2014 BMW 335i Exhaust Parts

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49769. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2010 BMW 335i, 2007-2008 BMW 335xi, and more, this direct-fit catalytic converter also interchanges with OE parts 18 30 7 592 437 and 18 30 7 553 825. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49767. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2010 BMW 335i, 2007-2008 BMW 335xi, and more, this direct-fit catalytic converter also interchanges with OE part 18 30 7 553 595. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
• BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Exh. Man. to Pipe Ga

Cat. Converter Gaske

Exhaust Clamp

Exhaust Clamp

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Contains all gaskets and seals to remove and replace exhaust manifold
• Contains all gaskets and seals to remove and replace exhaust manifold

Exhaust Manifold Gasket

aFe introduces the MACH Force XP dual axle-back exhaust system for the 11-14 Mustang GT V8-5.0L. In recent testing this system produced 18 horsepower and 15 lbs. x ft. of torque. This exhaust is constructed from 3 in. mandrel-bent, stainless steel and is MIG-welded. The system uses high-flow, stainless steel mufflers which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual, gloss black, 4 in. double wall, 304 stainless steel aFe laser etched tips. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Increased Horsepower And Torque
• Constructed From 2.5 Mandrel Bent Stainless Steel Tubing
• TIG Welded
• Incl. Dual High Flow Transverse Mufflers

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.

Product Features:

• 100% TIG-Welded
• Dual High Flow Mufflers
• Uses Factory Mounting Locations
• Street Legal

Exhaust Valve: This axle-back exhaust system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation; This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Dual 4″ Polished Tips; Finishing off this system are dual 4″ diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3″ to 2-1/2″ mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

Product Features:

• 100% Hand TIG-Welded 304 Stainless Steel Tubing
• Factory Style Exhaust Valve
• Utilizes High Flow Transverse Muffler
• Dual Polished 304 Stainless Steel Tips

aFe is proud to introduce the Dual Cat-Back Exhaust System for the 2012-2013 Volkswagen Beetle with the L4-2.0L Turbo engine. In recent testing this Mach Force XP cat-back exhaust system produced 7 horsepower and 14 lbs. x ft. of torque. This exhaust system is constructed out of mandrel-bent, 2.50 in. 304 stainless steel and includes MIG welded hangers and OE-style band clamps for a simple, leak-free, bolt-on installation. A huge 6 in. round high-flow muffler is used to keep exhaust drone to a minimum while maintaining a sporty sound. aFe utilizes dual 4 in. double wall, polished, stainless steel tips with an aFe laser-etched logo which provides an aggressive yet elegant look. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 2.5 in. Dia. 304 Stainless Steel
• 100% Hand TIG Welded
• 3 in. Slash Cut Tips
• Hassle Free Installation

The MagnaFlow Sport Series Cat-Back Performance Exhaust System 16542 16542 enhances your 3.0L 2007-2010 BMW with an aggressive character that is sure to help you stand out from the other BMW you encounter on the street. With its 2.5in. diameter fast-flowing mandrel bent main piping that passes through 2 Straight-Through mufflers before ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this dyno-proven BMW exhaust system refuses to be ignored. As such, 16542 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system’s cat-back design replaces all your import’s stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 16542 is backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Racing inspired sound
• High-performance lightweight design
• Dyno-proven performance

aFe introduces the MACH Force XP dual axle-back exhaust system for the 11-14 Mustang GT V8-5.0L. In recent testing this system produced 18 horsepower and 15 lbs. x ft. of torque. This exhaust is constructed from 3 in. mandrel-bent, stainless steel and is MIG-welded. The system uses high-flow, stainless steel mufflers which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual, gloss black, 4 in. double wall, 304 stainless steel aFe laser etched tips. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Increased Horsepower And Torque
• Constructed From 2.5 Mandrel Bent Stainless Steel Tubing
• TIG Welded
• Incl. Dual High Flow Transverse Mufflers

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.

Product Features:

• 100% TIG-Welded
• Dual High Flow Mufflers
• Uses Factory Mounting Locations
• Street Legal

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

Product Features:

• Factory Style Exhaust Valve
• TIG Welded For Strength
• Corrosion Resistance/Durability
• Breath Taking Appearance