Name: HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
Brand: MagnaFlow
SKU: 93480
Price: 684.99 USD

from

$684.99

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93480. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2001-2006 Chevrolet Silverado 2500 HD, 2001-2006 GMC Sierra 2500 HD, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$114.99

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$6.29

Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:

CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from quality material for durability and long life
BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$51.99

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left
Complete kit – includes clamp and fasteners for a thorough, secure repair
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.79

Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:

OE DESIGN — Designed with OE-style features for easy installation and fit
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$34.99

This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
Application specific – designed for a wide range of vehicle years, makes and models
This part has undergone vehicle try-on testing for conformance to product standards and quality

from

$86.00

Exhaust Clamp

from

$237.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$213.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$40.49

Complete your exhaust repair with DynoMax® exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service

Product Features:

KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
OE DESIGN — Designed with OE-style features (where applicable) for easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from quality steel for durability and long life
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$17.29

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement for a proper fit every time
Durable steel construction
New hardware helps fix exhaust leaks
Also available in the Exhaust Manifold Hardware Kit

from

$195.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$595.99

Designed to deliver superior flow and OE-style sound, Walker® Quiet-Flow® mufflers are available for top-selling domestic and foreign vehicles.

Product Features:

EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
RESISTS CORROSION — Internal drainage system helps reduce moisture collection
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on

from

$374.99

Made of 100 Percent heavy Gauge aluminized steel our Installer Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Installer Series is suitable for areas with moderate environmental conditions. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere, and also provided with the free exhaust tip with this Installer Series.

Product Features:

The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
Vehicle Maintains Optimal Operating Temperatures
Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
Made Of 100 Percent Heavy Gauge Aluminized Steel
Designed To Provide The Cost Conscious Consumer With The Same High Quality Design And Craftsmanship
Easy, Bolt-On Design, Makes Easy To Install

from

$627.99

Built from 16 Gauge T409 stainless steel our SLM Series performance exhaust systems offer a value price without compromising on the quality built into every component. Featuring a two piece tail we replaced the muffler with an MBRP muffler delete pipe to provide you with the ultimate in free flow exhaust. Constructed to the same specifications as our top of the line Pro Series we back this line with a 5 Year Warranty.

Product Features:

Built From 16 Gauge T409 Stainless Steel
More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
Bolt-On, No Weld Design
Bolt-On, No Weld Design Makes Installation A No Hassle One

from

$85.99

EGT sensors frequently seize in the exhaust bung, making replacement difficult and damaging the bung. This Dorman OE FIX solution directly replaces the sensor and comes with a bung repair kit just in case.

Product Features:

Convenient solution – this replacement EGT sensor comes with a bung repair kit in case the bung is damaged during removal
Cost-effective fix – bung repair kit allows direct repair of damaged bung instead of replacing entire exhaust pipe
Complete kit – comes with sensor, new bung, weld-on plate and zip tie
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$56.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$145.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
COMPATIBILITY — Ideal for weld or clamp installations

from

$204.99

ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that does not see much precipitation, or if you are looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.

Product Features:

Heavy-Gauge Aluminized Steel Tubing Helps To Resist Dings And Dents Caused By Debris Under Vehicle
Mandrel Bending Ensures No Rippling In The Bends
Good Durability
Easy To Install

from

$144.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
COMPATIBILITY — Ideal for weld or clamp installations

from

$41.49

ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:

Material Is Not Affected By Corrosion Or Extreme Heat
The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
Substantially Stronger Than Grade 8 Hardware
Nominally Rated At 170,000 PSI Tensile Strength
Set of 12
3/8” Wide Header Flange
1.181? Underhead Length

from

$12.79

Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal – your typical header flange. Includes twelve (12) M8 – 1.25 x 25mm header bolts.

Product Features:

12 per Package
Fits GM LS Series Engines
Black Oxide Finish Resists Corrosion

from

$85.99

Vibe Lock Header Bolt Kit

from

$17.79

Exh. Manifold Gasket

from

$17.99

GM Genuine Parts Exhaust Manifold Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They help form a gas-tight connection between the exhaust manifold and cylinder heads. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent exhaust leaks
Helps provide a tight seal where the exhaust manifold mounts to the engine block
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$27.49

As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.