2013 Volkswagen Passat Drivetrains
More 2013 Volkswagen Passat Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2013 Volkswagen Passat, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2013 Volkswagen Passat Drivetrains
National – Bearings (Part No.LM806649)
from
$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Rein – CV Boot Kit (Part No.BKN0035R)
from
$24.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Rein – Axle Bolt (Part No.K4031237010RIN)
from
$15.65
Axle Bolt
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-29710)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.710316)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Corteco – Manual Transmission Seal (Part No.J1150288670CFW)
from
$9.33
Manual Transmission Seal
Corteco – Diff. Side Cover Sea (Part No.J7041454773CFW)
from
$17.17
Diff. Side Cover Sea
Elring – Gasket Maker (Part No.3K2003361623ELR)
from
$12.47
Gasket Maker
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV72085)
from
$124.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
GKN Drivetech – Axle Assembly, New (Part No.K400085249GKN)
from
$367.72
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
Valvoline – VAL EP ATF 6/1 QT (Part No.899179)
from
$14.99
VAL EP ATF 6/1 QT
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
National – Shaft Repair Sleeve (Part No.99146)
from
$28.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Torque To Yield Axle Bolts; 24 mm Hex Size, 134 mm Length, 16 mm Thread Diameter, 2 Pack (Part No.615-006)
from
$14.29
This axle bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Torque To Yield Axle Bolt; 24 mm Hex Size, 134 mm Length, 16 mm Thread Diameter, 1 Pack (Part No.615-006.1)
from
$12.29
This axle bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
CRP – Constant Velocity Boot Clamp (Part No.K6030274803)
from
$2.20
Constant Velocity Boot Clamp
Febi – CV Boot Clamp (Part No.K603015050FEB)
from
$3.71
CV Boot Clamp
National – Bearings (Part No.107)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99196)
from
$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Rein – CV Joint Boot Kit (Part No.K6010104889RIN)
from
$34.44
With Clamps and Grease The Rein CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Dorman – C.V. Joint Solvent Welded Split Boot Kit Outer (Part No.614-632)
from
$21.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Save labor with easy installation methods
- Comes with grease and clamps
- Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
- The Speedi and Quick Boot are installed without special tools
Meyle – CV Joint Kit (Part No.K6000229942MEY)
from
$77.10
Using state-of-the-art production methods MEYLE C.V. joints are manufactured to highest quality standards. All components are precision-manufactured and perfectly geared to one another. MEYLE supplies C.V. joints as kits with accessory material including axle boot, grease and mounting hardware.
Product Features:
See More
Product Features:
- Highly resilient axle boot
- Induction-hardened rolling body raceways
- Precision-honed serration
GKN Drivetech – CV Joint Kit (Part No.K6000135720GKN)
from
$177.53
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
National – Shaft Repair Sleeve (Part No.99177)
from
$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
INA – Input Shaft Bearing (Part No.J1052786336INA)
from
$12.16
Input Shaft Bearing
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 2013 Volkswagen Passat Drivetrains Categories
2013 Volkswagen Passat Drivetrains
You count on your 2013 Volkswagen Passat to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 33 Drivetrains ranging in price from $2.20 to $214.54, you’re sure to find everything you need for your 2013 Volkswagen Passat.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like National, GKN Drivetech, and Carquest Premium. 2013 Volkswagen Passat Drivetrains start as low as $2.20!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 12 extensive product reviews on 2013 Volkswagen Passat Drivetrains.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2013 Volkswagen Passat below to get started!
Top-Rated Drivetrains Brands For Your 2013 Volkswagen Passat
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Volkswagen Passat running right for years to come. In our inventory you’ll find brands like National, GKN Drivetech, Carquest Premium, and even more.
Popular National Drivetrains
You’ll find popular National brand products across Drive Shafts and Axles. All are waiting to get your 2013 Volkswagen Passat back on the road. Some of the top-rated National products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2013 Volkswagen Passat, and some of our most reviewed parts include:
FAQs for 2013 Volkswagen Passat Drivetrains
What are the most purchased Drivetrains for the 2013 Volkswagen Passat?
Out of 33 Drivetrains for the 2013 Volkswagen Passat, the most popular in our inventory are:
