2010 Jaguar XFR Cooling and Climate Controls
More 2010 Jaguar XFR Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2010 Jaguar XFR, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2010 Jaguar XFR Cooling and Climate Controls
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3775)
from
$299.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1361)
from
$129.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.
Product Features:
See More
Product Features:
- Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
- Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
- Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
- Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
Behr – Radiator (Part No.G1000655306BEH)
from
$717.27
Radiator
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713261)
from
$308.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specificat
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
- Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- vibration testing
- blast testing
- and salt spray testing to simulate real world conditions.
Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)
from
$38.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Dorman – Pressurized Coolant Reservoir: White; Black, Plastic, Original Equipment Replacement (Part No.603-664)
from
$145.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir matches the fit and function of the original part
- Ideal solution – engineered for a seamless installation
- Durable construction – manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Carquest Premium – A/C Pressure Transducer Connector (Part No.PTA1151)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Blower Motor Resisto (Part No.R2102965753DOR)
from
$206.63
Blower Motor Resisto
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1346)
from
$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39186)
from
$31.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Autopart International Inc – A/C Compressor (Part No.R10003199162API)
from
$444.05
A/C Compressor
Dorman – Thermostat Assembly: Includes Bolts, Housing, and Thermostat, 192 Degrees (Part No.902-5169)
from
$52.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Motorcraft – Water Temperature Sensor (Part No.C6020457259MTR)
from
$29.50
Motorcraft Water temperature sensors are designed for durability and electrical performance. Motorcraft digital Water temperature sensors are designed to work with Ford and Lincoln transmissions and engine control computers.
Product Features:
See More
Product Features:
- Sensors are tested according to Ford Motor Company noise, vibration and harshness (NVH) engineering standards
- Recommended by Ford Motor Company
Geba – Water Pump (Part No.G3000939228GEB)
from
$186.14
Water Pump
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26820)
from
$20.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R134a and R12 refrigerants
- Application specific
- SUV and rear air applications
Eurospare – Water Pump Gasket (Part No.G3040468437ESP)
from
$27.09
Water Pump Gasket
Autopart International Inc – Blower Motor (Part No.R20312074107API)
from
$121.70
Blower Motor
Nissens – A/C Condenser (Part No.R10301070378NSS)
from
$592.89
Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.
Carquest Premium – Thermostat Kit: Gasket Included (Part No.86211)
from
$53.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable)
- 100% virgin resin material to insure durability
- 100% leak tested
- Direct-fit replacement for ease of installation
Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10263)
from
$17.49
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Factory Air – Cap and Valve A/C System Seal Kit (Part No.26826)
from
$19.99
All the seals needed to complete the job; Compatible with both R134a And R12 refrigerants; Application specific; SUV And rear air applications
See More
NTK – Engine Coolant Temperature Sensor (Part No.EF0159)
from
$57.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Cabin Air Temperature Sensor (Part No.WTC2089)
from
$72.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54822)
from
$114.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.
Product Features:
See More
Product Features:
- The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
- The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
- The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
- The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
- O-Rings and gaskets necessary for installation are included.
Popular 2010 Jaguar XFR Cooling and Climate Controls Categories
2010 Jaguar XFR Cooling and Climate Controls
You count on your 2010 Jaguar XFR to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 41 Cooling and Climate Controls ranging in price from $3.38 to $717.27, you’re sure to find everything you need for your 2010 Jaguar XFR.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 15 different brands like Permatex, Carquest Premium, and Factory Air. 2010 Jaguar XFR Cooling and Climate Controls start as low as $3.38!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 447 extensive product reviews on 2010 Jaguar XFR Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are A/C Plate and Fin Evaporator with 1.3 stars and A/C Block Type O-Ring Expansion Valve with 5.0 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2010 Jaguar XFR below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2010 Jaguar XFR
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Jaguar XFR running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.
Popular Factory Air Cooling and Climate Controls
You’ll find popular Factory Air brand products across Air Conditioning Parts. All are waiting to get your 2010 Jaguar XFR back on the road. Some of the top-rated Factory Air products in these categories are:
Top-Rated Permatex Cooling and Climate Controls
If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2010 Jaguar XFR, and some of our most reviewed Permatex parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
FAQs for 2010 Jaguar XFR Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2010 Jaguar XFR?
Out of 41 Cooling and Climate Controls for the 2010 Jaguar XFR, the most popular in our inventory are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
What are the top-rated 2010 Jaguar XFR Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 2010 Jaguar XFR based on customer reviews/ratings are:
from
$114.99
(3)
A/C Plate and Fin Evaporator
“At first glance this looks like a perfect match for the stock AC evaporator on my 2016 F-type. The website said it was an exact fit so I ordered it an”
