2014 Nissan 370Z Wheels and Tires

Below you will find various in-demand Nissan Wheels and Tires, components and accessories for your 2014 370Z. Advance Auto Parts has popular 370Z parts like Wheel Studs, TPMS Sensors, Wheel Hardwares and more. You’ll also find aftermarket and OEM Wheels and Tires for other 370Z model years including 2011, 2012, 2013, 2015, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 2014 Nissan 370Z Wheels and Tires below and start saving instantly.

Popular 2014 Nissan 370Z Wheels and Tires Categories

Front Wheel Bearings

Tire Pressure Sensors

Remote Tire Pressure Sensors

TPMS Programmable Sensor Service Kits

Rear Wheel Bearings

Wheel Lug Nuts

Locking Wheel Lug Nuts

Wheel Studs

Tire Pressure Sensor Valves

Tire Pressure Sensor Service Kits

Tire Pressure (TPMS) Sensor Component Kits

Essential Wheels and Tires for 2014 Nissan 370Zs

from

$48.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

Installs right out of the box
No sensor programing required
Works with all major TPMS scan tools
No training required – designed to follow existing OE vehicle relearn procedures
Faster TPMS scan tool hunt mode
Reduces SKUs
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$42.99

Professional installation is strongly suggested

Product Features:

The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$81.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$4.26

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

Direct replacement for a proper fit every time
Corrosion resistant
Double-ended studs as well as serrated bolts, and wheel bolts available
Over-length and under-length studs available for convenience and ease of installation

from

$1.99

Parts Kit For Lex/Toy

from

$29.49

Parts Kit For Lexus/Toy

from

$6.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$3.49

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$74.99

WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.

Product Features:

Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
Reinforced seal design material allows for optimal performance in harsh environments.
WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
Brand may vary by location

from

$291.99

Product Features:

Innovative roll form design ensures consistent and optimal preload.
Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
Engineered to overcome problems and deliver smooth, reliable performance.
MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.

from

$13.29

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.49

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.49

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change

from

$11.49

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$8.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
0.453″ rim hole compatiblity
200 PSI maximum cold inflation pressure

from

$144.99

The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For aluminum wheels only.
Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch

from

$154.99

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For aluminum wheels only.
Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks & 1 Key
Clamshell packaging.

from

$6.99

The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There’s often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.

Product Features:

Improved design – direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut.
Corrosion resistant – by removing the veneer of the OEM lug nut design there’s no chance of moisture and rust causing it to bulge and deform
Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$41.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$56.99

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

DIRECT REPLACEMENT: 1 for 1 replacement sensor
QUICK AND EASY: TPMS sensors are ready out of the box
VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability

from

$7321.99

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$164.99

This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:

Complete repair – this assembly includes the wheel hub and application-specific bearing components
Saves time – eliminates work required to remove individual corroded components
Reliable fit – precision-engineered to match the dimensions of original equipment
Trustworthy quality – engineered and tested in the United States

from

$230.99

Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.

from

$215.99

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

Upgrade your 2014 Nissan 370Z with Top-Quality Wheels and Tires

When it comes to maintaining or upgrading your 2014 Nissan 370Z, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Wheels and Tires are key to keeping your 370Z functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Wheels and Tires for the 2014 Nissan 370Z, designed to meet your needs without breaking the bank. From Wheel Stud replacements to TPMS Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Wheels and Tires for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Wheels and Tires for your 2014 Nissan 370Z at great prices. Our Wheels and Tires inventory for this model ranges from just $1.99 to $7,321.99, with an average price of $232.18. Our 51 Wheels and Tires in stock come from 15 trusted brands, so you’re sure to find the right part for your 2014 Nissan 370Z without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Nissan 370Z, we stock popular OEM and aftermarket Wheels and Tires from top names like Dorman, Schrader, Autel, and more. Dorman Wheels and Tires start at just $3.79 and boast an impressive 4 stars average rating from customers. Schrader and Autel also bring quality to the table, with Wheels and Tires available starting at $2.99, and at an average 4 stars rating. With 162 customer reviews and counting, our 2014 Nissan 370Z Wheels and Tires have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Wheels and Tire upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Nissan 370Z is always ready to roll. We’re committed to providing you with everything you need to keep your 370Z in top shape, all in one place. Start shopping confidently below for your 2014 Nissan 370Z!

Best-Selling Wheel Studs for 2014 Nissan 370Zs

Enhance the driving experience in your Nissan with 4 quality Wheel Stud components, starting at $3.79.

show more show less

from

$4.26

Direct replacement for a proper fit every time
Corrosion resistant
Double-ended studs as well as serrated bolts, and wheel bolts available
Over-length and under-length studs available for convenience and ease of installation

from

$3.79

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$81.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$4.26

Dorman, Wheel Stud, M12-1.25

Most Popular 2014 Nissan 370Z TPMS Sensors

Customize your Nissan with 24 TPMS Sensors products like Tire Pressure Sensors, Remote Tire Pressure Sensors, and Tire Pressure Sensor Valves, all priced under $7,321.99.

show more show less

from

$8.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
0.453″ rim hole compatiblity
200 PSI maximum cold inflation pressure

from

$3.49

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change

from

$53.99

Schrader is the Global leader in both OE and Aftermarket TPMS sensors. Schrader has been supplying OE TPMS sensors since 1997, well before TPMS was mandated by the TREAD Act. Schrader supplies OE quality and validated TPMS sensors, service kits and tools to the tire service provider who wants to be at the forefront in TPMS service. Schrader revolutionized TPMS with the markets first programmable sensor in 2008, and has now changed the market again with their single programmable sensor, covering 314.9, 315 and 433 MHz applications. Now, shops of all sizes are able to participate in the profit building benefits of TPMS while stocking only 1 part. Schrader’s programmable sensor is everything you need in a TPMS sensor combined into one easy to program, OE quality sensor that comes with both clamp-in and snap-in stem options.

Product Features:

Schrader replacement sensors are the OE replacement sensor, and are manufactured to OEM specifications
Direct fit replacement TPMS sensor – 315 MHz Nissan
Replaces OE sensors 40700-1AA0B, 40700-1AA0D, 40700-JA00C, 40700-JA01B, 40700-JA02B, 43211-82Z10
Aluminum nut torque – 35 in-lbs (4 Nm)
Valve core torque = 3 – 5 in-lbs (0.4 Nm)
Reference Schrader TPMS application information for fitment
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$56.99

Installs right out of the box
No sensor programing required
Works with all major TPMS scan tools
No training required – designed to follow existing OE vehicle relearn procedures
Faster TPMS scan tool hunt mode
Reduces SKUs
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

Includes 4 Rubber Press-in Valve Stems
Compatible with Autel 1-Sensors
Compatible with Autel 315MHz & 433MHz MX-Sensors
Warranty on Material and Workmanship
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$47.99

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

315 MHz TPMS Universal with rubber valve
Programmable – Only take 3 seconds to configure to specific application
Always up-to-date with the new programming function via the TPMS diagnostic tool
Covers multiple applications with one OE equivalent sensor
Reprogrammable and Copy Clone Capable
Have WAL technology for locating tire positon
Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$41.99

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$47.99

315 MHz TPMS Universal with metal valve
Programmable – Only take 3 seconds to configure to specific application
Always up-to-date with the new programming function via the TPMS diagnostic tool
Covers multiple applications with one OE equivalent sensor
Reprogrammable and Copy Clone Capable
Have WAL technology for locating tire positon
Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

CV-001 Black Metal Press-in Valve for 1-Sensor

from

$5.49

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

Black Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$462.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$7321.99

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$525.99

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$67.99

This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors’ TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it’s replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it’s backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).

Product Features:

Versatile replacement – this dual-frequency programmable TPMS sensor can replace a failed sensor on vehicles with tire pressure monitoring systems that operate on both 315 MHz and 433MHz frequencies
Programming required – easily calibrate this sensor with a Dorman MULTi-FIT II tool (sold separately, part number 974-505) by vehicle specifications or by cloning it to match the sensor it’s replacing
Direct replacement – this sensor is engineered to match the fit and function of original equipment wheels and tires, and many, but not all aftermarket wheels and tires; check fit before installing
Premium quality – communicating proper tire pressure is critical, and this sensor is backed by a brand with more than a century of engineering excellence and quality, with a warranty you can trust

from

$57.99

DIRECT REPLACEMENT: 1 for 1 replacement sensor
QUICK AND EASY: TPMS sensors are ready out of the box
VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$53.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

Metal clamp-in stem.
Works with most major TPMS Scan tools
Reduces SKUs
OE Designed and Validated
Advance anodization of valve stems and hex nuts
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$44.49

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$43.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$42.99

Professional installation is strongly suggested

Product Features:

The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$42.99

315MHz OE Quality TPMS Sensor for Infiniti, Nissan

from

$42.99

Professional installation is strongly suggested

Product Features:

The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$41.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

Chrome Metal Press-in Valve for 1-Sensor

from

$7.99

The CV-003 is a chrome metal press-in valve stem for the 1-Sensor. It comes with a warranty on material and workmanship.

Product Features:

Chrome Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor
Warranty on Material and Workmanship

CV-002 Titan Grey Metal Press-in Valve for 1-Sensor

from

$4.99

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

Titan Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

Top Picks for 2014 Nissan 370Z Wheel Hardware

Upgrade Nissan 370Zs with top-quality Wheel Hardware parts, including 3 OEM and aftermarket selections for your 2014 model.

show more show less

from

$6.99

Improved design – direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut.
Corrosion resistant – by removing the veneer of the OEM lug nut design there’s no chance of moisture and rust causing it to bulge and deform
Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$13.29

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.94

Dorman’s Wheel Nuts are designed and constructed to strict engineering quality standards. All of Dorman’s Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment. Available in multiple styles and finishes, they match the original to blend in with the overall aesthetic design of your car. Chrome upgrade nuts are also available in multiple styles and colors to enhance the look of your wheels.

Product Features:

Wheel nut covers also available
Easy to install
Available in different quantities and packaging options
Chrome wheel nut and lock kits available (where applicable)

In-Demand Wheel Bearings for 2014 Nissan 370Zs

Select from 10 premium Wheel Bearings parts for your 2014 Nissan 370Z, with prices ranging from $74.99 to $318.94.

show more show less

from

$230.99

EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.

from

$74.99

Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
Reinforced seal design material allows for optimal performance in harsh environments.
WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
Brand may vary by location

from

$215.99

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$318.94

Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.

Product Features:

Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
Features an advanced sensor and sensor technology for superb performance.
Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.

from

$196.11

NSK guarantees the high quality of all of their products by repeated, rigorous bench testing, and other checks that take full advantage of their cutting-edge technology, which only the major bearing manufacturers can offer. Double-row angular contact ball bearings with inner and outer mounting flange. NSK Hub unit bearings are designed to meet increasingly strict requirements that demand lighter weight, greater promotion of fuel efficiency, and enhanced module production systems. Double-row angular contact ball bearing with integral inner and outer mounting flange. Easier mounting due to preset preload.

Product Features:

Preset optimum preload with easy mounting process
High rigidity
Easy mounting process NSK offers compact and lightweight hub unit bearings with built-in ABS sensors
Integrated sensor rotor (encoder)
Compact size and lightweight achieved by utilizing active sensor

from

$296.56

SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.

Product Features:

OE sensors assure correct ABS functions
Premium seals, both inboard and outboard, protect the bearing
Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
100% tested to the actual OE specifications per part number for fit, form and function
High quality steel and surface finishes
Proper implementation of heat treatment

from

$292.13

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the hub unit. Each BCA hub assembly is engineered to the OE design and specification for its make and model. Then, each hub goes through rigorous testing to ensure that the part performs to BCA’s exacting standards. Application-Specific, OE-Style ABS Plugs and Sensors to ensure proper connection and performance. Each sensor on BCA hubs is verified with the OE specs to ensure proper functionality of the ABS module on the vehicle. Components Made with Premium Quality Materials to ensure that our customers receive a robust, durable product. These components include forged steel rings, seals, precision cages, rolling elements, grease and hub bolts.

Product Features:

Forged Steel in the inner and outer rings must meet BCA’s stringent steel quality specifications, which optimizes bearing life.

from

$291.99

Product Features:

Innovative roll form design ensures consistent and optimal preload.
Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
Engineered to overcome problems and deliver smooth, reliable performance.
MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.

from

$164.99

This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:

Complete repair – this assembly includes the wheel hub and application-specific bearing components
Saves time – eliminates work required to remove individual corroded components
Reliable fit – precision-engineered to match the dimensions of original equipment
Trustworthy quality – engineered and tested in the United States

from

$154.65

Wheel Hub Assembly

Most Sold 2014 Nissan 370Z TPMS Sensor Kits

Explore our best-selling Nissan parts for the 2014 370Z among 10 OEM and aftermarket options starting from $1.99.

show more show less

from

$5.99

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Diamond Striped Kit for Clamp-in REDI-Sensors and many OE vehicles

from

$3.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Purple Kit for Honda, Lexus, Pontiac, Scion, & Toyota

from

$3.49

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$4.49

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Electroless nickel-plated valve cores
Advanced anodization of valve stems and hex nuts
Includes torque specifications and installation instructions
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$68.99

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$8.49

OE – validated part identical to the dealer
Electroless nickel-plated valve cores
Advanced anodization of valve stems and hex nuts
Includes torque specifications and installation instructions
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$29.49

Parts Kit For Lexus/Toy

from

$6.49

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$2.99

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$1.99

Parts Kit For Lex/Toy

Top-Rated Wheels and Tires Brands For Your 2014 Nissan 370Z

Shop for the best-rated brands offering Wheels and Tires and other products for your 2014 Nissan 370Zs. Below you’ll find some of our best rated Wheels and Tires from Dorman, Schrader, and Autel, and more. Wheels and Tires from these brands that fit a 2014 370Z start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Wheels and Tires don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 2014 Nissan 370Z Wheels and Tires

When it comes to maintaining or upgrading your 2014 Nissan 370Z, using quality Wheels and Tires is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Wheels and Tires, specifically designed for the 2014 Nissan 370Z. With over 9 Dorman brand Wheels and Tires in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.79, with an average price of just $39.94. Plus, with over 10 customer reviews and an average rating of 4 stars, you can trust that our Dorman Wheels and Tires will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$3.79

This product is not rated

M12-1.25 Serrated Wheel Stud – 14.35mm Knurl, 42mm Length (Sold by each)

“”

from
$6.99

This product is not rated

Wheel Lug Nut: M12-1.25 Thread, Conical 60, Dometop, 1.52" Length, Natural (Sold by each)

“”

from
$13.29

This product is not rated

Wheel Lug Nut Lock: M12-1.25 Thread, Conical 60, Bulge, 35 mm Length, Chrome, 4 Pack

“”

Popular Schrader 2014 Nissan 370Z Wheels and Tires

Schrader auto parts is one of the highest quality Wheels and Tire brands in the market. Any 2014 Nissan 370Z owner should feel confident when installing genuine Schrader parts in their vehicle. To ensure the best fit and performance for your 2014 370Z, Advance Auto Parts carries a full inventory of 6 Schrader Wheels and Tires. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Schrader Wheels and Tires range from $2.99 to $57.99, plus, with more than 17 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Wheels and Tires below will deliver on both quality and value.

from
$2.99

This product is not rated

TPMS Sensor Service Kit

“”

from
$57.99

This product is not rated

Direct Fit Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Aluminum Valve, 1 Pc

“”

from
$6.49

This product is not rated

TPMS Sensor Service Kit

“”

FAQs for 2014 Nissan 370Z Wheels and Tires

Which Wheels and Tires are best-sellers for 2014 Nissan 370Zs?

Out of 51 Wheels and Tires that fit 2014 Nissan 370Zs, the following parts are the top sellers:

MX-Sensor 1-Sensor (Rubber) (11784373) – $41.99
M12-1.25 Serrated Wheel Stud – 14.35mm Knurl, 42mm Length (Sold by each) (16140155) – $3.79
Wheel Lug Nut: M12-1.25 Thread, Conical 60, Dometop, 1.52" Length, Natural (Sold by each) (10043918) – $6.99

What’s the price range for 2014 Nissan 370Z Wheels and Tires?

Wheels and Tire prices for the 2014 Nissan 370Z start at $1.99 and go up to $7,321.99 for the most premium parts.

What’s the average price of a Wheels and Tire for a 2014 Nissan 370Z?

The average price for Wheels and Tires for the 2014 Nissan 370Z is $232.18. Keep in mind the variety of part types within our Wheels and Tire category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Wheels and Tires for other Nissan 370Z model years?

Yes, we currently carry Wheels and Tires for 11 model years of Nissan 370Zs between 2009 and 2020. Wheels and Tires are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2013, 2012, and 2011.

What are the cheapest Wheels and Tires for my 2014 Nissan 370Z?

The cheapest 2014 Nissan 370Z Wheels and Tires we carry in stock are:

Parts Kit For Lex/Toy (28200593) – $1.99
TPMS Sensor Service Kit (11300841) – $2.99
TPMS Sensor Service Kit (11150901) – $3.49
TPMS Sensor Service Kit (16970026) – $3.49
TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece (10553390) – $3.49

What are the top-rated Wheels and Tires that fit the 2014 Nissan 370Z?

Out of 162 reviews by customers, our 2014 Nissan 370Z Wheels and Tires have an average customer rating of . These are some of the highest-rated Wheels and Tire types for the 2014 Nissan 370Z and their top-rated products:

TPMS Sensor Kits
- TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (10805372) – $5.99
- TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece (10553390) – $3.49
- TPMS Sensor Service Kit (11150901) – $3.49
Wheel Studs
- TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (10805372) – $5.99
- TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece (10553390) – $3.49
- TPMS Sensor Service Kit (11150901) – $3.49
Wheel Bearings
- TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (10805372) – $5.99
- TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece (10553390) – $3.49
- TPMS Sensor Service Kit (11150901) – $3.49

What types of Wheels and Tires do you sell for my 2014 Nissan 370Z?

As of 2/5/25, these are some of the most in-demand types of Wheels and Tires for a 2014 Nissan 370Z:

Can I get help with 2014 Nissan 370Z Wheels and Tire orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Wheels and Tires and more.

What is your return policy for Nissan 370Z Wheels and Tires?

Advance Auto Parts keeps returns simple. For new Nissan 370Z Wheels and Tires and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Nissan 370Z Wheels and Tires

VDO REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10001HP)

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

Dorman – Wheel Stud: Serrated, M12-1.25 Thread Size, Right Hand Thread, 40 Pack (Part No.610-378.40)

Dorman – Serrated Wheel Stud (Part No.O8060448714DOR)

Xtra Seal – Parts Kit For Lex/Toy (Part No.15-20216)

Xtra Seal – Parts Kit For Lexus/Toy (Part No.17-20216AK)

Schrader – TPMS Sensor Service Kit (Part No.34000)

Schrader – TPMS Sensor Service Kit (Part No.20018)

Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT512379)

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512390)

Dorman – Wheel Lug Nut Lock: M12-1.25 Thread, Conical 60, Bulge, 35 mm Length, Chrome, 4 Pack (Part No.712-415)

Dorman – Wheel Lug Nut Lock Set: M12-1.25 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key (Part No.711-455)

Schrader – TPMS Sensor Service Kit (Part No.20008)

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)

McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.25 Thread Size) (Part No.65554)

McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.25 Thread Size) (Part No.65554CN)

Dorman – Wheel Lug Nut: M12-1.25 Thread, Conical 60, Dometop, 1.52" Length, Natural (Sold by each) (Part No.611-294)

Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)

Schrader – Direct Fit Tire Pressure Sensor (TPMS): Clamp-In Aluminum Valve, 1 Piece (Part No.20064)

Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)

Dorman – Wheel Hub And Bearing Assembly (Part No.951-257)

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513334)

Carquest Premium – Hub Assembly with Wheel Bearing 91-556354 (Part No.91-556354)

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Dorman – Serrated Wheel Stud (Part No.O8060448714DOR)

Dorman – M12-1.25 Serrated Wheel Stud – 14.35mm Knurl, 42mm Length (Sold by each) (Part No.610-378)

Dorman – Wheel Stud: Serrated, M12-1.25 Thread Size, Right Hand Thread, 40 Pack (Part No.610-378.40)

Dorman – Dorman, Wheel Stud, M12-1.25 (Part No.O8060169748DOR)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)

Schrader – TPMS Sensor Service Kit (Part No.20008)

Schrader – Direct Fit Tire Pressure Sensor (TPMS): Clamp-In Aluminum Valve, 1 Piece (Part No.28204)

REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10003A)

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3041)

Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3040)

Autel – CV-001 Black Metal Press-in Valve for 1-Sensor (Part No.CV-001)

Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)

Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)

Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)

Dorman – Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor (Part No.974-304)

Schrader – Direct Fit Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Aluminum Valve, 1 Pc (Part No.29166)

REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 315 MHz — 1 Sensor (Part No.SE10007)

Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)

Autel – Adjustable Angle Programmable Universal TPMS Sensor Metal – 315MHz and 433MHz (Part No.300030)

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

Huf North America – 315MHz OE Quality TPMS Sensor for Infiniti, Nissan (Part No.RDE059V21)

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)

Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)

Autel – Chrome Metal Press-in Valve for 1-Sensor (Part No.CV-003)

Autel – CV-002 Titan Grey Metal Press-in Valve for 1-Sensor (Part No.CV-002)

Dorman – Wheel Lug Nut: M12-1.25 Thread, Conical 60, Dometop, 1.52" Length, Natural (Sold by each) (Part No.611-294)

Dorman – Wheel Lug Nut Lock: M12-1.25 Thread, Conical 60, Bulge, 35 mm Length, Chrome, 4 Pack (Part No.712-415)

Dorman – Wheel Lug Nut (Part No.O8030682071DOR)

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513334)

Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT512379)

Carquest Premium – Hub Assembly with Wheel Bearing 91-556354 (Part No.91-556354)

Timken – Wheel Hub Assembly (Part No.K7001461006TIM)

NSK – Wheel Hub Assembly (Part No.K7001461006NSK)

SKF – WHEEL HUB ASSEMBLY (Part No.K7001461006SKF)

NTN – BCA Wheel Hub Assembly (Part No.K7001450212NTN)

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512390)

Dorman – Wheel Hub And Bearing Assembly (Part No.951-257)

Autopart International Inc – Wheel Hub Assembly (Part No.K70011961142API)

Dill Air Control – TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (Part No.7020K)

Dill Air Control – TPMS Service Kit: Purple Color Coded Service Kit For Select Models, 25 Piece (Part No.1100K)

Schrader – TPMS Sensor Service Kit (Part No.20018)

REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

REDI-Sensor – TPMS Service Kit (Part No.SE54191)

Xtra Seal – Parts Kit For Lexus/Toy (Part No.17-20216AK)

Schrader – TPMS Sensor Service Kit (Part No.34000)

Schrader – TPMS Sensor Service Kit (Part No.20014)

Xtra Seal – Parts Kit For Lex/Toy (Part No.15-20216)