Name: Original Equipment Quality Direct Ignition Coil
Brand: DENSO
SKU: 673-9100
Price: 128.99 USD

from

$128.99

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$72.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$31.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Allows you to repair only the cracked or worn part of the ignition coil wiring instead of the entire harness
Direct-fit replacement part ensures ease of installation
Quality-engineered replacement part properly restores vehicle drivability and ignition coil function
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$224.99

This replacement ignition switch is a direct replacement for a damaged or worn-out original equipment switch Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

Ideal replacement – this ignition switch matches the fit and function of the original equipment switch to restore proper operation to the ignition circuit
Durable construction – this ignition switch is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$23.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$67.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$51.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$101.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$39.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$60.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$19.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$44.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$101.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$47.49

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$104.93

Bosch Camshaft Position Sensors provide Angle for engine management: Camshaft sensors detect the camshaft position for the injection sequence.

Product Features:

Robust design with Twist insensitive mounting (TIM)
Reliable digital measurement and wide temperature range
High accuracy and long service life

from

$103.99

All Bosch hall senders provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

Built-in circuit protection to ensure your electronics and computer systems stay unharmed
Sturdy design, vibration resistant and thermal stability

from

$4.99

ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

GM regularly updates production and service part designs to integrate new materials and technologies
High-Quality Copper Core: Designed with high-quality copper cores for reliable performance and efficient operation.
Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced durability and consistent performance.
OE Replacement: These spark plugs are true OE parts, originally installed or validated by General Motors for GM vehicles.
Outstanding Suppression Characteristics: Engineered to deliver outstanding suppression characteristics, ensuring smooth and efficient engine performance.
Versatile Applications: Providing a high-quality replacement for a wide range of vehicles.

from

$10.29

Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:

OE grade platinum on both center and ground electrods
Premium shell construction with machine-rolled threads
Superior thermal conductivity
Sustained spark performance over 60,000 miles
Reduced secondary required voltage, increased ignition efficiency
Satisfied customers, reduced shop comebacks
Double Platinum

from

$6.79

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

Works to optimize engine performance for a longer life and improved fuel economy
OE design
Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
Platinum ball welding process provides a consistent point of contact for enhanced adhesion

from

$3.49

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full required voltage at the spark gap with a 100% leak-proof, gas-tight seal. The multi-rib insulator reduces the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor minimizes radio frequency interference (RFI) and electrode erosion, making these spark plugs a reliable choice for enhancing your vehicle’s performance.

Product Features:

Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
Multi-rib insulator reduces danger of “flash-over”
One-piece terminal post adds strength
Resistor reduces radio frequency interference (RFI) and electrode erosion
Quick Starts and Smooth Acceleration: The Autolite Copper Spark Plug is engineered to deliver quick starts and smooth acceleration, enhancing your vehicle’s overall performance.
Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you achieve better fuel economy, saving you money at the pump.

from

$134.30

The Karlyn Ignition Wire Set incorporates two layers of high grade silicone for superior heat and voltage protection. The double extruded Silicone-over-Silicone wire contains 19 strands of tinned copper core which provides super conductivity and corrosion resistance.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Resistant to high temperatures, corrosion and vibration.
Ignition noise suppressed.
Includes O.E. Type Connectors, Looms, Sensors and Harness Clips when required

from

$53.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$144.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal