2013 Ram 2500 Exhaust System Kits

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• 7 in. Polished Tip w/Laser Cut Age Badge
• Increased Flow And Performance
• High Quality Band Clamps

Cat-back System 409S – Dual Rear or Side Exit – American Thunder -Moderate Sound

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Gain 22% more exhaust flow for improved performance and sound. This DPF-back exhaust is 100% hand MIG-welded, mandrel bent, 4″ 409 stainless steel tubing for strength and durability and is finished off with a 5″ intercooled, polished exhaust tip to reduce EGT’s. This system utilizes factory mounting locations, and includes high quality hardware for a quick, hassle-free installation. Stainless Steel Construction This DPF-Back is constructed of 100% hand MIG-welded, mandrel bent, 4″ 409 stainless steel tubing for strength and durability. 5″ Diameter Exhaust Tip: Finishing off this exhaust is a 5″ diameter slash cut, stainless steel tip with intercooling vents to reduce EGT’s at the tailpipe and are badged with laser-cut aFe POWER plates riveted on. Installation is a Snap This system uses factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 degree sealing surface. Flow and Performance This exhaust system is constructed of 4″ mandrel-bent 409 stainless steel tubing for maximum flow and durability. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.

Product Features:

• 100% MIG Welded
• Quality Hardware

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from 304 stainless steel for durability. The exhaust system is constructed from 3-1/2″ MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 4″ Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 4″ diameter black 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Stainless Steel Muffler
• Very Aggressive Sound
• Bayonet Style Hangers For Secure Fit

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from 304 stainless steel for durability. The exhaust system is constructed from 3-1/2″ MIG-welded, mandrel bent 409 stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 4″ Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 4″ diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Stainless Steel Muffler
• Very Aggressive Sound
• Bayonet Style Hangers For Secure Fit

5.7L HEMI engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

Product Features:

• Direct replacement – the components in this kit are designed to match the function of the original equipment exhaust manifold gaskets and mounting hardware on specified vehicles
• Time-saver – hassle-free alternative to searching for quality replacements for original equipment components that have failed from heat cycling or corrosion
• Application-specific – precision manufactured to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience