2014 GMC Sierra 1500 Belts and Hoses

Essential Belts and Hoses for 2014 GMC Sierra 1500s

GM Genuine Parts – Positive Crankcase Ventilation (PCV) Hose (Part No.12582227)

Positive Crankcase Ventilation (PCV) Hose

from

$40.99
GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Gates – Quick-Lok½ Heater Hose Connector (Part No.28500)

Quick-Lok½ Heater Hose Connector

from

$19.49
Product Features:
  • Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
  • Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
  • Fit just as the OEM quick connects for easy installation as well as removal
See More

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89258)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$48.49
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • Rust resistant construction
See More

Dorman – High Pressure Fuel Line (Part No.904-965)

High Pressure Fuel Line

from

$49.99
Product Features:
  • Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles.
  • Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
  • Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
  • Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership
See More

Dorman – High Pressure Fuel Line (Part No.904-966)

High Pressure Fuel Line

from

$29.99
Product Features:
  • Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles.
  • Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
  • Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
  • Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership
See More

Dorman – Fuel Filler Neck Hose (Part No.573-159)

Fuel Filler Neck Hose

from

$41.99
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair..

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
  • Durable construction – made of fuel-resistant materials to reduce future failure potential
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Fuel Filler Neck Hose (Part No.573-166)

Fuel Filler Neck Hose

from

$24.99
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
  • Durable construction – made of fuel-resistant materials to reduce future failure potential
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.50" Diameter (Part No.E71990)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.50" Diameter

from

$40.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Modular Coolant Hose (Part No.22438)

Premium Modular Coolant Hose

from

$68.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38008)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$27.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dayco – Dayco, Acc. Belt Tension Pulley, Idler (Part No.G60111221082DAY)

Dayco, Acc. Belt Tension Pulley, Idler

from

$22.89
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

GM Genuine Parts – Engine Oil Cooler Hose Kit (Part No.15203890)

Engine Oil Cooler Hose Kit

from

$154.99
GM Genuine Parts Engine Oil Cooler Hose Assembly are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). Product contains Perfluorooctanoic acid (PFOA): Not for import into European Union (EU)

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – AT Oil Cooler Hose A (Part No.J2068754421DOR)

AT Oil Cooler Hose A

from

$38.42
AT Oil Cooler Hose A

GM Genuine Parts – Fuel Feed Hose (Part No.84129526)

Fuel Feed Hose

from

$107.99
GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (Part No.E71988)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter

from

$75.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24.13" Long, 1.28" Diameter (Part No.E71987)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24.13" Long, 1.28" Diameter

from

$49.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count (Part No.5060930)

Poly Rib Belt Serpentine Belt; 93 Long, 6 Rib Count

from

$53.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (Part No.950K6)

Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count

from

$40.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dorman – OE Fix Stainless Steel Fuel Line: 64" Long (Part No.919-814)

OE Fix Stainless Steel Fuel Line: 64" Long

from

$373.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:
  • Upgraded replacement – the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance.
  • Pre-formed fit – these lines are already shaped to fit specific applications for easier installation.
  • Complete kit – includes brackets and fittings for thorough repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dorman – Flexible Braided Stainless Steel Fuel Line (Part No.819-839)

Flexible Braided Stainless Steel Fuel Line

from

$421.99
Original-style hard fuel lines can be tough to route under the vehicle. These Dorman OE FIX lines are stainless steel over flexible PTFE tubing, made to specific length for extended cab GMC Sierra and Chevy Silverado pickups, with new brackets and factory connectors for the easiest possible installation..

Product Features:
  • Ready to install – these braided stainless steel and PTFE flexible fuel lines are already cut to specific length for standard cab GMC Sierra and Chevy Silverado pickups, with all brackets and connectors.
  • Full length – these lines are made to the correct length for the specified vehicle, but flexible so they’re easier to route than rigid lines, saving replacement time
  • Upgraded materials – high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions
  • Trustworthy quality – engineered and assembled in the United States and backed by decades of aftermarket experience
See More

ACDelco – Heater Hose (Part No.R3030514616ACD)

Heater Hose

from

$42.37
Heater Hose

Gates – Premium Modular Coolant Hose (Part No.22554)

Premium Modular Coolant Hose

from

$63.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000423328BAN)

Multi Rib (Serpentine) Belt

from

$44.00
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dayco – Poly Rib Serpentine Belt (Part No.W100050252DAY)

Poly Rib Serpentine Belt

from

$50.39
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

GM Genuine Parts – Fuel Feed Hose (Part No.10381608)

Fuel Feed Hose

from

$105.99
GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Feed Hose (Part No.15229141)

Fuel Feed Hose

from

$108.99
GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Feed Hose (Part No.23248013)

Fuel Feed Hose

from

$97.99
GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Upgrade your 2014 GMC Sierra 1500 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2014 GMC Sierra 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your Sierra 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Belts and Hoses for the 2014 GMC Sierra 1500, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2014 GMC Sierra 1500 at great prices. Our Belts and Hoses inventory for this model ranges from just $12.49 to $169.99, with an average price of $63.59. Our 51 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 2014 GMC Sierra 1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 GMC Sierra 1500, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Driveworks, Dorman, and more. Dayco Belts and Hoses start at just $30.49 and boast an impressive 5 stars average rating from customers. Driveworks and Dorman also bring quality to the table, with Belts and Hoses available starting at $12.49, and at an average 4 stars rating. With 916 customer reviews and counting, our 2014 GMC Sierra 1500 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 GMC Sierra 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 1500 in top shape, all in one place. Start shopping confidently below for your 2014 GMC Sierra 1500!

Best-Selling Engine Cooling Hoses for 2014 GMC Sierra 1500s

Enhance the driving experience in your GMC with 1 quality Engine Cooling Hose components, starting at $169.99.

Dorman – Engine Heater Hose Assembly (Part No.626-738)

Engine Heater Hose Assembly

from

$169.99
Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future..

Product Features:
  • Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability.
  • Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
  • Complete replacement – hoses come with necessary clamps for easy installation
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Most Popular 2014 GMC Sierra 1500 Serpentine and V Belts

Customize your GMC with 18 Serpentine and V Belts products like Serpentine Belts, V-Belts, and Seal Pullers, all priced under $98.97.

Driveworks – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.715K6)

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count

from

$23.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count (Part No.875K6)

Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count

from

$31.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count (Part No.5060875)

Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count

from

$53.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.5060715)

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count

from

$39.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (Part No.4PK888EE)

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required

from

$30.49
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning
  • Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
See More

Dayco – Ela Poly Rib Belt (Part No.E030296)

Ela Poly Rib Belt

from

$33.99
Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:
  • Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
  • Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
  • Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
  • These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt
See More

Dayco – Stretch Serpentine Belt; 30.43 Long, 3 Rib Count, Zip Tie Required (Part No.3PK773EE)

Stretch Serpentine Belt; 30.43 Long, 3 Rib Count, Zip Tie Required

from

$31.49
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning.
  • Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
  • Elasticityáallows for long-lasting performance and proper tension
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dayco – Poly Rib Serpentine Belt (Part No.W100050252DAY)

Poly Rib Serpentine Belt

from

$50.39
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

Dayco – Dayco, Drive Belt (Part No.W10001221356DAY)

Dayco, Drive Belt

from

$32.42
Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:
  • Constructed with aramid-reinforced EPDM compounds
  • Engineered to conform to high mileage, worn or misaligned drives
  • Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)
See More

ACDelco – 12658178 GM Original Equipment Air Conditioning Compressor Belt Kit with Tool (Part No.W1005603985ACD)

12658178 GM Original Equipment Air Conditioning Compressor Belt Kit with Tool

from

$98.97
The ACDelco GM Original Equipment Air Conditioning Compressor Belt Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 72" Long, 6 Rib Count, Exact Fit (Part No.K060714HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 72" Long, 6 Rib Count, Exact Fit

from

$42.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000603773BAN)

Multi Rib (Serpentine) Belt

from

$30.12
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 87.91" Long, 6 Rib Count, Exact Fit (Part No.K060874HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 87.91" Long, 6 Rib Count, Exact Fit

from

$80.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060874)

Micro-V« Serpentine Drive Belt

from

$60.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Bando – Drive Belt (Part No.W10002440886BAN)

Drive Belt

from

$47.37
Drive Belt

Mitsuboshi – Drive Belt (Part No.W1000532493MBL)

Drive Belt

from

$42.80
The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Mitsuboshi – Drive V-Belt (Part No.W1000663122MBL)

Drive V-Belt

from

$24.38
The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Top Picks for 2014 GMC Sierra 1500 Fuel Hoses

Upgrade GMC Sierra 1500s with top-quality Fuel Hoses parts, including 8 OEM and aftermarket selections for your 2014 model.

GM Genuine Parts – Fuel Feed Hose (Part No.84129526)

Fuel Feed Hose

from

$107.99
GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Feed Hose (Part No.23248013)

Fuel Feed Hose

from

$97.99
GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Nylon Fuel Line: 8 mm ID, 27" Long (Part No.904-017)

Nylon Fuel Line: 8 mm ID, 27" Long

from

$103.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions..

Product Features:
  • Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks.
  • Durable design – withstands tough underhood and undercar conditions
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions
See More

Dorman – Nylon Fuel Line: 8 mm ID, 32" Long (Part No.904-011)

Nylon Fuel Line: 8 mm ID, 32" Long

from

$66.99
This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions..

Product Features:
  • Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks.
  • Durable design – withstands tough underhood and undercar conditions
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions
See More

Dorman – FUEL LINE (Part No.904-012)

FUEL LINE

from

$60.99
Product Features:
  • Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks.
  • Durable design – withstands tough underhood and undercar conditions
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions
See More

Dorman – High Pressure Fuel Line (Part No.904-965)

High Pressure Fuel Line

from

$49.99
Product Features:
  • Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles.
  • Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
  • Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
  • Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership
See More

Dorman – Fuel Filler Neck Hose (Part No.573-159)

Fuel Filler Neck Hose

from

$41.99
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair..

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
  • Durable construction – made of fuel-resistant materials to reduce future failure potential
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – High Pressure Fuel Line (Part No.904-966)

High Pressure Fuel Line

from

$29.99
Product Features:
  • Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles.
  • Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
  • Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
  • Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership
See More

In-Demand Heater Hoses for 2014 GMC Sierra 1500s

Select from 11 premium Heater Hoses parts for your 2014 GMC Sierra 1500, with prices ranging from $12.49 to $128.99.

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409)

Coolant Connector - Inlet/Outlet 3/4In. Tube x 5/8In. Hose

from

$12.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector.
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409HP)

Coolant Connector - Inlet/Outlet 3/4In. Tube x 5/8In. Hose

from

$24.49
HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:
  • Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part.
  • Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration.
  • Easy to install – matches the original equipment form and dimensions for a simple replacement
  • Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life
See More

Gates – Premium Modular Coolant Hose (Part No.24478)

Premium Modular Coolant Hose

from

$86.99
Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation + the leading cause of hose failure
  • EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Modular Coolant Hose (Part No.24479)

Premium Modular Coolant Hose

from

$75.99
Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation + the leading cause of hose failure
  • EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.12118)

Premium Molded Heater Hose

from

$128.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Modular Coolant Hose (Part No.22554)

Premium Modular Coolant Hose

from

$63.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Heater Hose (Part No.12117)

Premium Molded Heater Hose

from

$59.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Engine Heater Hose Assembly (Part No.626-780)

Engine Heater Hose Assembly

from

$54.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life..

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – Engine Heater Hose Assembly (Part No.626-755)

Engine Heater Hose Assembly

from

$50.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – Heater Hose Connecto (Part No.R3036834786DOR)

Heater Hose Connecto

from

$37.86
Heater Hose Connecto

Dorman – Heater Hose Connecto (Part No.R3036834787DOR)

Heater Hose Connecto

from

$36.35
Heater Hose Connecto

Most Sold 2014 GMC Sierra 1500 Belt Tensioners

Explore our best-selling GMC parts for the 2014 Sierra 1500 among 1 OEM and aftermarket options starting from $101.99.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999545A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$101.99
This accessory drive tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. This part was designed for the 2014-2019 Chevrolet Silverado / GMC Sierra,Yukon/Cadillac Escalade with 4.3/5.3/6.2L. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part. This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a lift-lug feature for ease of installation, heavy duty steel pulley with a 6203 close tolerance ball bearings pocket for rugged durability and Electro-deposited coating for superior corrosion resistance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy duty steel pulley with a 6203 close tolerance ball bearings pocket for rugged durability and Electro-deposited coating for superior corrosion resistance
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
  • Installation instructions included
See More

Top-Rated Belts and Hoses Brands For Your 2014 GMC Sierra 1500

Shop for the best-rated brands offering Belts and Hoses and other products for your 2014 GMC Sierra 1500s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Driveworks, and Dorman, and more. Belts and Hoses from these brands that fit a 2014 Sierra 1500 start at just $12.49 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2014 GMC Sierra 1500 Belts and Hoses

When it comes to maintaining or upgrading your 2014 GMC Sierra 1500, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2014 GMC Sierra 1500. With over 9 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.49, with an average price of just $52.30. Plus, with over 146 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required
from
$30.49
This product is not rated

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required

“”

Ela Poly Rib Belt
from
$33.99
This product is not rated

Ela Poly Rib Belt

“”

Popular Driveworks 2014 GMC Sierra 1500 Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2014 GMC Sierra 1500 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2014 Sierra 1500, Advance Auto Parts carries a full inventory of 2 Driveworks Belts and Hoses. Plus you will be keeping your GMC in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $23.99 to $31.99, plus, with more than 54 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count
from
$23.99

(7)

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count

“Fits perfect on my 99 mercury cougar.”

Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count
from
$31.99

(47)

Poly Rib Belt Serpentine Belt; 87.6 Long, 6 Rib Count

“Fit great has been on for a week and no issues”

FAQs for 2014 GMC Sierra 1500 Belts and Hoses

Which Belts and Hoses are best-sellers for 2014 GMC Sierra 1500s?

Out of 51 Belts and Hoses that fit 2014 GMC Sierra 1500s, the following parts are the top sellers:

What’s the price range for 2014 GMC Sierra 1500 Belts and Hoses?

Belts and Hose prices for the 2014 GMC Sierra 1500 start at $12.49 and go up to $169.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2014 GMC Sierra 1500?

The average price for Belts and Hoses for the 2014 GMC Sierra 1500 is $63.59. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other GMC Sierra 1500 model years?

Yes, we currently carry Belts and Hoses for 25 model years of GMC Sierra 1500s between 1999 and 2024. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2013.

What are the cheapest Belts and Hoses for my 2014 GMC Sierra 1500?

The cheapest 2014 GMC Sierra 1500 Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2014 GMC Sierra 1500?

Out of 916 reviews by customers, our 2014 GMC Sierra 1500 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2014 GMC Sierra 1500 and their top-rated products:

What types of Belts and Hoses do you sell for my 2014 GMC Sierra 1500?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2014 GMC Sierra 1500:

Can I get help with 2014 GMC Sierra 1500 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.

What is your return policy for GMC Sierra 1500 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new GMC Sierra 1500 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.