2013 Mercedes-Benz Sprinter 3500 Engine Parts

Rotomaster remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.
• 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
• All units come with the required gaskets and mounting hardware for easy installation.
• Meets or exceeds O.E. performance.
• Comes with a pre-lube syringe to ensure product protection during installation.

Rein Automotive OE quality oil pan kits are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil pans are designed to tight tolerances to ensure proper sealing. Kits include OE quality gaskets or Ajusil silicone sealant where the OE pans do not use a gasket. Kits include new drain plugs.

Product Features:

• Includes OE quality gaskets or Ajusil silicone sealant
• Includes new drain plugs
• Designed to tight tolerances to ensure proper sealing

Fuel Pump Gasket – M

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

The FEBI Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• High quality precision tension assembly
• OE specified guide rail when supplied
• Durable long life performance

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

Camshaft Follower

Timing Chain

Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:

• Reduce installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants

Crank Position Sensor

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

• Produced from spring steel for long-lasting flexibility of beads
• Thermal stability up to 600F
• Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
• Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
• Tightening instructions provided with each gasket for perfect results

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 07-09; FRHT 07-18; MERCEDES 10-21;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2007-2021
• Weight approx: 4 Lbs

Rein Automotive OE Quality Problem Solver Engine Oil Cooler Replacement Kit covers all Mercedes OM642 engines, which suffer from oil leaks as described in Mercedes Service Bulletin LI18.30-P-055434. This kit includes a Nissens Denmark oil cooler, all seals, gaskets and stretch bolts needed to fix oil leaks inside the V of the engine. The leaks may have lead to “Check Oil Level” or “Oil Level Low” messages on the vehicle instrument cluster, decreased oil level measurements, oil puddles or stains underneath the vehicle. The OE, as well as our Rein solution, uses upgraded Vitom oil cooler seals to combat this issue when a leaking oil cooler makes a complete upgrade the sustainable solution.

Product Features:

• Kit contains all the needed parts (including Nissen oil cooler) ensuring the oil leak repair can be performed successfully
• Eliminates the possibility of an incomplete job and tying-up a lift due to missing parts
• Updated viton seals and hardware are included to enable technicians to perform a high quality repair
• Kit contains two model specific exhaust manifold to turbo charger gaskets

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
• Complete assembly – includes replacement pan and drain plugs to match original components
• Durable design – high-strength coating prevents future corrosion
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Cam Plug

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Valve Keeper

All Nissens oil coolers are manufactured to meet OEM specifications and depending on application are provided with anodic coating, built-in thermo bypass, and/or pressure bypass.

Product Features:

• Meets or exceeds OE specifications
• Manufactured using advanced lightweight materials
• Low weight and design space requirements
• OE Style connections

O-RING

Main Bearing

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

Camshaft Position Sensor,

Oil Filler Cap Gaske

There are two forms of charge air cooling: direct cooling with the ambient air, or indirect cooling via the coolant to the ambient air. Indirect charge air cooling offers benefits in terms of package size and dynamic response and will play an increasingly important role in the future. This involves placing the charge air cooler very close to the engine rather than in the front end of the vehicle. The additional low-temperature radiator needed for indirect charge air cooling is an integral part of the cooling module. Due to the smaller installation depth of the low-temperature radiator compared to a conventional charge air cooler, more space is available in the front end, which can then be used for various measures such as pedestrian protection. The location close to the engine permits the use of shorter charge air lines, cutting the pressure loss by around 50%. The higher density of the cooled charge air and lower pressure loss means there is more air available to the engine for combustion. The result: improved engine responsiveness.

Product Features:

• Manufactured with the highest quality components to ensure product quality and durability
• Built with high density multi-louvered fins for maximum cooling efficiency
• All units are leak tested to ensure a damage-free unit at installation
• OE design to ensure exact fit, form and function for an easy installation

CSF’s new intercooler line is the Industry’s 1st complete full-line of intercoolers ever offered to the automotive aftermarket: with coverage ranging from Audi to Volvo. Several different construction styles are available, ranging from plastic/aluminum to all-aluminum, with standard tubeandfin cores as well as heavy duty barandplate cores being offered to suit the needs of CSF’s customers across the world. CSF is also now offering intercooler cores in many different sizes, as well as the ability to provide custom sizing, specifications, and complete intercoolers through our OEM and Custom manufacturing program. All intercoolers are built to OE specifications, and incorporate the same high quality and value that CSF has been known for and has represented in the industry for over 40 years.

Product Features:

• Manufactured with the highest quality components to ensure product quality and durability
• Built with high density multi-louvered fins for maximum cooling efficiency
• All units are leak tested to ensure a damage-free unit at installation
• OE design to ensure exact fit, form and function for an easy installation

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 3.0 Liter Diesel Engine

Product Features:

• 3.0 Liter Diesel Engine
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle