2014 Ford Escape Belts and Hoses

Below you will find various in-demand Ford Belts and Hoses, components and accessories for your 2014 Escape. Advance Auto Parts has popular Escape parts like Heater Hoses, Fuel Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other Escape model years including 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2014 Ford Escape Belts and Hoses below and start saving instantly.

Popular 2014 Ford Escape Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Radiator Overflow Hoses

Engine Oil Cooler Hoses

Upper Radiator Hoses

Heater Hoses

Fuel Injector Hose Kits

Coolant Hose Connectors

V-Belts

Coolant Expansion Tank Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2014 Ford Escapes

from

$34.99

Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:

Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models.
Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$37.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$17.99

This radiator coolant hose connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this radiator coolant hose connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.19

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$31.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$13.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$49.49

This Litens aftermarket part is designed, engineered, and produced by the Original Equipment (O.E.) tensioner supplier. The original equipment supplier of this popular Ford Motor tensioner has upgraded the original design incorporating the latest technology to improve performance while maintaining the original fit and form. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada” Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour,
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$77.99

This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Ford, Mazda, and Mercury applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$77.11

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:

Ethylene-propylene diolefin monomer (EPDM) rubber reinforced with single rayon-braid tube
Provides resistance to the damaging effects of coolants, antifreeze and additives
Stands up to high pressures
Resists deterioration from heat, aging, ozone and underhood chemicals
Recommended by Ford Motor Company

from

$55.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$78.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$33.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$74.11

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:

Pre-shaped hose allows easy installation
Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
Recommended by Ford Motor Company

from

$15.32

MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:

Excellent resistance to high temperatures
Resists chemical attack (oils, fuels etc.)
Excellent Ozone resistance
Good resistance to abrasion
High resistance to vibration

from

$27.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$32.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$42.99

INJECTOR FUEL LINE

from

$52.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$17.79

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$14.19

The Motorcraft expansion tank hose is the GENUINE part, in the car manufacturer’s box, as sold by the new car dealer.

Product Features:

Original Equipment Supplier
Inner linings are resistant to electrochemical cracking
High strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 125C

from

$114.49

Radiator Hose

from

$122.33

Radiator Hose

from

$69.99

This replacement coolant overflow hose is engineered to match the fit and function of the original equipment overflow hose assembly. Manufactured from quality materials to withstand extreme temperature changes for a long service life.

Product Features:

Direct replacement – this coolant overflow hose matches the fit and function of the original equipment hose
Quality materials – made of heat-resistant materials for durable performance under normal operating conditions
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$25.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$32.49

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$106.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

Upgrade your 2014 Ford Escape with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2014 Ford Escape, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Belts and Hoses are key to keeping your Escape functioning at its best. At Advance Auto Parts, we offer a wide selection of 59 Belts and Hoses for the 2014 Ford Escape, designed to meet your needs without breaking the bank. From Heater Hose replacements to Fuel Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2014 Ford Escape at great prices. Our Belts and Hoses inventory for this model ranges from just $13.81 to $136.22, with an average price of $55.44. Our 59 Belts and Hoses in stock come from 13 trusted brands, so you’re sure to find the right part for your 2014 Ford Escape without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Ford Escape, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Litens, and more. Dayco Belts and Hoses start at just $13.81 and boast an impressive 5 stars average rating from customers. With 560 customer reviews and counting, our 2014 Ford Escape Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Ford Escape is always ready to roll. We’re committed to providing you with everything you need to keep your Escape in top shape, all in one place. Start shopping confidently below for your 2014 Ford Escape!

Best-Selling Heater Hoses for 2014 Ford Escapes

Enhance the driving experience in your Ford with 8 quality Heater Hose components, starting at $40.39.

show more show less

from

$72.90

Heater Hose

from

$77.11

Heater Hose

from

$77.11

Heater Hose Set

from

$75.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Upgraded solution – this replacement engine heater hose assembly match original fit and function and features aluminum connectors for added durability
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with the necessary clamps for easier installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$52.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$45.99

Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$41.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$40.39

Heater Hose

Most Popular 2014 Ford Escape Fuel Hoses

Customize your Ford with 1 Fuel Hoses products like Fuel Injector Hose Kits, all priced under $42.99.

show more show less

from

$42.99

INJECTOR FUEL LINE

Top Picks for 2014 Ford Escape Serpentine and V Belts

Upgrade Ford Escapes with top-quality Serpentine and V Belts parts, including 16 OEM and aftermarket selections for your 2014 model.

show more show less

from

$29.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$36.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$37.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$30.49

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$20.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$62.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$43.36

Drive Belt

from

$30.66

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$32.99

SERPENTINE BELT

from

$27.11

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$55.18

Drive Belt

from

$47.46

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
Laminated die-cut edge design provides quiet, efficient operation
Stands up to grease, oil, dirt and high temperatures
Flexes easily around the smallest pulley
Helps preserve belt strength
Helps eliminate rough edges present on cut-cog designed belts
Provides quiet operation

from

$36.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$31.87

Drive Belt

from

$18.16

Drive Belt

from

$17.83

Drive Belt

In-Demand Engine Cooling Hoses for 2014 Ford Escapes

Select from 11 premium Engine Cooling Hoses parts for your 2014 Ford Escape, with prices ranging from $47.99 to $122.33.

show more show less

from

$54.99

Shock Kit

from

$59.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$122.33

Radiator Hose

from

$119.58

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:

Pre-shaped hose allows easy installation
Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
Recommended by Ford Motor Company

from

$101.99

Direct replacement – this coolant overflow hose matches the fit and function of the original equipment hose.
Quality materials – made of heat-resistant materials for durable performance under normal operating conditions
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$85.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$78.99

Direct replacement – this coolant overflow hose matches the fit and function of the original equipment hose
Quality materials – made of heat-resistant materials for durable performance under normal operating conditions
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$78.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$69.99

Direct replacement – this coolant overflow hose matches the fit and function of the original equipment hose
Quality materials – made of heat-resistant materials for durable performance under normal operating conditions
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$67.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$47.99

Direct replacement – this coolant overflow hose matches the fit and function of the original equipment hose.
Quality materials – made of heat-resistant materials for durable performance under normal operating conditions
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

Most Sold 2014 Ford Escape Belt Tensioners

Explore our best-selling Ford parts for the 2014 Escape among 5 OEM and aftermarket options starting from $82.99.

show more show less

from

$87.99

This accessory drive tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. This part was designed for the 2013-present Ford Explorer, Focus Fusion, Transit Connect w/2.0/2.5L. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part. This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a lift-lug feature for ease of installation, a 6203 ball bearing and a plastic pulley molded to exacting specifications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
A plastic pulley specifically molded with tight radial run out for reduced noise and longer life
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Installation instructions included

from

$82.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$136.22

Acc. Belt Tensioner

from

$95.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$84.99

This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Ford applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Install pin included for ease of installation
Installation instructions included

Top-Rated Belts and Hoses Brands For Your 2014 Ford Escape

Shop for the best-rated brands offering Belts and Hoses and other products for your 2014 Ford Escapes. Below you’ll find some of our best rated Belts and Hoses from Dayco and Litens, and more. Belts and Hoses from these brands that fit a 2014 Escape start at just $13.81 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2014 Ford Escape Belts and Hoses

When it comes to maintaining or upgrading your 2014 Ford Escape, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2014 Ford Escape. With over 17 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.81, with an average price of just $51.36. Plus, with over 269 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$62.99

This product is not rated

Poly Rib Belt Serpentine Belt; 53.94 Long, 4 Rib Count

“”

from
$82.99

This product is not rated

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

“”

from
$30.49

This product is not rated

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required

“”

Popular Litens 2014 Ford Escape Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2014 Ford Escape owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2014 Escape, Advance Auto Parts carries a full inventory of 4 Litens Belts and Hoses. Plus you will be keeping your Ford in peak condition while saving money because prices on these Litens Belts and Hoses range from $29.99 to $87.99, plus, with more than 7 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$29.99

This product is not rated

Idler Pulley: Direct Fit, Thermoplastic, 65mm Diameter, w/ Hardware

“”

from
$84.99

This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

from
$87.99

This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

FAQs for 2014 Ford Escape Belts and Hoses

Which Belts and Hoses are best-sellers for 2014 Ford Escapes?

Out of 59 Belts and Hoses that fit 2014 Ford Escapes, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (10457737) – $29.99
Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (12482995) – $30.49
Accessory Drive Belt Tensioner – Original Equipment Quality (11872461) – $87.99

What’s the price range for 2014 Ford Escape Belts and Hoses?

Belts and Hose prices for the 2014 Ford Escape start at $13.81 and go up to $136.22 for the most premium parts.

What’s the average price of a Belts and Hose for a 2014 Ford Escape?

The average price for Belts and Hoses for the 2014 Ford Escape is $55.44. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Ford Escape model years?

Yes, we currently carry Belts and Hoses for 22 model years of Ford Escapes between 2001 and 2023. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2013.

What are the cheapest Belts and Hoses for my 2014 Ford Escape?

The cheapest 2014 Ford Escape Belts and Hoses we carry in stock are:

Dayco, Acc. Belt Tension Pulley (11884746) – $13.81
Dayco, Heater Hose (11492654) – $17.15
Drive Belt (50054422) – $17.83
Engine Heater Hose Assembly (12007565) – $17.99
Drive Belt (12611967) – $18.16

What are the top-rated Belts and Hoses that fit the 2014 Ford Escape?

Out of 560 reviews by customers, our 2014 Ford Escape Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2014 Ford Escape and their top-rated products:

Serpentine and V Belts
- Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (15130081) – $29.99
- Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (20060938) – $36.49
- Poly Rib Belt Serpentine Belt; 53.54 Long, 4 Rib Count (19270246) – $37.49

What types of Belts and Hoses do you sell for my 2014 Ford Escape?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2014 Ford Escape:

Can I get help with 2014 Ford Escape Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Belts and Hoses and more.

What is your return policy for Ford Escape Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Ford Escape Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Ford Escape Belts and Hoses

Dorman – Help – PCV Hose Kit (Part No.46034)

Gates – Premium Molded Coolant Hose (Part No.23538)

Dorman – Engine Heater Hose Assembly (Part No.626-632)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000117823MBL)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves (Part No.89015)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.5" Long, 1.50" Diameter (Part No.B72385)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999051A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999429A)

Motorcraft – Heater Hose (Part No.R3030359355MTR)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 1/2 Inch Length (Part No.87999)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22.5" Long, 1.31" Diameter (Part No.E72781)

Gates – Premium Molded Coolant Hose (Part No.22569)

Motorcraft – Motorcraft Radiator Hose (Part No.G2000428755MTR)

MacKay – Molded Radiator Hose (Part No.G2000152306MKY)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38008)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38006)

Dorman – INJECTOR FUEL LINE (Part No.809-012)

Gates – V-Ribbed Serpentine Belt: 60.905" Long, 6 Rib Count, Exact Fit (Part No.K060604)

Driveworks – Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count (Part No.425K6)

Motorcraft – Expansion Tank Hose (Part No.G2030372971MTR)

Motorcraft – Radiator Hose (Part No.G2000673567MTR)

Motorcraft – Radiator Hose (Part No.G2000673546MTR)

Dorman – Engine Heater Hose Assembly (Part No.626-652)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38018)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900022A)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dorman – Engine Oil Cooler Line (Part No.625-213)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Motorcraft – Heater Hose (Part No.R3030515715MTR)

Motorcraft – Heater Hose (Part No.R3030515713MTR)

Motorcraft – Heater Hose Set (Part No.R3031681289MTR)

Dorman – Engine Heater Hose Assembly (Part No.626-681)

Dorman – Molded Heater Hose: Rubber (Part No.626-687)

Dorman – Molded Heater Hose: Plastic/Rubber (Part No.626-648)

Dorman – Engine Heater Hose Assembly (Part No.626-737)

Motorcraft – Heater Hose (Part No.R3030515711MTR)

Dorman – INJECTOR FUEL LINE (Part No.809-012)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Dayco – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.5060613)

Dayco – Poly Rib Belt Serpentine Belt; 53.54 Long, 4 Rib Count (Part No.5040535)

Dayco – Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (Part No.4PK888EE)

Driveworks – Poly Rib Belt Serpentine Belt; 61.25 Long, 6 Rib Count (Part No.613K6)

Dayco – Poly Rib Belt Serpentine Belt; 53.94 Long, 4 Rib Count (Part No.5040539)

Bando – Drive Belt (Part No.W10001529972BAN)

Mitsuboshi – Drive Belt (Part No.W1000532668MBL)

Motorcraft – SERPENTINE BELT (Part No.JK4-361-A)

ContiTech – Drive V-Belt (Part No.W1000433669CON)

Motorcraft – Drive Belt (Part No.W10003087229MTR)

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000437306MTR)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060612)

Bando – Drive Belt (Part No.W10002440878BAN)

Mitsuboshi – Drive Belt (Part No.W10002440878MBL)

Worldpac – Drive Belt (Part No.W10003087229MBL)

Suncore – Shock Kit (Part No.2-12S252420-001)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8" Long, 1.31" Diameter (Part No.B72784)

Motorcraft – Radiator Hose (Part No.G2000673546MTR)

Motorcraft – Motorcraft Radiator Hose (Part No.G2000537812MTR)

Dorman – Engine Heater Hose Assembly (Part No.626-651)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6.5" Long, 1.31" Diameter (Part No.B72782)

Dorman – Engine Coolant Overflow Hose (Part No.626-719)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22.5" Long, 1.31" Diameter (Part No.E72781)

Dorman – Engine Heater Hose Assembly (Part No.626-652)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8" Long, 1.31" Diameter (Part No.B73087)

Dorman – Engine Heater Hose Assembly (Part No.626-715)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999526A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89669)

Motorcraft – Acc. Belt Tensioner (Part No.G6001533480MTR)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89740)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.950041A)