2014 Chevrolet Malibu Intake Manifold Parts
More 2014 Chevrolet Malibu Intake Manifold Parts
Find your specific 2014 Chevrolet Malibu original or aftermarket Intake Manifold Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2014 Chevrolet Malibu Intake Manifold Parts
Edelbrock – Performer Small Block Oldsmobile 350 Intake Manifold (Part No.7111)
from
$458.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed Idle to 5500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
Edelbrock – RPM Air-Gap Big Block Chevy 2-O Black Intake Manifold (Part No.75613)
from
$588.99
Edelbrock part #75613 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8’s with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. The RPM Air-Gap incorporates the same race-winning te
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.45 in. Front Height, 5.22 in. Center Height, 6 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
ACDelco – GM Original Equipment Intake Manifold Assembly (Part No.B1200580182ACD)
from
$257.72
The ACDelco GM Original Equipment Engine Intake Manifold is a GM-recommended replacement for your vehicle’s original component. The intake manifold evenly distributes the incoming engine air to each of the cylinders, ensuring the proper amount of air mixes with the proper amount of fuel. This original equipment engine intake manifold has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of applications
- Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Edelbrock – Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L) (Part No.2111)
from
$358.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Produces at Least 18 More Horsepower
- Best Matched with Edelbrock 500cfm Carburetor
Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)
from
$257.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)
from
$267.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- For Trucks or Vans Use PN[2701] Instead
- Not for LT1 or Chevy Bowtie Heads
- Not for 1987 and Later Stock Aluminum Heads
Weiand – Action +Plus; Intake Manifold (Part No.8120P)
from
$349.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.
Product Features:
See More
Product Features:
- Low Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold (Part No.75011)
from
$713.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Polished Version Of Edelbrock PN[7501]
- Polish is Hand-Buffed for Brilliant Shine
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)
from
$504.99Product Features:
- Polished Version Of Edelbrock PN[2701]
- Polish is Hand-Buffed for Brilliant Shine
- Maximizes Performance with Edelbrock Carburetors
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Dorman – Upper Aluminum Intake Manifold (Part No.615-197)
from
$288.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
- Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
- Trustworthy design – built by the industry leader in aftermarket manifolds
Holley – Intake Manifold (Part No.300-5)
from
$363.99
Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro-Stock champion. Holley’s products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress-up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl’s, Holley products can give you the edge you need over the competition.
Product Features:
See More
Product Features:
- Single Plane/Open Plenum Design
- Deep Plenum Design With Isolated Runners
- 4150 Square Bore Carburetor Mounting Flange
- Power Band 4500-8500 rpm
- Height Front 4.77 in. Rear 6.16 in.
- Port Size 2.30 in. Height 1.60 in. Width
- 50 State Legal
Edelbrock – Performer RPM Small Block Chevy Polished Intake Manifold (Part No.71011)
from
$578.99Product Features:
- Polished Version Of Edelbrock PN[7101]
- Polish is Hand-Buffed for Brilliant Shine
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Holley – Intake Manifold (Part No.300-4)
from
$355.99
Holley Intake Manifolds feature a cast aluminum construction and have a long tradition of being one of the best products on the market. Review the information below for Holley intake specifications.
Product Features:
See More
Product Features:
- Single Plane/Open Plenum Design
- Deep Plenum Design With Isolated Runners
- 4150 Square Bore Carburetor Mounting Flange
- Power Band 4500-8500 rpm
- Height Front 4.75 in. Rear 6.25 in.
- Port Size 1.85 in. Height 1.60 in. Width
Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)
from
$356.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake
- For Square Bore Carburetors Only
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98015 T)
from
$151.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90314-3)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98013 T)
from
$136.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90565)
from
$66.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98003 T)
from
$99.99
Product Features:
See More
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Lower & Upper Intake Manifold Gasket Set: 6 Piece Set (Part No.615-725)
from
$61.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 96351-1)
from
$49.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Mahle – Intake Manifold Gasket Set (Part No.A8043431419MAH)
from
$94.68
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head sets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials in all head sets
- Packaged in shrink wrapped tray
- Every part you need to complete your gasket repair in one package unless otherwise stated
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90314-2)
from
$29.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MIK 98015 T)
from
$159.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Included all parts needed to complete the repair
- Included all parts needed to complete the repair
Dorman – Dorman Intake Manifold Gasket Set (Part No.A8043376696DOR)
from
$94.63
Dorman’s Intake Manifold Gasket Sets include all the gaskets and other hardware necessary for a complete, exact repair. In certain applications, Dorman improved metal construction has been used for increased gasket durability.
Product Features:
See More
Product Features:
- Kit provides ease and convenience of use
- Airtight gasket seal prevents vacuum and in some cases coolant leaks
- Bolts with thread locker provided for ease of installation (where applicable)
- Direct replacement for a proper fit every time
Mr. Gasket – Ultra-Seal Intake Manifold Gasket with Silicone Beading (Part No.5821)
from
$31.99
Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 97208)
from
$39.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
ACDelco – Intake Manifold Gask (Part No.A8040742953ACD)
from
$5.28
Intake Manifold Gask
Popular 2014 Chevrolet Malibu Intake Manifold Parts Categories
2014 Chevrolet Malibu Intake Manifold Parts
Maybe you’re in the middle of a full rebuild of that 2014 Chevrolet Malibu. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 3 different Intake Manifold Parts in our inventory ranging from $8.35 to $182.28. That means you can find the exact parts or products you need to keep that 2014 Chevrolet Malibu running smoothly.
Intake Manifold Parts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Chevrolet Malibu. FELPRO and ACDelco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Intake Manifold Parts for your 2014 Chevrolet Malibu, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Intake Manifold Parts to keep your 2014 Chevrolet Malibu rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Intake Manifold Parts Brands To Make Your 2014 Chevrolet Malibu Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Chevrolet Malibu demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Malibu the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.
FAQs for 2014 Chevrolet Malibu Intake Manifold Parts
What are the most purchased Intake Manifold Parts for the 2014 Chevrolet Malibu?
Out of 3 Intake Manifold Parts for the 2014 Chevrolet Malibu, the most popular in our inventory are:
from
$182.28
This product is not rated
GM Original Equipment Intake Manifold Assembly
Intake Manifolds
from
$8.35
This product is not rated
GM Original Equipment Intake Manifold Gasket
Intake Manifold Gasket Sets
