2015 BMW M235i Engine Parts

Access Cover Plate

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

KS crankshaft main bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS main bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:

• Original Equipment Manufacturer
• Maximum Load-Bearing Capacity
• Low Wear and Friction
• Advanced Surface Coatings

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
• PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
• OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR — Fel-Pro« gasket sets include every part needed for the repair unless otherwise noted
• ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro« engineers through rigorous research and development
• ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro« engineers through rigorous research and development

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

• Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
• Various designs specifically adapted to the area of application ensure excellent functionality and performance
• High-performance FPM guarantees optimum leak tightness

Rein turbo oil feed pipes are manufactured with premium ContiTech OE quality hose material designed to withstand the demands of automotive turbo cooling systems. Rein turbo oil feed pipes are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in turbo cooling systems.

Product Features:

• Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
• Designed as direct-fit replacements to ensure trouble-free proper installation.
• Complete with hardware and seals when necessary for installation to save installation time and additional costs.
• Restores your vehicle to safe and optimal performance levels.
• Replacing both feed and return pipes together ensures optimal performance and safety levels.

Valve Keeper

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• 100% TIG-Welded
• Billet Aluminum Factory Style Quick Connect
• 2.5 in. Inlet/3 in. Outlet For Superior Strength and Durability
• Larger Than Factory Intercooler and Tubes

Camshaft Position Sensor

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Redi-Sleeve

The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.

Product Features:

• Thermostat Hose Flange Repair Kit
• Thermostat Hose Flange Repair Kit
• The original coolant junction on certain BMW vehicles fails due to its weak plastic construction. This Dorman OE FIX hose flange kit allows direct replacement with a strengthened aluminum flange and clamp.
• Upgraded replacement – this thermostat hose flange repair kit includes a stronger aluminum flange to prevent future leaks
• Convenient kit – comes with flange, O-ring and clamp for complete repair of failed coolant junction

Valve Stem Seal Kit

Timing Chain

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

• Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Fuel Pump Seal – Mec

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

• Prevents moisture and debris from entering and contaminating the system
• Direct fit
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Produced by an original equipment supplier

WARNING: This item cannot be returned for a replacement or refund if opened! Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:

• High-quality design and engineering for perfect performance
• Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
• Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Mandrel-bent Tubing: Constructed of 2-1/2″ to 3″ mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tubes from engine heat and protects them from corrosion. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style. Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Product Features:

• Outflows Factory Intercooler by 21%
• Lowers Intake Air Temperature
• Incorporates Factory Style Quick Conn. For Intercooler Tubes
• 100% TIG-Welded For Strength And Durability

This turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this turbocharger coolant line is designed to match the fit and function of the original line on specified vehicles
• Ideal solution – this coolant line is a reliable replacement for a leaking or failed original line
• Durable construction – made from quality components to ensure reliable performance and long service life
• Quality assured – backed by a team of product engineers based in the United States

Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:

• Includes all the bolts needed to complete the job.
• Comes with torque specs to make sure each bolt is properly tighten
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Aluminum bolts are torque to yield and must be replaced once they are released.

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce engine vibration and noise Vibration Control Brochure

Oil Level Sender O-R

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

• Produced from spring steel for long-lasting flexibility of beads
• Thermal stability up to 600F
• Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
• Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
• Tightening instructions provided with each gasket for perfect results

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

• Produced from spring steel for long-lasting flexibility of beads
• Thermal stability up to 600F
• Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
• Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
• Tightening instructions provided with each gasket for perfect results