2014 Scion xB Steering and Chassis Parts

Essential 2014 Scion xB Steering and Chassis Parts

Terada – Sway Bar Link Bushing (Part No.L1031237928TER)

Sway Bar Link Bushing

from

$3.53
The Terada Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK620269)

Suspension Control Arm and Ball Joint Assembly

from

$168.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Rare Parts – Ball Joint (Part No.RP11476)

Ball Joint

from

$101.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Rare Parts – Tie Rod End (Part No.RP29006)

Tie Rod End

from

$58.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Autopart International Inc – P/S Pressure Hose (Part No.M20152032471API)

P/S Pressure Hose

from

$92.82
P/S Pressure Hose

Dorman – Left Steering Knuckle (Part No.698-051)

Left Steering Knuckle

from

$269.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
  • Reliable fit – precision-engineered to match the dimensions of original components
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

MOOG – Camber Adjusting Kit (Part No.K5330)

Camber Adjusting Kit

from

$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Camber Adjusting Kit (Part No.K90477)

Camber Adjusting Kit

from

$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Ball Joint (Part No.K500062)

Ball Joint

from

$58.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Rare Parts – Sway Bar Bushing (Part No.RP22599)

Sway Bar Bushing

from

$26.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Whiteline – Sway Bar Link Bushing (Part No.W23365)

Sway Bar Link Bushing

from

$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.

Product Features:
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Cardone – Electronic Rack and Pinion {Complete} – Import (Part No.24-2670)

Electronic Rack and Pinion {Complete} - Import

from

$378.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.

Product Features:
  • Protective coating applied to each unit, where applicable, to extend the life of the unit
  • 100% performance testing to ensure perfect fit, function and reliable performance
  • 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
  • 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
  • Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
  • Valve housings, where applicable, have polished micro-finish sleevings for durability
  • Built to meet or exceed O.E.M. performance
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000449289MAV)

Complete Steering Rack, Remanufactured

from

$588.94
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Carquest Premium – R and P Bellow Kit (Part No.250-713093)

R and P Bellow Kit

from

$23.49
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Engineered to protect steering rack from road contamination
  • Hardware included for easier installation (where applicable)
See More

EMPI – Steering Rack Boot K (Part No.M1030362971EMP)

Steering Rack Boot K

from

$18.96
Steering Rack Boot K

MOOG – Alignment Shim (Part No.K6660-1)

Alignment Shim

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Shim (Part No.K100143)

Alignment Shim

from

$23.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Camber Bolt Kit

from

$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:
  • Designed to meet OE Form, Fit, and Function.
  • Performance tested to ensure durability and reduce tire wear.
  • Precision engineered for improved ride and steering response.
  • Hardware included for ease of installation (where applicable)
See More

MOOG – Stabilizer Bar Link (Part No.K750043)

Stabilizer Bar Link

from

$58.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Rare Parts – Sway Bar Link (Part No.RP19706)

Sway Bar Link

from

$66.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Driveworks – Camber Cam Bolt Kit (Part No.DW-K90477)

Camber Cam Bolt Kit

from

$24.49
Driveworks cam bolts easily install in place of the factory lower control arm mounting bolts.

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Driveworks – Camber Bolt Kit (Part No.DW-K5330)

Camber Bolt Kit

from

$29.99
Camber Bolt Kit

Driveworks – Camshaft Seal (Part No.S-223010)

Camshaft Seal

from

$7.99
Product Features:
  • Brand may vary by location
See More

2014 Scion xB Steering and Chassis Parts

You count on your 2014 Scion xB to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 44 Steering and Chassis Parts ranging in price from $7.99 to $588.94, you’re sure to find everything you need for your 2014 Scion xB.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 11 different brands like Imperial, Moog, and Driveworks. 2014 Scion xB Steering and Chassis Parts start as low as $7.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 253 extensive product reviews on 2014 Scion xB Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Camber Adjusting Kit with 5.0 stars and Transmission Oil Cooler Reinstallation Kit with 2.3 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2014 Scion xB below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2014 Scion xB

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Scion xB running right for years to come. In our inventory you’ll find brands like Imperial, Moog, Driveworks, and even more.

Popular Carquest Premium Steering and Chassis Parts

You’ll find popular Carquest Premium brand products across Ball Joints. All are waiting to get your 2014 Scion xB back on the road. Some of the top-rated Carquest Premium products in these categories are:
OE matched design for Form, Fit, and Function
from $40.49
(1)
OE matched design for Form, Fit, and Function
Lower Ball Joints

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2014 Scion xB, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2014 Scion xB Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2014 Scion xB?

Out of 44 Steering and Chassis Parts for the 2014 Scion xB, the most popular in our inventory are:
Stabilizer Bar Link
from $58.99
(14)
Stabilizer Bar Link
Sway Bar Link Kits
Camber Bolt Kit
from $20.29
(10)
Camber Bolt Kit
Front Alignment Kits
Camber Adjusting Kit
from $34.99
(9)
Camber Adjusting Kit
Camber Kits

What are the top-rated 2014 Scion xB Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2014 Scion xB based on customer reviews/ratings are:
Camber Adjusting Kit
from $29.99
(4)
Camber Adjusting Kit
“Fix my alignment problem”
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”
Camber Adjusting Kit
from $48.99
(2)
Camber Adjusting Kit
“Quick wat to adjust camber”