2015 Chevrolet Traverse Suspension Parts
More 2015 Chevrolet Traverse Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2015 Chevrolet Traverse, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2015 Chevrolet Traverse Suspension Parts
ACDelco – Control Arm (Part No.L2000668864ACD)
from
$211.58
Control Arm
KYB – STRUT BELLOW (Part No.L303734949KYB)
from
$27.49
STRUT BELLOW
ACDelco – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT146)
from
$26.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Rear Control Arm (Part No.522-868)
from
$73.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Suncore – Quick Strut (Part No.55S11670)
from
$144.99
Quick Strut
Monroe – Max-Air Air Shock Absorber (Part No.MA833)
from
$160.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
MOOG – Strut Bellows (Part No.K90460)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Strut-Mate Coil Spring Insulator (Part No.909924)
from
$20.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172949)
from
$233.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.182949)
from
$176.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
- EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
- CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
- COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
Suncore – Quick Strut Kit (Part No.2-55S11680-001)
from
$254.99
Quick Strut Kit
Suncore – Quick Strut Kit (Part No.2-55S11670-001)
from
$279.99
Quick Strut Kit
Carquest Premium – Suspension Yaw Sensor (Part No.YWC1014)
from
$307.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Suspension Yaw Sensor (Part No.YWC1092)
from
$314.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution
See More
Monroe – OESpectrum Light Truck Shock Absorber (Part No.37315)
from
$95.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- 1-3/8 inch (34.9 mm) bore (On most applications)
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
Monroe – Gas-Matic LT Shock Absorber (Part No.59417)
from
$76.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
KYB – Jounce Bumper and Bellows (Part No.SB101)
from
$18.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Coil Spring Set (Part No.81609)
from
$275.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.81606)
from
$192.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Control Arm Link (Part No.RK641887)
from
$51.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Rare Parts – CONTROL ARM LINK (Part No.RP12812)
from
$95.99
CONTROL ARM LINK
Monroe – Strut-Mate Strut Mounting Kit (Part No.907986)
from
$101.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Dorman – Suspension Control Arm Bushing (Part No.523-201)
from
$18.79
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm Bushing (Part No.523-035)
from
$80.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Control Arm Bushing (Part No.K201187)
from
$58.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
Popular 2015 Chevrolet Traverse Suspension Parts Categories
2015 Chevrolet Traverse Suspension Parts
You count on your 2015 Chevrolet Traverse to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 49 Suspension Parts ranging in price from $6.29 to $279.99, you’re sure to find everything you need for your 2015 Chevrolet Traverse.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 11 different brands like Valvoline, Monroe, and Moog. 2015 Chevrolet Traverse Suspension Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 417 extensive product reviews on 2015 Chevrolet Traverse Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut Bellows with 3.0 stars and Strut-Mate Strut Boot Kit with 2.6 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2015 Chevrolet Traverse below to get started!
Top-Rated Suspension Parts Brands For Your 2015 Chevrolet Traverse
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2015 Chevrolet Traverse running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.
Popular Valvoline Suspension Parts
You’ll find popular Valvoline brand products across Air Suspension and Kits. All are waiting to get your 2015 Chevrolet Traverse back on the road. Some of the top-rated Valvoline products in these categories are:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 2015 Chevrolet Traverse, and some of our most reviewed Monroe parts include:
FAQs for 2015 Chevrolet Traverse Suspension Parts
What are the most purchased Suspension Parts for the 2015 Chevrolet Traverse?
Out of 49 Suspension Parts for the 2015 Chevrolet Traverse, the most popular in our inventory are:
from
$233.99
(1)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Suspension Strut and Coil Spring Assemblies
What are the top-rated 2015 Chevrolet Traverse Suspension Parts?
Top-rated Suspension Parts for your 2015 Chevrolet Traverse based on customer reviews/ratings are:
from
$37.49
(9)
Strut-Mate Strut Boot Kit
“The boot snd bumper fit perfectly knto the upper strut mount on my 2011 f150, although they dont fit under the upper rubber for the spring like OEM th”
