2014 Volkswagen Beetle Exhaust Parts

Essential 2014 Volkswagen Beetle Exhaust Parts

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23710)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$588.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23710. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Volkswagen Jetta, 2001-2005 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE parts 1J0 254 508 G and 1J0 254 509 AX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99235HM)

HM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$261.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99235HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (Part No.49-36407)

MACH Force-Xp Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP

from

$1278.99
aFe is proud to introduce the Dual Cat-Back Exhaust System for the 2012-2013 Volkswagen Beetle with the L4-2.0L Turbo engine. In recent testing this Mach Force XP cat-back exhaust system produced 7 horsepower and 14 lbs. x ft. of torque. This exhaust system is constructed out of mandrel-bent, 2.50 in. 304 stainless steel and includes MIG welded hangers and OE-style band clamps for a simple, leak-free, bolt-on installation. A huge 6 in. round high-flow muffler is used to keep exhaust drone to a minimum while maintaining a sporty sound. aFe utilizes dual 4 in. double wall, polished, stainless steel tips with an aFe laser-etched logo which provides an aggressive yet elegant look. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:
  • 2.5 in. Dia. 304 Stainless Steel
  • 100% Hand MIG Welded
  • 4 in. Polished 304 Stainless Steel Laser Etched Tips
  • Includes A 6 in. High-flow 304 Stainless Steel Polished Muffler
See More

MagnaFlow – Touring Series Cat-Back Performance Exhaust System (Part No.15745)

Touring Series Cat-Back Performance Exhaust System

from

$817.99
The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15745 15745 is the perfect partner for your 1.8L, 2.8L 1999-2005 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips. 15745 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1999-2005 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15745 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:
  • Mandrel bent tubing
  • 409 Stainless Steel Construction
  • Increased Horsepower and Torque
See More

HJS – Exhaust Clamp (Part No.H8020502586HJS)

Exhaust Clamp

from

$32.12
Exhaust Clamp

HJS – Exhaust Clamp (Part No.H8020502576HJS)

Exhaust Clamp

from

$21.06
Exhaust Clamp

Walker – Clamp V-Band Bolt Dia 0.236 Length Nut Type Hex Pipe Dia 1.75 (Part No.35317)

Clamp V-Band Bolt Dia 0.236 Length Nut Type Hex Pipe Dia 1.75

from

$8.49
Complete your exhaust repair with a Walker® V band clamp. Featuring a T-bolt latch design for superior clamping and sealing, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • SUPERIOR SEAL — T-bolt latch design for superior clamping and sealing
  • OE DESIGN — Designed with OE-style features for secure fit
  • THE RIGHT CONNECTION — For use with flared connectors
  • PREMIUM MATERIALS – Made from robust material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25

from

$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dorman – Exhaust Gas Temperature Bung Repair Kit (Part No.904-557)

Exhaust Gas Temperature Bung Repair Kit

from

$30.99
This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
  • Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
  • Application specific – designed for certain Audi and Volkswagen model years
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Exhaust Gas Temperature Bung Repair (Part No.904-528)

Exhaust Gas Temperature Bung Repair

from

$34.99
This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
  • Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
  • Application specific – designed for a wide range of vehicle years, makes and models
  • This part has undergone vehicle try-on testing for conformance to product standards and quality
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 94356)

Exhaust Manifold Gasket Set

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

MAHLE Original – EXHAUST MANIFOLD SET (Part No.MS18396)

EXHAUST MANIFOLD SET

from

$17.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

MAHLE Original – EXH MANIFOLD SET (Part No.MS19638)

EXH MANIFOLD SET

from

$8.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2457)

Exhaust Gas Temperature (EGT) Sensor

from

$121.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Exhaust Gas Temperature Sensor (Part No.904-738)

Exhaust Gas Temperature Sensor

from

$108.99
EGT sensors frequently seize in the exhaust bung, making replacement difficult and damaging the bung. This Dorman OE FIX solution directly replaces the sensor and comes with a bung repair kit just in case.

Product Features:
  • Convenient solution – this replacement EGT sensor comes with a bung repair kit in case the bung is damaged during removal
  • Cost-effective fix – bung repair kit allows direct repair of damaged bung instead of replacing entire exhaust pipe
  • Complete kit – comes with sensor, new bung, weld-on plate and zip tie
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGC2448)

Exhaust Gas Temperature (EGT) Sensor

from

$115.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Febi – Exhaust Hanger Bracket (Part No.H8010499651FEB)

Exhaust Hanger Bracket

from

$24.25
The Febi exhaust brackets are easily installed and durably built. Highly resistant to rust and corrosion, they withstand the harsh environment underneath your vehicle-helping to ensure proper exhaust system performance.

Product Features:
  • Plated or coated for corrosion resistance
  • Direct replacement for a proper fit every time
  • Firmly mounts exhaust pipe underneath the car, helping to prevent pipe detachment, rattling noises, and exhaust failure
  • No special tools needed for replacement
See More

MAHLE Original – Catalytic Converter Gasket (Part No.F32609)

Catalytic Converter Gasket

from

$5.79
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1102)

Exhaust Flange Gasket

from

$19.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-28461-00)

Exhaust Pipe Flange Gasket

from

$11.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Walker – 4 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31649)

4 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials

from

$16.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – 4 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials (Part No.31662)

4 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials

from

$4.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker┬« accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

HJS – Exh. Man. to Pipe Ga (Part No.H4003121297HJS)

Exh. Man. to Pipe Ga

from

$4.63
Exh. Man. to Pipe Ga

Rein – Exhaust Hanger (Part No.EXH0032)

Exhaust Hanger

from

$14.99
Rein exhaust hangers are direct-fit OE replacements designed and manufactured to exact standards. Hangers come complete to ensure proper fit and function.

Product Features:
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Replace damaged or noisy exhaust hangers with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust hangers to prevent damage to costly catalytic converters and other exhaust components.
See More

Vaico – Exhaust Hanger Bracket (Part No.H8010499612VCO)

Exhaust Hanger Bracket

from

$28.73
The Vaico exhaust brackets are easily installed and durably built. Highly resistant to rust and corrosion, they withstand the harsh environment underneath your vehicle-helping to ensure proper exhaust system performance.

Product Features:
  • Plated or coated for corrosion resistance
  • Direct replacement for a proper fit every time
  • Firmly mounts exhaust pipe underneath the car, helping to prevent pipe detachment, rattling noises, and exhaust failure
  • No special tools needed for replacement
See More

BRExhaust – Exhaust Hanger (Part No.255-102)

Exhaust Hanger

from

$10.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Rein – Exhaust Hanger (Part No.EXH0027)

Exhaust Hanger

from

$23.99
Rein exhaust hangers are direct-fit OE replacements designed and manufactured to exact standards. Hangers come complete to ensure proper fit and function.

Product Features:
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Replace damaged or noisy exhaust hangers with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust hangers to prevent damage to costly catalytic converters and other exhaust components.
See More

Febi – Exhaust Hanger (Part No.H8050174446FEB)

Exhaust Hanger

from

$17.95
Exhaust Hanger

2014 Volkswagen Beetle Exhaust Parts

You count on your 2014 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 33 Exhaust Parts ranging in price from $4.49 to $2,017.99, you’re sure to find everything you need for your 2014 Volkswagen Beetle.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 14 different brands like Walker, Magnaflow, and Dorman. 2014 Volkswagen Beetle Exhaust Parts start as low as $4.49!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 2014 Volkswagen Beetle Exhaust Parts.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2014 Volkswagen Beetle below to get started!

Top-Rated Exhaust Parts Brands For Your 2014 Volkswagen Beetle

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Walker, Magnaflow, Dorman, and even more.

Popular Walker Exhaust Parts

You’ll find popular Walker brand products across Exhaust Fittings. All are waiting to get your 2014 Volkswagen Beetle back on the road. Some of the top-rated Walker products in these categories are:

FAQs for 2014 Volkswagen Beetle Exhaust Parts

What are the most purchased Exhaust Parts for the 2014 Volkswagen Beetle?

Out of 33 Exhaust Parts for the 2014 Volkswagen Beetle, the most popular in our inventory are:
4 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
from $4.49
This product is not rated
4 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
OEM Grade Federal / EPA Compliant Universal Catalytic Converter
from $202.99
This product is not rated
OEM Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters
Exhaust Gas Temperature Bung Repair
from $34.99
This product is not rated
Exhaust Gas Temperature Bung Repair
EGT Sensor Bung Repair Kits