2013 Ram 1500 Exhaust System Kits

The MagnaFlow Ram 1500 D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19433 offers enthusiasts an easy way to upgrade their Ram 1500 5.7L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 5.7L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19433 is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19439 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 3in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19439 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system’s durable, corrosion resistant stainless steel construction is backed by MagnaFlow’s limited lifetime warranty.

The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19440 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 3in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19440 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system’s durable, corrosion resistant stainless steel construction is backed by MagnaFlow’s limited lifetime warranty.

HEMI 5.7L engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

“Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance. 3″” mandrel bent, 409 stainless steel tubing and high-flow, muffler improve performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, 5″” polished stainless steel tips with aFe Power logo badging for a unique, custom appearance.”

BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) Technology Is Designed For High-Performance.

This Flowmaster Outlaw cat-back exhaust system is for 2019-2024, 2026 (New body) RAM 1500 trucks is perfect for maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system fits RAM trucks with the 5.7L Hemi engine and features all mandrel-bent 409 stainless steel 3.00-inch tubing flowing into a Super 10 Series muffler and exiting into large 3.00-inch dual mandrel-bent tailpipes for maximum sound and performance. The system comes with two sets of tailpipe exits for you to choose from, either straight out the back under the bumper, or exiting behind the rear wheels, which is ideal for towing applications. The tailpipes are finished off with a pair of large 4.00-inch black ceramic coated stainless steel tips and the exhaust system is covered by our Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Fits 2/4 wheel drives with 140.5, 144.5 and 153.5-inch wheelbases.

BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) Technology Is Designed For High-Performance.

Borla(R) Cat-Back(TM) and Axle-Back multi-core technology is designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla(R)Sound of Power respected by motoring enthusiasts everywhere.

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

“Flowmaster’s Signature Series Cat-back exhaust system is designed specifically for the 2019-2024, 2026 RAM truck (new body) with 5.7L Hemi and factory dual exhaust. Features include full brushed 304 stainless steel construction, large 3.00-inch flanged inlet pipe flowing in the single inlet/dual outlet Signature Series “”straight-through”” muffler for great sound and maximum performance. This premium exhaust system is TIG welded for a stronger, more precise weld that looks as good as this system sounds. The dual 2.50-inch mandrel bent tailpipes clear the factory hitch and spare tire and exit out through the factory rear bumper cutouts with large 4.50-inch diameter PVD coated black chrome 304S stainless steel tips giving your RAM that custom look that goes hand in hand with that deep performance Signature Series sound. Max dyno gains of 13 hp and 13 lb-ft at the rear wheels. The system uses all the factory hanger locations and connections for an easy installation that you can do at home. Includes installation instructions and all necessary hardware. Note: This system fits all wheelbases, both two and four wheel drive models along with all cab and bed configurations.”

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16870 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16870 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16870 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Ram 1500 Street Series 19508 has been designed from the ground up to make your 3.0L Ram 1500 sound like and haul like it should thanks to its heavily dyno-tested, durable and corrosion resistant stainless steel design. This Ram 1500 exhaust kit is tuned to produce Moderate exterior and Mild interior sound levels through its fast-flowing, mandrel bent 2.5in. main piping and is compatible with 3.0L engines. The system terminates in a Dual Split Rear exit with 5in. Polished Welded-On-Double Wall-Angle Cut-Rolled Edge tip. Exhaust kit 19508 is tuned to produce our powerful, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. It does this with a filter-back layout that replaces your diesel truck’s stock exhaust system from the particulate filter on back. Extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design. Once you hit the road or trail with this exhaust system hooked up your rig will stand out from the rest as the truest of trucks. 19508 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

The MagnaFlow Ram 1500 Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ram 1500’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19461 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19461 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

“Now your 2019 Dodge Ram 5.7 HEMI can perform and sound as good as it looks with this MACH Force Xp cat-back exhaust system. In-house dyno testing produced gains of up to +22 horsepower and +26 lbs. x ft. torque for towing, track and street performance. 3″” mandrel bent, 409 stainless steel tubing and high-flow, muffler improve performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability and long lasting, good looks, this system is finished with dual, 5″” polished stainless steel tips with aFe Power logo badging for a unique, custom appearance.”

Flowmaster’s American Thunder Cat-back true dual exhaust system for the 2025 – 2026 RAM 1500 with the 3.0-liter Standard and High Output engines gives you a great way to customize your RAM 1500 to your personality. This performance exhaust system fits both 2/4 Wheel drive models and is manufactured from 409 stainless steel for years of trouble-free service and performance. Features include dual 3.00-inch inlet pipes leading into a custom tuned 409 stainless steel American Thunder series muffler for great sound and maximum performance. This Cat-back system includes Flowmaster’s exclusive Scavenger X-Pipe with our D-Port technology for maximum exhaust pulse velocity and helps to create a deep exhaust tone. The dual 3.0-inch mandrel-bent tailpipes exit in the stock location in the factory bumper cut outs with 4.5-inch black ceramic coated tips. Included in the tailpipe assemblies are tuned resonators that help maintain a comfortable experience in the cab. On Standard Output models this system turns the exhaust into a true dual style system like the High Output and RHO models. This will allow for better overall performance gains and will work better with any future engne modifications. Max dyno gains of 35 hp and 33 lb-ft at the rear wheels (HO models) deliver power you can feel! The system uses all the factory hanger locations and connections for an easy installation that you can do at home. Kits include installation instructions and all necessary hardware. Backed by Flowmaster’s Limited Warranty.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.