Name: Coil On Plug Boots-8
Brand: DENSO
SKU: 671-8182
Price: 87.99 USD

from

$87.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$75.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$62.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$191.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$101.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$27.49

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$70.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$46.49

BWD is an aftermarket leader, providing a premium line of engine management products. We are constantly evolving to give BWD customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes

from

$10.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket

from

$31.99

This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$35.99

Flame-Thrower COP for 2 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.

Product Features:

30,000 Volts. Direct OEM replacement.
Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.

from

$73.93

Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.

Product Features:

Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
Radio-Frequency Interference (RFI) Suppression
Magnets hold strength for the coil to maintain proper energy output
Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
Coil Housing is engineered to withstand extremes in temperature without cracking

from

$90.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:

These coils provide the exact spark timing that helps maximize the engine and emissions performance
RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
Engineered to help withstand temperature extremes
Internal insulation displacement connection is helps make high-reliability internal connections
Interior insulation helps ensure no internal arcing
Right fit for each application; helps provide ease of installation and removal
High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
Housings engineered to help resist cracking in the most extreme conditions
Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

from

$242.99

Flame-Thrower COP for 2 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.

Product Features:

30,000 Volts. Direct OEM replacement.
Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.

from

$152.57

Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.

Product Features:

Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
Radio-Frequency Interference (RFI) Suppression
Magnets hold strength for the coil to maintain proper energy output
Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
Coil Housing is engineered to withstand extremes in temperature without cracking

from

$343.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$6.79

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

from

$11.29

Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.

Product Features:

Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models
Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$11.49

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$8.79

Product Features:

from

$95.99

Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:

Backed by Motorcraft’s Service Parts Warranty
Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
Optimized wire lengths help minimize part numbers while still providing proper fit.
Wires are optimum lengths for easy installation.
EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
Motorcraft ignition components help prevent false check engine lights.

from

$56.99

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$29.99

With more than double the energy output of a stock coil, E3s new 2 Valve coil features a stainless steel spark plug contact ring with a ferrite lug to suppress EMI/ RFI noise. Designed to work with the factory DIS electronic controls as well as high performance aftermarket ignition systems, the resistance and inductance values have been optimized to increase output at high RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound. Fits the 1997 to 2013 2 Valve Ford engines.

Product Features:

Designed to work with factory DIS electronic ignition systems
High temperature epoxy provides excellent thermal conductivity and long life
Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
Fits 1997-2013 2-Valve Ford engines
Crosses to MSD 8248

from

$44.99

Whether youve got a brand new Mustang GT or are dropping a Coyote crate motor into a classic 32 Lil Deuce Coupe, you need E3s ultra-high output Coyote Coil. With more than double the energy output of a stock coil, E3s Coyote coil features a stainless steel spark plug contact ring with a ferrite lug to suppress EMI/RFI noise and optimized resistance and inductance values which increase output at higher RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra-long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound.Ideally suited for a wide range of both naturally aspirated and forced induction racing applications, E3.619 fits 2011 to current model year 5.0L Coyote engines. When coupled with an E3 Spark Plug featuring DiamondFIRE Technology, youll experience tire shredding power at its finest.

Product Features:

Double the energy output of a stock coil
High temperature expoxy provides excellent thermal conductivity and long life
Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
Fits 5.0L 2011-2016 Current Coyote engines
Crosses to MSD 8248