2013 Jeep Wrangler Drivetrains
More 2013 Jeep Wrangler Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2013 Jeep Wrangler, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2013 Jeep Wrangler Drivetrains
Crown Auto Jeep Replacmnt – Drive Shaft/8 Bolt Direct Replacement, Rubber/Steel, Services One Joint (Part No.528533FRK)
from
$163.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. We emphasize offering only a good quality part that’s backed by a strong guarantee. But we know that price is important as well. So, not only will you find Crown parts to be of exceptional quality, but you’ll find them at a great price too
Product Features:
See More
Product Features:
- Repair Kit For Front Or Rear Propeller Shafts
- Leading Manufacturer Of Quality Replacement Parts For Jeep (R)
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Yukon Gear – Spider Gear Kit (Part No.16194)
from
$429.99
Spider Gear Kit
USA Standard Gear – Open Spider Gear Set For Dana Spicer 44, 30 Spline (Part No.39006)
from
$203.99
Product Features:
See More
- Spider gear kit
- Fit Dana Spicer 44 open differential with 30 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
National – Wheel Bearing and Seal Kit (Part No.SBK-1)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Spindle bearing and seal kit
- Includes all components required to complete the repair
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
aFe POWER – Differential Cover (Part No.46-71030R)
from
$374.99
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with red powder-coating and machined fins for a distinctive look. Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration. Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection. Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling. Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.
Product Features:
See More
Product Features:
- Constructed out of durable cast aluminum
- Red powder-coating with machined fins
- Dual neodymium magnetic plugs are used for maximum gear protection
- Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling
National – Bearings (Part No.B-228)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Install Kit Package For Jeep JK Non-Rubicon, 4.56 Ratio (Part No.31012)
from
$866.99
Yukon Gear & Install Kit package for Jeep JK non-Rubicon, 4.56 ratio. This is a complete package that includes front & rear ring & pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front & rear differential in one easy part number.
Product Features:
See More
Product Features:
- Fits Jeep non-Rubicon JK
- 4.56 ratio
- Includes front and rear ring & pinion sets and master overhaul kits
Yukon Gear – Replacement Crush Sleeve For Dana 30 Reverse Front JK & Rubicon JK Front (Part No.33130)
from
$21.99
Replacement Crush sleeve for Dana 30 Reverse front JK & Rubicon JK front. Approx 1.440″ long.
Product Features:
See More
Product Features:
- Crush sleeve for Jeep JK non-Rubicon front
- 1.440″ tall
Yukon Gear – Set Up Bearing (Part No.56037)
from
$189.99
Set-up carrier bearing (2 bearings, no races) 25590. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 44
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
Omix – Transfer Case Drive Chain (Part No.18612.02)
from
$209.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Axle Hub Assembly (Part No.16705.06)
from
$216.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Left Or Right Side
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Driveworks – Camshaft Seal (Part No.S-99139)
Yukon Gear – Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt (Part No.33230)
from
$13.99
Model 35 (standard Open & TracLoc) 8.25″ Chrysler TracLoc cross pin bolt.
Product Features:
See More
Product Features:
- Cross pin bolt for AMC Model 35 with c-clip axles
Dorman – Rear Drive Shaft: Adjustable (Part No.976-739)
from
$621.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 44 (Part No.17017)
from
$46.99
Product Features:
See More
- USA Standard Gear heavy-duty cross pin shaft
- Fits Dana Spicer 44
- Works with Spartan Locker or standard open spider gears
Spartan – Drive Axle Assembly; Jeep W 97-02 DANA 35 NO-A (Part No.RAX1883C)
from
$1774.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.
Product Features:
See More
Product Features:
- Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
- Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
- Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
- Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
Yukon Gear – Model 35 Cover Gasket (Part No.23026)
National – Multi Purpose Seal (Part No.2146)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)
from
$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Axle Bearing Retainer For Dana 44 Rear In Jeep TJ (Part No.33546)
from
$32.99
Product Features:
See More
- Bearing retainer
- Fits Dana Spicer 44 in Jeep TJ
- 1 5/8″ x 3 3/16″ bolt pattern
- 3/16″ bolt holes
Crown Auto Jeep Replacmnt – Driveshaft Flange, Front, Dana 30, Dana 44 (Part No.68004070AB)
from
$71.99
Product Features:
See More
- Front Transfer Case Output
- Limited 12 Month Or 12,000 Mile Warranty
Omix – Pinion Nut (Part No.16584.04)
from
$6.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Crown Auto Jeep Replacmnt – For Use With Rubicon Dana 44 Tru-Lok Differential (Part No.68003569AA)
from
$78.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)
from
$53.99
1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
Yukon Gear – Super Carrier Shim Kit For Model 35 (Part No.55063)
from
$54.99
Model 35 differential carrier Supershim kit.
Product Features:
See More
Product Features:
- Super carrier shim kit for AMC Model 35
- Interlocking design makes installation much easier
Popular 2013 Jeep Wrangler Drivetrains Categories
2013 Jeep Wrangler Drivetrains
You count on your 2013 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 352 Drivetrains ranging in price from $3.99 to $2,234.99, you’re sure to find everything you need for your 2013 Jeep Wrangler.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Spicer, National, and Yukon Gear. 2013 Jeep Wrangler Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 460 extensive product reviews on 2013 Jeep Wrangler Drivetrains. Some of the top-rated Drivetrains products we carry are Axle Housing Cover Gasket with 4.3 stars and Axle Housing Cover Gasket with 4.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2013 Jeep Wrangler below to get started!
Top-Rated Drivetrains Brands For Your 2013 Jeep Wrangler
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like Spicer, National, Yukon Gear, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Universal Joints. All are waiting to get your 2013 Jeep Wrangler back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 2013 Jeep Wrangler, and some of our most reviewed National parts include:
FAQs for 2013 Jeep Wrangler Drivetrains
What are the most purchased Drivetrains for the 2013 Jeep Wrangler?
Out of 352 Drivetrains for the 2013 Jeep Wrangler, the most popular in our inventory are:
What are the top-rated 2013 Jeep Wrangler Drivetrains?
Top-rated Drivetrains for your 2013 Jeep Wrangler based on customer reviews/ratings are:
from
$6.49
(10)
Axle Housing Cover Gasket
“fit perfectly and was easy to work with.no more leaking rear differential.”
from
$6.79
(9)
Axle Housing Cover Gasket
“Felpro gaskets are #1 in my book. Awesome products from Felpro, I highly recommend!”
from
$44.99
(7)
Universal Joint
“Good product; easier to install; one bad thing is caps fall off easy, seems lite on greese”
