Suspension and Kits

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Max Performance Synthetic Power Steering Fluid

Shock Kit

Shock Kit

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers for the 2015-17 Ford F-150 4wd These 2.5″ diameter triple bypass shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit has 3 externally adjustable bypass tubes and offers superior off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle. *This aFe Control Suspension product is designed and engineered in our Corona, California facility.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• 2.5 in. Dia. Triple Bypass For Position Sensitive Damping
• Multi-Seal Carrier To Ensure Zero Leakage

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Looking to add larger tires or add that go anywhere capability and feel? Then look no further than a TrailFX mid lift suspension kit. Increased ground clearance, visibility, and a smoother ride are all benefits of a mid lift suspension kit. Kits contain all required, ready to install components in one box under one part number.

Product Features:

• Designed For Additional Clearance For Larger Wheel And Tire Combinations
• All Necessary Components Included In One Box
• Maintains Factory Ride
• Shock Replacement Not Required
• X Guard Plus Powertrain Warranty
• Limited Lifetime Warranty and Limited 1 Year Warranty On Wearable Components

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Puts The Rake Back In Truck For Hauling Or Towing
• Eliminates The Danger Of Having To Stack Blocks
• Allows To Fully Lift Truck While Maintaining The Use It Like It Was Originally Intended
• Easy To Install

ReadyLift leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed! The 66-2050 strut extension provides 3″ of lift which gives clearance to add up to 35″ wheels and tires to the Mark LT. Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLift can be installed one to two hours and costs less than the price of a single custom wheel.

Product Features:

• Keeps your factory ride – Guaranteed
• Will never wear, break or fail – Guaranteed
• Toughest finish – Guaranteed
• Safest way to level lift – Guaranteed

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Maintains Factory Ride
• Allows For Rear Rake For Towing Or Hauling
• Simple Installation
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• Actual Lift Varies Depending On Size Of Factory Block Being Removed

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

• Maintains Factory Ride
• Allows For Rear Rake For Towing Or Hauling
• Simple Installation
• Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials
• Actual Lift Varies Depending On Size Of Factory Block Being Removed

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

• Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
• Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
• Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
• Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load
• Limited Lifetime Warranty

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

• Keep The Vehicle Level: Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
• Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
• Reduce Suspension Fatigue, Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
• Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
• Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load

aFe Control introduces these Sway-A-Way High Performance replacement Coilovers for the 2010-2014 Ford F-150 SVT Raptor. These giant 3″ diameter Coilovers feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers remote reservoirs and better off road damping curves without sacrificing any on road comfort or handling. These front Coilovers are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. The kit comes pre-set for 2″-2.5″ of lift. Also included is a spanner wrench for you to adjust your ride height to find your perfect blend of performance and style. This aFe Control Suspension product is designed and engineered in our Corona, California facility.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Give your Ford® F-150 an aggressive stance with the Rancho® 3-in. suspension system. This premium suspension system features upper control arms with preinstalled ball joints and Rancho RS9000®XL shocks and struts that allow customized damping control.

Product Features:

• ORDERING INFO — Box 3 of 3 for master kit RS66507R9, must order RS66507R9-1, RS66507R9-2 and RS66507R9-3 for a complete kit
• COMPATIBILITY — Designed for Ford F-150 trucks
• LIFTS AND LEVELS VEHICLE — Fits up to 35-in. tires, system lifts front by 3-in. while rear blocks raise the back an additional 1.5-in. to level the truck (trimming required for 35-in. tires, bumpers, winches, etc. affect height)
• COMPLETE SOLUTION — Includes Rancho RS9000®XL struts and rear shocks, upper control arms with ball joints, rear block kit, sway bar spacers and mounting hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks and struts feature nine-position knob for customized damping control and firmness for on-road and off-road flexibility
• BUILT TO PERFORM — Control arms keep the preinstalled ball joints in their normal operating range, provide additional caster to aid in alignment and add wheel travel
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life while control arms feature OE-style rubber bushings and ball joints for easy maintenance and quiet operation
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Maintains OE alignment specs and won’t affect electronic stability system, allows the use of OE wheels/tires, must use OE springs and top mounting components (tire size varies between manufacturers)