2013 Jeep Wrangler Air Suspension and Kits

Get your 2-door Jeep® Wrangler JL ready for a day on the trail with the Rancho® 3-in. Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• ORDERING INFO — Box 2 of 2 for master kit RS66121BR9, must order RS66121BR9-1 and RS66121BR9-2 for a complete kit
• COMPATIBILITY — Designed for 2-door Jeep Wrangler JL (non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 3-in. of additional ground clearance needed for a day of rock crawling (may require trimming for 35-in. tires, aftermarket bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS9000®XL shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• NOTES — Compatible with Jeep factory electronic stability system, allows the use of OE wheels and tires (tire size varies between manufacturers)

Get your 2-door Jeep® Wrangler JK ready for a day on the trail with the Rancho® 2-in. Progressive Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• COMPATIBILITY — Designed for 2-door Jeep Wrangler JK
• BUILT FOR THE TRAIL — Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for trail riding or on-road driving (can accommodate 35-in. tires with trimming, bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Kit includes four Rancho RS9000®XL shocks, front and rear progressive rate coil springs, front bump stops, rear brake line relocation brackets and mounting hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 33-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. Features Rancho RS5000®X front and rear shocks that provide additional control and reduce body roll.

Product Features:

• ORDERING INFO — Box 2 of 2 for master kit RS66124BR5, must order RS66124BR5-1 and RS66124BR5-2 for a complete kit
• COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS5000®X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• ENHANCED CONTROL — Rancho RS5000®X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

MasterBshKt

MasterBshKt

Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. Features Rancho RS5000®X front and rear shocks that provide additional control and reduce body roll.

Product Features:

• ORDERING INFO — Box 1 of 2 for master kit RS66124BR5, must order RS66124BR5-1 and RS66124BR5-2 for a complete kit
• COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
• BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding or on-road driving (bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Includes four Rancho RS5000®X shocks, front and rear corner-specific progressive rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
• ENHANCED CONTROL — Rancho RS5000®X shocks with Dynamic Rebound Spring (DRS) technology provides additional control, reduces body roll and prevents rod overextension inside the shock
• SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
• COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

All Models 2-1/2 Inch Front and 2 Inch Rear Metal Spacer Suspension Lift Kit With Coil Spring Spacers, Front Sway Bar End Links, Bump Stop Spacers, and Shock Extension Brackets.

Product Features:

• Made From Premium Materials
• Meets The Highest Quality Standards
• Provide A Smooth, Comfortable Ride
• Maintain That Factory Ride Quality
• Easy Installation

Get your 4-door Jeep® Wrangler JK ready for a day on the trail with the Rancho® 2-in. Progressive Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• COMPATIBILITY — Designed for 4-door Jeep Wrangler JK
• BUILT FOR THE TRAIL — Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for trail riding or on-road driving (can accommodate 35-in. tires with trimming, bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Kit includes four Rancho RS9000®XL shocks, front and rear progressive rate coil springs, front bump stops, rear brake line brackets and mounting hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 33-in. tires, using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These are 100% designed and built in the USA. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These are 100% designed and built in the USA. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

aFe Power’s RaceRunner Series shocks for the all new Jeep Wrangler JL offers the best in suspension performance at an affordable price. These shocks have been newly redesigned and tuned for the perfect balance of on-road comfort and off-road performance. Built using high quality CNC machined components, race-proven multi-seal technology, and durable urethane bushings, the RaceRunner shocks provide improved handling on the JL at stock height and up to 2in of lift. A 2.0in diameter monotube cylinder with Internal Floating Piston (IFP) design helps to provide a custom quality look that performs on your Jeep JL on the highway or off-road terrain.

Product Features:

• Monotube Cylinder
• CNC Machined Components
• Internal Floating Piston For Simple Installation
• Multi Seal Carrier For Zero Leakage

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Shock Kit

aFe Power is proud to introduce the all new “Glide Guard” On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (sold separately) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16″ thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install.

Product Features:

• 3/16 in. Thick Steel For Strength And Rigidity
• Maximum Corrosion Protection
• Counter Sunk Compressor
• Factory Attachment Points