2014 Mazda 3 Power Steering Parts

Essential 2014 Mazda 3 Power Steering Parts

Maval – Complete Steering Rack, Remanufactured (Part No.M1000422441MAV)

Complete Steering Rack, Remanufactured

from

$582.35
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000398696MAV)

Complete Steering Rack, Remanufactured

from

$566.23
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
  • Installation Notes: Steering system must be completely flushed before installing a new steering rack. Please refer to the vehicles steering fluid requirements (usually located in the engine compartment) before flushing or replacing the power steering flui
See More

Cardone – Rack and Pinion Assembly (Part No.26-2043)

Rack and Pinion Assembly

from

$312.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Rack and Pinion Assembly (Part No.1G-2009)

Rack and Pinion Assembly

from

$214.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Electronic Rack & Pinion (Complete) – Import (Part No.24-2008)

Electronic Rack & Pinion (Complete) - Import

from

$177.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.

Product Features:
  • Protective coating applied to each unit, where applicable, to extend the life of the unit
  • 100% performance testing to ensure perfect fit, function and reliable performance
  • 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
  • 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
  • Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
  • Valve housings, where applicable, have polished micro-finish sleevings for durability
  • Built to meet or exceed O.E.M. performance
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)

Transmission Oil Cooler Replacement Hose

from

$14.49
Covered in black Hypalon
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Carquest Premium – Pressure Line Hose Assembly (Part No.37890)

Pressure Line Hose Assembly

from

$102.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Carquest Premium – Pressure Hose Assembly (Part No.37889)

Pressure Hose Assembly

from

$93.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
See More

Carquest Premium – Pressure Hose Assembly (Part No.37240)

Pressure Hose Assembly

from

$127.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

EMPI – re Steering Rack Boot (Part No.M10101317635EMP)

re Steering Rack Boot

from

$16.11
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Rare Parts – R & P BELLOWS (Part No.RP57359)

R & P BELLOWS

from

$14.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

2014 Mazda 3 Power Steering Parts

Maybe you’re in the middle of a full rebuild of that 2014 Mazda 3. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 9 different Power Steering Parts in our inventory ranging from $11.49 to $214.99. That means you can find the exact parts or products you need to keep that 2014 Mazda 3 running smoothly.

Power Steering Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Mazda 3. Imperial, Edelmann, and Factory Air are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Power Steering Parts for your 2014 Mazda 3, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,254 reviews in this category, some of the top rated parts include Transmission Oil Cooler Replacement Hose with 3.0 stars.

So if you’re in the market for aftermarket Power Steering Parts to keep your 2014 Mazda 3 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Power Steering Parts Brands To Make Your 2014 Mazda 3 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Mazda 3 demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 3 the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.

Popular Imperial Power Steering Parts

We carry Imperial parts in our stock across Power Steering Coolers and Power Steering Pressure Hoses categories, plus more. For a 2014 Mazda 3, our most popular Imperial Power Steering Parts include:
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers

Top 2014 Mazda 3 Power Steering Parts from Imperial

Imperial products are another trusted brand when it comes to Power Steering Parts for your 2014 Mazda 3. Popular Imperial parts include:
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
Power Steering Coolers

FAQs for 2014 Mazda 3 Power Steering Parts

What are the most purchased Power Steering Parts for the 2014 Mazda 3?

Out of 9 Power Steering Parts for the 2014 Mazda 3, the most popular in our inventory are:
Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles
from $31.49
This product is not rated
Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles
Power Steering Filters
Rack and Pinion Assembly
from $214.99
This product is not rated
Rack and Pinion Assembly
Rack & Pinions
Electronic Rack & Pinion (Complete) - Import
from $177.99
This product is not rated
Electronic Rack & Pinion (Complete) – Import
Rack & Pinions

What are the top-rated 2014 Mazda 3 Power Steering Parts?

Top-rated Power Steering Parts for your 2014 Mazda 3 based on customer reviews/ratings are:
Transmission Oil Cooler Replacement Hose
from $14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses. 11/32″ is an odd size hose. Th”