2014 Jaguar XFR Cooling and Climate Controls

Essential Cooling and Climate Controls for 2014 Jaguar XFRs

Nissens – A/C Condenser (Part No.R1030269211NSS)

A/C Condenser

from

$268.07
Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.
See More

Autopart International Inc – A/C Compressor (Part No.R10003199162API)

A/C Compressor

from

$450.69
A/C Compressor

Autopart International Inc – Blower Motor (Part No.R20312074107API)

Blower Motor

from

$123.54
Blower Motor

Motorad – Integrated Thermostat Housing: 192 Degrees (Part No.766-192)

Integrated Thermostat Housing: 192 Degrees

from

$56.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

APA/URO Parts – Thermostat Assembly (Part No.G4002408485APA)

Thermostat Assembly

from

$79.88
Thermostat Assembly

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713261)

A/C Condenser and Receiver Drier Assembly

from

$308.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2346)

ABS Wheel Speed Sensor

from

$348.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

DENSO – First Time Fit A/C Expansion Valve (Part No.R1045922793ND)

First Time Fit A/C Expansion Valve

from

$51.44
Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:
  • OEM Quality and Direct fit Application
  • Designed to the exact OEM specifications
See More

Eurospare – Water Pipe (Part No.G2025463013ESP)

Water Pipe

from

$31.15
Water Pipe

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Dorman – BMR (Part No.973-255)

BMR

from

$156.99
Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54822)

A/C Plate and Fin Evaporator

from

$114.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Cabin Air Temperature Sensor (Part No.WTC2089)

Cabin Air Temperature Sensor

from

$72.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Rein – Expansion Tank (Part No.EPT0198)

Expansion Tank

from

$89.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Includes the sensor that comes with the tank
See More

Dorman – Pressurized Coolant Reservoir: White; Black, Plastic, Original Equipment Replacement (Part No.603-664)

Pressurized Coolant Reservoir: White; Black, Plastic, Original Equipment Replacement

from

$145.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
  • Ideal solution – engineered for a seamless installation.
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0159)

Engine Coolant Temperature Sensor

from

$57.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1058)

Coolant Temperature Sensor

from

$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)

A/C Desiccant Bag Kit

from

$38.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

KAI – A/C Receiver Drier / Desiccant Element (Part No.ARD010150)

A/C Receiver Drier / Desiccant Element

from

$3.99
New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Behr – Radiator (Part No.G1000655306BEH)

Radiator

from

$657.65
Radiator

Geba – Water Pump (Part No.G3000939228GEB)

Water Pump

from

$199.00
Water Pump

Upgrade your 2014 Jaguar XFR with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2014 Jaguar XFR, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jaguar or enhancing its overall performance, Cooling and Climate Controls are key to keeping your XFR functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Cooling and Climate Controls for the 2014 Jaguar XFR, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to HVAC Electrical Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2014 Jaguar XFR at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $3.37 to $818.93, with an average price of $154.51. Our 36 Cooling and Climate Controls in stock come from 17 trusted brands, so you’re sure to find the right part for your 2014 Jaguar XFR without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Jaguar XFR, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. With 344 customer reviews and counting, our 2014 Jaguar XFR Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Jaguar XFR is always ready to roll. We’re committed to providing you with everything you need to keep your XFR in top shape, all in one place. Start shopping confidently below for your 2014 Jaguar XFR!

Best-Selling Engine Cooling Parts for 2014 Jaguar XFRs

Enhance the driving experience in your Jaguar with 17 quality Engine Cooling Part components, starting at $3.37.

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1058)

Coolant Temperature Sensor

from

$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Motorad – Integrated Thermostat Housing: 192 Degrees (Part No.766-192)

Integrated Thermostat Housing: 192 Degrees

from

$56.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0159)

Engine Coolant Temperature Sensor

from

$57.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

APA/URO Parts – Thermostat Assembly (Part No.G4002408485APA)

Thermostat Assembly

from

$79.88
Thermostat Assembly

Eurospare – Water Pipe (Part No.G2025463013ESP)

Water Pipe

from

$31.15
Water Pipe

Eurospare – Water Pump Gasket (Part No.G3040468437ESP)

Water Pump Gasket

from

$29.57
Water Pump Gasket

Geba – Water Pump (Part No.G3000939228GEB)

Water Pump

from

$199.00
Water Pump

Rein – Expansion Tank (Part No.EPT0198)

Expansion Tank

from

$89.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Includes the sensor that comes with the tank
See More

Behr – Radiator (Part No.G1000655306BEH)

Radiator

from

$657.65
Radiator

Worldpac – COOLANT OUTLET FLANG (Part No.G10552743724OEA)

COOLANT OUTLET FLANG

from

$168.13
COOLANT OUTLET FLANG

Dorman – Thermostat Assembly: Includes Bolts, Housing, and Thermostat, 192 Degrees (Part No.902-5169)

Thermostat Assembly: Includes Bolts, Housing, and Thermostat, 192 Degrees

from

$52.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

MTC – Water Pipe O-Ring (Part No.G2026378951MTC)

Water Pipe O-Ring

from

$10.57
Water Pipe O-Ring

MTC – Water Pump O-Ring (Part No.G3059378882MTC)

Water Pump O-Ring

from

$4.69
Water Pump O-Ring

MTC – Water Outlet O-Ring (Part No.G3046378660MTC)

Water Outlet O-Ring

from

$3.37
Water Outlet O-Ring

Most Popular 2014 Jaguar XFR HVAC Electrical Parts

Customize your Jaguar with 1 HVAC Electrical Parts products like Cabin Air Temperature Sensors, all priced under $72.99.

Carquest Premium – Cabin Air Temperature Sensor (Part No.WTC2089)

Cabin Air Temperature Sensor

from

$72.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top Picks for 2014 Jaguar XFR Air Conditioning Parts

Upgrade Jaguar XFRs with top-quality Air Conditioning Parts parts, including 13 OEM and aftermarket selections for your 2014 model.

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39186)

A/C Block Type O-Ring Expansion Valve

from

$31.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)

A/C Desiccant Bag Kit

from

$38.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54822)

A/C Plate and Fin Evaporator

from

$114.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

DENSO – First Time Fit A/C Expansion Valve (Part No.R1045922793ND)

First Time Fit A/C Expansion Valve

from

$51.44
Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:
  • OEM Quality and Direct fit Application
  • Designed to the exact OEM specifications
See More

Nissens – A/C Compressor w/ Clutch, New (Part No.R1000462864NSS)

A/C Compressor w/ Clutch, New

from

$818.93
Maximum performance and durability in climate powering Nissens compressors are high-quality products that are designed and manufactured according to the highest quality and OE standards. The products are thoroughly tested in Nissens advanced test center to ensure maximum compression performance, long durability and a minimum of noise. Furthermore, the optimal design of Nissens compressors guarantees an ideal fit on the vehicle, permitting a smooth and easy installation process. Why opt for Nissens compressors?

Product Features:
  • Maximum performance and durability in climate powering
  • Excellent quality designed and manufactured to match the OE standards 100%
  • Perfect finish of all components snap rings, bearings, pistons, scrolls, valves/shaft, swash plate/clutch
  • Unique reliability thorough durability and performance tests: real life test and sterile test series
  • Minimized noise and vibration level
  • Perfect fit and easy installation
  • User-friendly installation guide included in the product warranty brochure
  • Well-packed products ensuring protection from transport damage First fit on Nissens compressors
  • Pre-filled with the right type of PAG lubricant offering the right viscosity and amount
  • Equipped with O-rings
  • Equipped with electrical adaptors (Multi Fit applications)
  • Equipped with pre-filters (whenever needed)
See More

Carquest Premium – A/C New, with Clutch, with PXC16 Compressor (Part No.T198500)

A/C New, with Clutch, with PXC16 Compressor

from

$479.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Autopart International Inc – A/C Compressor (Part No.R10003199162API)

A/C Compressor

from

$450.69
A/C Compressor

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2346)

ABS Wheel Speed Sensor

from

$348.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713261)

A/C Condenser and Receiver Drier Assembly

from

$308.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Nissens – A/C Condenser (Part No.R1030269211NSS)

A/C Condenser

from

$268.07
Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.
See More

ATE – ABS Speed Sensor (Part No.N6030391054ATE)

ABS Speed Sensor

from

$184.91
The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Santech – A/C Expansion Valve (Part No.R1045401039SII)

A/C Expansion Valve

from

$36.17
A/C Expansion Valve

Autopart International Inc – A/C Expansion Valve (Part No.R10453349366API)

A/C Expansion Valve

from

$31.30
A/C Expansion Valve

In-Demand Blower Motor and Related Products for 2014 Jaguar XFRs

Select from 5 premium Blower Motor and Related Products parts for your 2014 Jaguar XFR, with prices ranging from $123.54 to $203.00.

Carquest Premium – Blower Motor: With Wheel (Part No.75817)

Blower Motor: With Wheel

from

$144.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1361)

HVAC Blower Motor Resistor

from

$129.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Dorman – Blower Motor Resisto (Part No.R2102965753DOR)

Blower Motor Resisto

from

$203.00
Blower Motor Resisto

Dorman – BMR (Part No.973-255)

BMR

from

$156.99
Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Autopart International Inc – Blower Motor (Part No.R20312074107API)

Blower Motor

from

$123.54
Blower Motor

Top-Rated Cooling and Climate Controls Brands For Your 2014 Jaguar XFR

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2014 Jaguar XFRs. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2014 XFR start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2014 Jaguar XFR Cooling and Climate Controls

When it comes to maintaining or upgrading your 2014 Jaguar XFR, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2014 Jaguar XFR. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

Popular Carquest Premium 2014 Jaguar XFR Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2014 Jaguar XFR owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2014 XFR, Advance Auto Parts carries a full inventory of 10 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Jaguar in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $31.49 to $479.99, plus, with more than 49 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

A/C New, with Clutch, with PXC16 Compressor
from
$479.99
This product is not rated

A/C New, with Clutch, with PXC16 Compressor

“”

HVAC Blower Motor Resistor
from
$129.99
This product is not rated

HVAC Blower Motor Resistor

“”

Coolant Temperature Sensor
from
$50.99
This product is not rated

Coolant Temperature Sensor

“”

FAQs for 2014 Jaguar XFR Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2014 Jaguar XFRs?

Out of 36 Cooling and Climate Controls that fit 2014 Jaguar XFRs, the following parts are the top sellers:

What’s the price range for 2014 Jaguar XFR Cooling and Climate Controls?

Cooling and Climate Control prices for the 2014 Jaguar XFR start at $3.37 and go up to $818.93 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2014 Jaguar XFR?

The average price for Cooling and Climate Controls for the 2014 Jaguar XFR is $154.51. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Jaguar XFR model years?

Yes, we currently carry Cooling and Climate Controls for 5 model years of Jaguar XFRs between 2010 and 2015. Cooling and Climate Controls are bought most frequently for the following model years: 2015, 2013, 2012, 2011, and 2010.

What are the cheapest Cooling and Climate Controls for my 2014 Jaguar XFR?

The cheapest 2014 Jaguar XFR Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2014 Jaguar XFR?

Out of 344 reviews by customers, our 2014 Jaguar XFR Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2014 Jaguar XFR and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2014 Jaguar XFR?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2014 Jaguar XFR:

Can I get help with 2014 Jaguar XFR Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jaguar Cooling and Climate Controls and more.

What is your return policy for Jaguar XFR Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Jaguar XFR Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.