2015 Ford Explorer Bodies and Fender Parts

Damaged A-pillar trim bringing down a vehicle’s appearance? This replacement pillar trim restores a like-new appearance to the windshield pillar when the original has become deformed or detached.

Product Features:

• Direct replacement – this replacement A-pillar trim matches the fit and appearance of the original part
• Restores appearance – this replacement A-pillar trim restores a like-new appearance to the windshield pillar
• Easy installation – no special tools required
• Vehicle tested – this trim piece has been vehicle try-on tested to ensure proper fit

Damaged A-pillar trim bringing down a vehicle’s appearance? This replacement pillar trim restores a like-new appearance to the windshield pillar when the original has become deformed or detached.

Product Features:

• Direct replacement – this replacement A-pillar trim matches the fit and appearance of the original part
• Restores appearance – this replacement A-pillar trim restores a like-new appearance to the windshield pillar
• Easy installation – no special tools required
• Vehicle tested – this trim piece has been vehicle try-on tested to ensure proper fit

For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″ wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to speed up installation and ensure stable footing. This set of running boards is designed to fit specific years of the Ford Explorer (see application information to verify compatibility with your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.

Product Features:

• Sleek design with rounded ends to complement the look of modern SUVs and CUVs
• Extruded aluminum base to be lightweight and rust-free
• Stainless steel front trim with carbide black powder coat for a rust-free accent
• Flat profile and 5″ width provide a comfortable step
• Full-length, tough plastic treads offer a reliable, non-skid surface
• Universal track mounting system for easy, secure installation
• Vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Stylish Modern Design
• 5 1/2 in. Step Surface Width
• Corrosion Resistant Extruded Aluminum Board
• Injection Molded End Caps
• Slip Resistant Textured Step Surface
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit For End Caps PN[27-60000]

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

New CAPA Certified Premium Replacement Front Lower Valance Panel, Without Tow Package, Dark Gray Textured Finish, To 1/10/2013 Production Date

Product Features:

• Without Tow Package, Dark Gray Textured Finish, To 1/10/2013 Production Date, Made Of Olefinic Thermoplastic Elastomer
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Fender Brace

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender Brace

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost
• Pack of 3

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New, Standard Replacement Passenger Side Wheel Molding, Paint To Match, Fender-Mounted

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

New, Standard Replacement Passenger Side Wheel Molding, Front Section, Without NBX Package

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

New Standard Replacement Passenger Side Fender Liner

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender Liner

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Fender Liner, Front Extension

Product Features:

• Front Extension, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This exterior door handle trim is designed to match the fit and appearance of the original reinforcement on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this exterior door handle trim is designed to match the fit and appearance of the original reinforcement on specified vehicles
• Restores functionality – this trim is made to fully restore appearance and functionality after the original trim fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicle Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Laser Measured MudFlaps are custom fit and protect your vehicle fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle wheels. No drilling required and installs in Minute. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the Weathertech MudFlap will offer undeniable vehicle protection.

Product Features:

• Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
• MudFlap Will Offers Undeniable Vehicle Protection
• Features The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provides Protection For Your Vehicle Most Vulnerable Areas: Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Laser Measured For A Perfect Fit Set Literally Mounts-In-Minutes Without The Need For Wheel Or Tire Removal
• Most Importantly Mounts Without The Need For Drilling Into The Vehicles Fragile Painted Metal Surface

The WeatherTech MudFlap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicle Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and 91. To ensure a perfect fit Vehicle-Specific Mounting Kits are required and are purchased separately. Each mounting kit is exactly machined for a No-Drill Installation.

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad
• Lifetime Warranty

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Provides Moderate Protection Against Road Hazards And Debris

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Ford Explorer (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step