from

$40.25

A/C Pressure Switch

from

$83.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$9.99

New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.73

Drier Desiccant Element

from

$139.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$363.33

As a leader in the development of innovative evaporator technology, DENSO offers the highest grade aftermarket products for a variety of applications. Our OE experience and know-how ensure our aftermarket products provide the unmatched performance, reliability and ease of installation you expect from DENSO. Evaporator performance is essential for proper air-conditioning performance. DENSO’s evaporator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturers’ rigid specifications. All DENSO First Time Fit® evaporators pass our strict durability and function tests. Evaporator Types Available: Multitank Superslim (MS). Parallel flow single-tank. Serpentine. In 2002, DENSO introduced the thinnest evaporator of its kind. The Multitank Superslim (MS) type evaporator is only 38mm in width and uses the world’s thinnest tubes and plates, making it smaller and more lightweight than earlier evaporator designs.

Product Features:

Thinner – Thinner tube (1.7mm) and shorter fin height (5mm) improves heat exchange efficiency
High Performance – Separating the tubes and the tanks increases the tank flow path area and reduces refrigerant pressure loss
Light Weight – The tube’s zinc diffusion layer improves corrosion resistance, resulting in very thin tube plate thickness (0.2mm)
Excellent Draining Capacity – Slits on the outer fins make draining easy
Dependable and lightweight
Made to fit the first time without the need for adjustments or modifications

from

$41.72

The Denso Drier Desiccant Element is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$18.15

Drier Desiccant Elem

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$9.99

New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:

MT2909
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$15.05

The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$444.62

A/C Compressor

from

$589.99

As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$193.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$137.34

ABS Speed Sensor

from

$32.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R134a and R12 refrigerants
Application specific
SUV and rear air applications

from

$99.99

New Platinum Pro A/C Condenser, With Receiver Drier, 2.4/2.7/2.5/3.5 Liter Engines

Product Features:

With Receiver Drier, 2.4/2.7/2.5/3.5 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$222.34

Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.

Product Features:

Zinc diffusion layer improves corrosion resistance
Unique fin design to minimize airflow blockage
High performance design reduces the required compressor power
System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
Engineered to Perfection: OE quality engineered for unparalleled performance
Exact Fit: Condensers install with speed and ease
Reduces required compressor power, resulting improved fuel economy
Restores A/C performance to as-new condition
First Time Fit® assures bolt-in replacement; no brackets or adapters
Greater Durability: Pure aluminum construction provides greater resistance for corrosion

from

$276.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
vibration testing
blast testing
and salt spray testing to simulate real world conditions.

from

$30.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$45.69

Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:

OEM Quality and Direct fit Application
Designed to the exact OEM specifications

from

$48.86

METRIX expansion valves are manufactured to OE specifications and provide durability and optimum performance. The Thermostatic valves are engineered using the latest OEM designs and are made with the highest quality brass and copper. METRIX expansion blocks are machined from a single block of high grade aluminum or brass and are manufactured application specific according to OE size, shape and color.

Product Features:

OE-Quality – Exact Fit
Tonnage and superheat are rated to exact OEM specifications
Utilizes the factory style fittings and connectors
Compatible with R12 and R134a refrigerant
The power valve is seasoned prior to assembly and is fully function tested
Designed and manufactured to OE specifications
Includes all necessary fitment components. When required units will have sealing washers and/or O-Rings. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C componen

from

$653.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
O-Rings and gaskets necessary for installation are included.

from

$643.99

As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$399.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$16.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features: