2014 Lexus RX350 Steering and Chassis Parts

Essential Steering and Chassis Parts for 2014 Lexus RX350s

Carquest Premium – STABILIZER BAR LINK (Part No.510-423860)

STABILIZER BAR LINK

from

$22.49
STABILIZER BAR LINK

Rare Parts – Sway Bar Link (Part No.RP19912)

Sway Bar Link

from

$67.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

CTR – Sway Bar Link (Part No.L1030140415CTR)

Sway Bar Link

from

$40.99
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

CTR – Sway Bar Link (Part No.L1030140506CTR)

Sway Bar Link

from

$53.60
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK622944)

Control Arm and Ball Joint Assembly

from

$117.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
  • GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
  • HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
See More

Dorman – Suspension Control Arm (Part No.524-087)

Suspension Control Arm

from

$114.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Cardone New – New Rack and Pinion Assembly (Part No.97-2617)

New Rack and Pinion Assembly

from

$507.99
CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:
  • Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
  • Performance testing ensures perfect fit, function and reliable performance.
  • Computerized spool valve balancing ensures exceptional steering feel.
  • Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
  • Built to meet or exceed O.E.M. performance.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2617)

Remanufactured Rack and Pinion Assembly

from

$598.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

MOOG – Ball Joint (Part No.K90347)

Ball Joint

from

$50.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

MOOG – Ball Joint (Part No.K500187)

Ball Joint

from

$119.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010283170SNK)

Sankei 555 Tie Rod End

from

$60.96
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K200617)

Stabilizer Bar Bushing Kit

from

$16.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

TRW – Sway Bar Bushing Kit (Part No.L1049452503TRW)

Sway Bar Bushing Kit

from

$15.15
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
  • Extensive on-road testing at TRW tracks around the world
See More

Dorman – Right Steering Knuckle (Part No.698-163)

Right Steering Knuckle

from

$322.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Left Steering Knuckle (Part No.698-191)

Left Steering Knuckle

from

$438.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – R & P BELLOWS (Part No.RP57361)

R & P BELLOWS

from

$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3069)

Steering Rack Boot Kit

from

$20.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Driveworks – Control Arm Cam Bolt Kit (Part No.DW-K90208)

Control Arm Cam Bolt Kit

from

$21.79
Driveworks Brand Control Arm Cam Bolt Kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response.

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Driveworks – Camber Cam Bolt Kit (Part No.DW-K90477)

Camber Cam Bolt Kit

from

$24.49
Driveworks cam bolts easily install in place of the factory lower control arm mounting bolts.

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

MOOG – Tie Rod End (Part No.ES800533)

Tie Rod End

from

$71.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End (Part No.ES80944)

Tie Rod End

from

$58.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Camber Adjusting Kit (Part No.K929)

Camber Adjusting Kit

from

$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Camber Adjusting Kit (Part No.K90475)

Camber Adjusting Kit

from

$27.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Camber Adjusting Kit (Part No.K90208)

Camber Adjusting Kit

from

$29.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Beck/Arnley – Ball Joint Front Lower (Part No.101-4884)

Ball Joint Front Lower

from

$58.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Necessary hardware supplied as needed for a complete installation
  • Hardware functionality matches original design requirements
  • Application specific for this vehicle
See More

Sankei 555 – Ball Joint (Part No.L20201453818SNK)

Ball Joint

from

$70.01
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Rare Parts – Ball Joint (Part No.RP12266)

Ball Joint

from

$136.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Upgrade your 2014 Lexus RX350 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2014 Lexus RX350, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lexus or enhancing its overall performance, Steering and Chassis Parts are key to keeping your RX350 functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Steering and Chassis Parts for the 2014 Lexus RX350, designed to meet your needs without breaking the bank. From Alignment Hardware replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2014 Lexus RX350 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $14.99 to $455.99, with an average price of $88.58. Our 52 Steering and Chassis Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 2014 Lexus RX350 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Lexus RX350, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Driveworks Moog, and more. Driveworks Steering and Chassis Parts start at just $24.49 and boast an impressive 4 stars average rating from customers. With 156 customer reviews and counting, our 2014 Lexus RX350 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Lexus RX350 is always ready to roll. We’re committed to providing you with everything you need to keep your RX350 in top shape, all in one place. Start shopping confidently below for your 2014 Lexus RX350!

Best-Selling Alignment Hardware for 2014 Lexus RX350s

Enhance the driving experience in your Lexus with 1 quality Alignment Hardware components, starting at $434.99.

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Most Popular 2014 Lexus RX350 Sway Bars

Customize your Lexus with 17 Sway Bars products like Sway Bar Link Kits, Sway Bar Link Bushing Kits, and Sway Bar Bushings, all priced under $63.02.

MOOG – Stabilizer Bar Bushing Kit (Part No.K200616)

Stabilizer Bar Bushing Kit

from

$38.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Driveworks – Sway Bar Link Kits (Part No.DW-K90344)

Sway Bar Link Kits

from

$39.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot with grease relief valve keeps contaminants out
  • Performance tested to ensure durability
See More

MOOG – Stabilizer Bar Link (Part No.K90344)

Stabilizer Bar Link

from

$56.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Carquest Premium – Stabilizer Bar Link (Part No.644-65972)

Stabilizer Bar Link

from

$49.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

ACDelco – Advantage Suspension Stabilizer Bar Link (Part No.L1030627018ACD)

Advantage Suspension Stabilizer Bar Link

from

$63.02
ACDelco Advantage Suspension Stabilizer Bar Links connect the ends of your vehicle’s stabilizer bar near the wheels, and allow the bar to function in controlling body roll. These replacement components contain a forged CNC-machined shell, compressed bushing material, case-hardened studs, and constant-torque pivot joints for high-quality performance, strength, and durability. ACDelco Advantage Suspension Stabilizer Bar Links offer quality at an economical price.

Product Features:
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability
  • Coated for corrosion resistance and long life
  • Greasable design where applicable, for easy maintenance and longevity
  • Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
  • Forged CNC-machined shell provides high-quality, precision-made performance and additional strength
  • Case-hardened studs with rolled threads for strength and cleanliness
  • Heat-treated forging for enhanced part quality and durability
See More

MOOG – Stabilizer Bar Link (Part No.K750419)

Stabilizer Bar Link

from

$43.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Stabilizer Bar Link (Part No.K750418)

Stabilizer Bar Link

from

$43.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

AST – Polyurethane Sway Bar Bushing (Part No.L1050846895AST)

Polyurethane Sway Bar Bushing

from

$19.09
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

CTR – Sway Bar Link (Part No.L1030140415CTR)

Sway Bar Link

from

$40.99
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rare Parts – Sway Bar Frame Bushing (Part No.RP22336)

Sway Bar Frame Bushing

from

$42.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Link (Part No.RP19911)

Sway Bar Link

from

$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Link (Part No.RP19910)

Sway Bar Link

from

$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Sankei 555 – Sway Bar Link (Part No.L10303061314SNK)

Sway Bar Link

from

$49.85
Sway Bar Link

TRW – Sway Bar Bushing Kit (Part No.L1049947743TRW)

Sway Bar Bushing Kit

from

$38.40
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Carquest Premium – STABILIZER BAR LINK (Part No.510-423860)

STABILIZER BAR LINK

from

$22.49
STABILIZER BAR LINK

Carquest Premium – STABILIZER BAR LINK (Part No.510-423854)

STABILIZER BAR LINK

from

$20.99
STABILIZER BAR LINK

Delphi – Sway Bar Bushing (Part No.L1050951607DEL)

Sway Bar Bushing

from

$20.30
Sway Bar Bushing

Top Picks for 2014 Lexus RX350 Power Steering Parts

Upgrade Lexus RX350s with top-quality Power Steering Parts parts, including 6 OEM and aftermarket selections for your 2014 model.

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3069)

Steering Rack Boot Kit

from

$20.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3068)

Steering Rack Boot Kit

from

$17.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Rare Parts – R & P BELLOWS (Part No.RP57361)

R & P BELLOWS

from

$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2702)

Remanufactured Rack and Pinion Assembly

from

$455.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

EMPI – re Steering Rack Boot (Part No.M1010849055EMP)

re Steering Rack Boot

from

$18.41
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Dorman – RACK BELLOW (Part No.541-531)

RACK BELLOW

from

$14.99
RACK BELLOW

In-Demand Tie Rods for 2014 Lexus RX350s

Select from 10 premium Tie Rods parts for your 2014 Lexus RX350, with prices ranging from $17.99 to $117.25.

MOOG – Tie Rod End (Part No.ES800533)

Tie Rod End

from

$71.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End (Part No.ES800534)

Tie Rod End

from

$68.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010283170SNK)

Sankei 555 Tie Rod End

from

$60.96
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010283171SNK)

Sankei 555 Tie Rod End

from

$61.51
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Worldpac – TIE ROD END (Part No.M30104193675DEL)

TIE ROD END

from

$117.25
TIE ROD END

Worldpac – TIE ROD END (Part No.M30104193677DEL)

TIE ROD END

from

$108.45
TIE ROD END

Rare Parts – Tie Rod End (Part No.RP29078)

Tie Rod End

from

$81.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Rare Parts – Tie Rod End (Part No.RP29079)

Tie Rod End

from

$80.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Carquest Premium – Tie Rod End (Part No.310-287882)

Tie Rod End

from

$17.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – Tie Rod End (Part No.310-287883)

Tie Rod End

from

$17.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Most Sold 2014 Lexus RX350 Ball Joints

Explore our best-selling Lexus parts for the 2014 RX350 among 13 OEM and aftermarket options starting from $80.99.

MOOG – Ball Joint (Part No.K500188)

Ball Joint

from

$114.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Rare Parts – Ball Joint (Part No.RP12266)

Ball Joint

from

$136.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

MOOG – Ball Joint (Part No.K500187)

Ball Joint

from

$119.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK622944)

Control Arm and Ball Joint Assembly

from

$117.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
  • GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
  • HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK622945)

Control Arm and Ball Joint Assembly

from

$152.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
  • GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
  • HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
See More

Dorman – Suspension Control Arm (Part No.524-087)

Suspension Control Arm

from

$114.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.524-088)

Suspension Control Arm

from

$114.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Sankei 555 – Ball Joint (Part No.L2020321897SNK)

Ball Joint

from

$97.27
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Sankei 555 – Ball Joint (Part No.L2020321896SNK)

Ball Joint

from

$97.46
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Carquest Premium – Control Arm with Ball Joint (Part No.810-690361B)

Control Arm with Ball Joint

from

$129.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:
  • Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
  • Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
  • Pre-installed ball joints and bushings (when applicable) for easy installation
  • Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
  • Hardware included for easier installation
See More

Carquest Premium – Control Arm with Ball Joint (Part No.810-690362B)

Control Arm with Ball Joint

from

$129.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:
  • Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
  • Pre-installed ball joints and bushings (when applicable) for easy installation
  • Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
  • Hardware included for easier installation
See More

Rare Parts – Ball Joint (Part No.RP12265)

Ball Joint

from

$126.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Rare Parts – Ball Joint (Part No.RP12896)

Ball Joint

from

$80.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Top-Rated Steering and Chassis Parts Brands For Your 2014 Lexus RX350

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2014 Lexus RX350s. Below you’ll find some of our best rated Steering and Chassis Parts from Driveworks and Moog, and more. Steering and Chassis Parts from these brands that fit a 2014 RX350 start at just $24.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 2014 Lexus RX350 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2014 Lexus RX350, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Steering and Chassis Parts, specifically designed for the 2014 Lexus RX350. With over 3 Driveworks brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.49, with an average price of just $31.32. Plus, with over 46 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Sway Bar Link Kits
from
$39.99

(45)

Sway Bar Link Kits

“Excellent”

Camber Cam Bolt Kit
from
$24.49

(1)

Camber Cam Bolt Kit

“worked great”

Camber Bolt Kit
from
$29.49
This product is not rated

Camber Bolt Kit

“”

Popular Moog 2014 Lexus RX350 Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2014 Lexus RX350 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2014 RX350, Advance Auto Parts carries a full inventory of 13 Moog Steering and Chassis Parts. Plus you will be keeping your Lexus in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $29.99 to $434.99, plus, with more than 27 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Tie Rod End
from
$71.99
This product is not rated

Tie Rod End

“”

Control Arm and Ball Joint Assembly
from
$152.99
This product is not rated

Control Arm and Ball Joint Assembly

“”

Control Arm and Ball Joint Assembly
from
$117.99
This product is not rated

Control Arm and Ball Joint Assembly

“”

FAQs for 2014 Lexus RX350 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2014 Lexus RX350s?

Out of 52 Steering and Chassis Parts that fit 2014 Lexus RX350s, the following parts are the top sellers:

What’s the price range for 2014 Lexus RX350 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2014 Lexus RX350 start at $14.99 and go up to $455.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2014 Lexus RX350?

The average price for Steering and Chassis Parts for the 2014 Lexus RX350 is $88.58. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Lexus RX350 model years?

Yes, we currently carry Steering and Chassis Parts for 16 model years of Lexus RX350s between 2007 and 2023. Steering and Chassis Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2013.

What are the cheapest Steering and Chassis Parts for my 2014 Lexus RX350?

The cheapest 2014 Lexus RX350 Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 2014 Lexus RX350?

Out of 156 reviews by customers, our 2014 Lexus RX350 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2014 Lexus RX350 and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 2014 Lexus RX350?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2014 Lexus RX350:

Can I get help with 2014 Lexus RX350 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lexus Steering and Chassis Parts and more.

What is your return policy for Lexus RX350 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Lexus RX350 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.