Name: Iridium Long Life Spark Plug
Brand: DENSO
SKU: F1000316471ND
Price: 16.00 USD

from

$16.00

The DENSO Iridium Long Life spark plug was specifically designed for long service life and consistent performance in the latest, most advanced production cars DENSO’s patented iridium alloy is more durable than even platinum, allowing the center electrode to be shrunk to only 0.7mm in diameter. This produces a dramatic improvement in ignitability and spark plug life. Closely related to platinum and exhibiting even tougher qualities, the rare metal iridium is an ideal material for spark plugs. A fine-wire, 0.7mm iridium center electrode is 360-degree laser welded in place using an exclusive DENSO process, and then matched to a platinum ground electrode. This pair of precision-formed, premium-metal electrodes dramatically extends the plug’s useful life.

Product Features:

Fine-wire iridium center electrode
Platinum ground electrode
360 degree laser-welded spark tip
Sustained spark performance over 100,000 miles
Withstands higher pressures and temperatures

from

$6.49

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.52 is a 14mm, 0.375 reach plug with a gasket seat. It fits a wide variety of GM applications from the 50s to early 80s, and is generally the correct plug for older small block Chevrolet engines. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

from

$5.79

ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
Pure copper core provides great heat transfer and helps maximize plug durability
Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
Ribless insulator helps optimize plug to boot seal
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
High-Quality Suppressors: Designed to help prevent misfiring, ensuring smooth and reliable engine performance.

from

$24.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.

from

$18.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$210.99

When you are looking to replace that old worn out coil or are modifying the engine, you can turn to ACCEL for your ignition coil needs. ACCEL SuperCoils are the perfect addition to your late model Dodge, Chrysler or Jeep. Available in the famous ACCEL yellow, ACCEL SuperCoils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils that bolt directly into factory locations and plug in to factory wiring for a seamless installation.

Product Features:

Highly specialized silicone magnetic steel cores with optimized windings
High temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment
The ACCEL bodies are molded in a high dielectric strength material
These are a direct performance bolt on upgrade.
Installation usually takes less than an hour
ODB II compatible ¿ will not trip an engine code
ODB II compatible ┐ will not trip an engine code

from

$599.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

Advanced Bobbin Technology
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion
8 Pack

from

$54.99

Encore Automotive Genuine OE Ignition Coil converts a 12-volt current to the high voltage energy needed to create an electric spark required to ignite the air-fuel mixture. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.

Product Features:

Genuine OE Part
Direct fit and OE performance to ensure reliable voltage at all speeds
High quality materials provide durability and protection against corrosion
Consistent and effective combustion

from

$39.99

BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
Neodymium magnet produces max high voltage output at all speeds
Stainless steel spring resists corrosion
Tin-plated brass terminals improve electrical contact and protect against corrosion
High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown
Silicone rubber boot withstands extreme heat to ensure superior insulation

from

$71.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$48.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

One of the nastiest production engines to come out of Detroit in the last twenty years has to be the late model Hemi and it can get even nastier with the addition of the ultra-high output E3.614 Hemi Coil. With more than double the energy output of a stock coil, E3s Hemi coil features a stainless steel spark plug contact ring and optimized resistance and inductance values which increase output at higher RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra-long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound. Ideally suited for a wide range of both naturally aspirated and forced induction racing applications, E3.614 fits 5.7L, 6.1L, and 6.4L Hemi engines from 2006 to current model years. When coupled with an E3 Spark Plug featuring DiamondFIRE Technology, youll experience tire shredding power at its finest.

Product Features:

Double the energy output of a stock coil
High temperature expoxy provides excellent thermal conductivity and long life
Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
Fits 5.7L, 6.1L and 6.4L 2006-Current Hemi engines
Crosses to MSD 8255

from

$9.79

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$154.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$158.99

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Incl. both socket-style and spark plug-style boots and terminals
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [4] 90 Deg. Boots/Terminals
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$169.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance

from

$47.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$41.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$40.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$35.99

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$35.99

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$6.79

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

from

$359.99

Ignition Switch

from

$96.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$42.99

Ignition Switch

from

$44.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$212.99

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:

Ceramic boots withstand up to 2,000░ Fahrenheit
Ceramic boots withstand up to 2,000° Fahrenheit
8mm double silicone construction black wire rated at 600░ F rated
8mm double silicone construction black wire rated at 600° F rated
500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
Universal and custom fit applications
Universal And Custom Fit Applications

from

$11.29

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression