2014 Jeep Wrangler Performance Exhaust Products

Essential 2014 Jeep Wrangler Performance Exhaust Products

Omix – Muffler And Tailpipe Kit (Part No.17611.01)

Muffler And Tailpipe Kit

from

$275.99
Are you smelling exhaust in your Jeep? Is your exhaust system rusty or missing? If so, Omix-ADA offers high quality replacement mufflers and exhaust pipes to solve the problem and get you back on the road.

Product Features:
  • Aluminized Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942447)

Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942442)

40 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Dynomax – Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval (Part No.53804)

Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval

from

$182.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fibe

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Dyno proven to flow up to 700 SCFM
  • Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
  • 1.75-inch to 3-inch inlet / outlet configurations
See More

Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.52556)

50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound

from

$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.952462)

60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$185.99
The 60 series incorporates Flowmaster’s patented Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17289)

Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval

from

$204.99
DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • Stainless steel construction for lifelong protection
  • Polished finish for a show quality shine
  • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39456)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Welded Muffler: Stainless Steel

from

$397.99
Give your Jeep Wrangler JK’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • COMPATIBILITY — Designed for 2007-2011 Jeep Wrangler JK; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
  • NOTES — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
See More

Flowmaster Inc. – Cat-back System 409S – Single Rear Exit – Force II – Mild Sound (Part No.817514)

Cat-back System 409S - Single Rear Exit - Force II - Mild Sound

from

$760.99
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. Force II systems deliver a moderate exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

Product Features:
  • Mandrel bent 16 gauge 409 stainless tubing
  • Stock to mild exterior exhaust tone
  • Includes hangers and hardware for easy installation
  • Connects after factory catalytic converter
  • Dyno tuned for maximum performance
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39517)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Welded Muffler: Stainless Steel

from

$388.99
Give your Jeep Wrangler JK’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:
  • COMPATIBILITY — Designed for 2012-2018 Jeep Wrangler JK; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
  • ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
  • NOTES — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Polished Muffler: Stainless Steel (Part No.39522)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Polished Muffler: Stainless Steel

from

$296.99
Give your 2012-2018 Jeep Wrangler JK exhaust system an upgrade with a DynoMax single cat-back exhaust system. Comes with a DynoMax Ultra Flo SS polished muffler that features stainless-steel construction that delivers lasting protection and show-quality shine.

Product Features:
  • COMPATIBILITY — Designed for 2012-2018 Jeep Wrangler JK 3.6L V6 equipped
  • PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
  • PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo« SS polished muffler, intermediate pipe, tail pipe, bracket and all necessary clamps
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo® SS polished muffler, intermediate pipe, tail pipe, bracket and all necessary clamps
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • SUPERIOR PERFORMANCE — Straight-through muffler design ensures unrestricted exhaust flow and reduces back pressure
  • SPECS ¿ 2.5-in. Outlet single wall, turned down spout
  • SPECS ┐ 2.5-in. Outlet single wall, turned down spout
  • NOTES — For off-road use only; exhaust exits before rear axle
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Polished Muffler: Stainless Steel (Part No.39523)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Polished Muffler: Stainless Steel

from

$482.99
Give your 2012-2018 Jeep Wrangler JK exhaust system an upgrade with the original stainless-steel RockCrawler cat-back system from DynoMax. Comes with a DynoMax Ultra Flo SS polished muffler that features stainless-steel construction that delivers lasting protection and show-quality shine.

Product Features:
  • COMPATIBILITY — Designed for 2012-2018 four-door Jeep Wrangler JK 3.6L V6
  • PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
  • PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo« SS polished muffler, intermediate pipe, tail pipe, tip with band clamp and all necessary clamps
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo® SS polished muffler, intermediate pipe, tail pipe, tip with band clamp and all necessary clamps
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • SUPERIOR PERFORMANCE — Straight-through muffler design ensures unrestricted exhaust flow and reduces back pressure
  • SPECS — 3-in. Outlet, single wall, buffed and polished stainless-steel slant cut tip
  • NOTES — Tail pipe exits in rear
See More

Dynomax – Single – 2.25in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17463)

Single - 2.25in Cat-Back Exhaust System - Super Turbo Muffler: Aluminized Steel

from

$189.99
Give your Jeep Cherokee XJ or Jeep Wagoneer exhaust system an upgrade with a DynoMax Super Turbo single 2.25-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.

Product Features:
  • COMPATIBILITY — Designed for 1986-1992 Jeep Cherokee and 1986-1990 Jeep Wagoneer; see product information for compatibility and engine specs
  • COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipe, adapter and clamps
  • EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
  • EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
  • IMPROVED FLOW CAPACITY — Aluminized steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 415 SCFM
  • PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
  • ENGINEERED TO LAST¿–¿Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
  • ENGINEERED TO LAST┐–┐Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
  • SPECS — 2.25-in. straight cut oval tail pipe
See More

Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Polished Muffler: Stainless Steel (Part No.39516)

Single - 2.5in Cat-Back Exhaust System - Ultra Flo Polished Muffler: Stainless Steel

from

$296.99
Give your 2007-2011 Jeep Wrangler JK exhaust system an upgrade with a DynoMax single cat-back exhaust system. Comes with a DynoMax Ultra Flo SS polished muffler that features stainless-steel construction that delivers lasting protection and show-quality shine.

Product Features:
  • COMPATIBILITY — Designed for 2007-2011 Jeep Wrangler JK 3.8L V6
  • PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this high clearance off-road RockCrawler design kit that can give a 12HP and 11-Lb. Ft. torque improvement
  • PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this high clearance off-road RockCrawler design kit that can give a 12HP and 11-Lb. Ft. torque improvement
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo« SS polished muffler, intermediate pipe, tail pipe, mounting bracket and all necessary clamps
  • COMPLETE SOLUTION — Includes DynoMax Ultra Flo® SS polished muffler, intermediate pipe, tail pipe, mounting bracket and all necessary clamps
  • IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • SUPERIOR PERFORMANCE — Straight-through muffler design ensures unrestricted exhaust flow and reduces back pressure
  • SPECS — 2.5-in. Outlet single wall, turned down spout
  • NOTES — For off-road use only; exhaust exits before rear axle
See More

Omix – Exhaust Pipe (Part No.17613.09)

Exhaust Pipe

from

$172.99
Is your Jeep’s exhaust pipe bent or rusted out? Trying to pass your annual state Inspection or restore your Jeep back to stock? Omix-ADA offers high quality exhaust pipes, gaskets, and hangers to keep you on the road and trail.

Product Features:
  • Aluminized Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dynomax – Exhaust Intermediate Pipe (Part No.54522)

Exhaust Intermediate Pipe

from

$88.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – INTERMEDIATE PIPE (Part No.52355)

INTERMEDIATE PIPE

from

$99.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – TAIL PIPE (Part No.56157)

TAIL PIPE

from

$195.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Exhaust Tail Pipe (Part No.44171)

Exhaust Tail Pipe

from

$70.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

2014 Jeep Wrangler Performance Exhaust Products

Maybe you’re in the middle of a full rebuild of that 2014 Jeep Wrangler. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 11 different Performance Exhaust Products in our inventory ranging from $88.99 to $760.99. That means you can find the exact parts or products you need to keep that 2014 Jeep Wrangler running smoothly.

Performance Exhaust Products are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Jeep Wrangler. Dynomax and Flowmaster Inc. are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Exhaust Products for your 2014 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Exhaust Products to keep your 2014 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Exhaust Products Brands To Make Your 2014 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.

FAQs for 2014 Jeep Wrangler Performance Exhaust Products

What are the most purchased Performance Exhaust Products for the 2014 Jeep Wrangler?

Out of 11 Performance Exhaust Products for the 2014 Jeep Wrangler, the most popular in our inventory are:
Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval
from $182.99
This product is not rated
Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval
Performance Exhaust Mufflers
Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval
from $91.99
This product is not rated
Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval
Performance Exhaust Mufflers
Dual - 2.5in Axle-Back Exhaust System - Super Turbo Muffler: Stainless Steel
from $282.99
This product is not rated
Dual – 2.5in Axle-Back Exhaust System – Super Turbo Muffler: Stainless Steel
Performance Exhaust System Kits