2013 GMC Sierra 2500 HD Differentials

Essential 2013 GMC Sierra 2500 HD Differentials

Dorman – Differential Pinion Yoke Assembly (Part No.697-551)

Differential Pinion Yoke Assembly

from

$232.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Motive Gear – RING & PINION SET (Part No.GM11.5-373)

RING & PINION SET

from

$439.99
RING & PINION SET

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R9.5GRLMK)

Differential Master Bearing Kit - Koyo

from

$187.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL GM MASTER 9.5 98 & LATER
See More

National – Multi Purpose Seal (Part No.710507)

Multi Purpose Seal

from

$24.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Motive Gear – Differential Gear Install Kit (Part No.GM9.2IKFL)

Differential Gear Install Kit

from

$52.99


Product Features:
  • MINI INSTALL KIT GM9.2IFS 98 & ON
See More

Yukon Gear – GM 9.25" IFS Side Adjuster Lock, ’11 & Up (Part No.33359)

GM 9.25" IFS Side Adjuster Lock, '11 & Up

from

$38.99
GM 9.25″ IFS side adjuster lock, ’11 & up.

Product Features:
  • Side adjuster lock
  • Fits 2011 and up GM 9.25″ IFS
See More

Yukon Gear – Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck (Part No.16113)

Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck

from

$78.99
Eaton positraction shim kit for GM 14T.

Product Features:
  • Shim kit
  • Fits GM 10.5″ 14 bolt truck Eaton positraction
See More

Yukon Gear – GM Side Gear Spacer Sleeve For GM 9.25" IFS (Part No.33533)

GM Side Gear Spacer Sleeve For GM 9.25" IFS

from

$40.99
Product Features:
  • Side gear spacer sleeve
  • Fits GM 9.25″ IFS
See More

Dorman – 4WD Locking Hub Actuator (Part No.K7027699827DOR)

4WD Locking Hub Actuator

from

$231.58
More like a complete kit than a single part, Dorman’s Four-Wheel Drive (4WD) Actuator comes with all the parts needed to complete the repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:
  • Includes all necessary gaskets and seals (where applicable)
  • Sealed for leak resistance
  • Engineered for durability against harsh road and weather conditions, including water intrusion
  • Quality tested to ensure trouble free installation and performance
See More

aFe POWER – Differential Cover (Part No.46-71060B)

Differential Cover

from

$381.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with black powder-coating and machined fins for a distinctive look. Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration. Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection. Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling. Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Oil Level Sight Glass for Quick/Easy Inspection
See More

Spartan – Drive Axle Assembly; Chev 2500 P/U Axle (Part No.RAX2080A)

Drive Axle Assembly; Chev 2500 P/U Axle

from

$1989.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT45)

TAPERED ROLLER BEARI

from

$24.29
TAPERED ROLLER BEARI

Yukon Gear – 9.5 Standard Open Pinion Gear Thrust Washer (Part No.33374)

9.5 Standard Open Pinion Gear Thrust Washer

from

$28.99
9.5 Standard Open Pinion gear Thrust Washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 9.5″
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)

10.5" GM 14 Bolt Truck Ring Gear Bolt

from

$11.99
10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

Product Features:
  • Ring gear bolt for GM 10.5″ 14 bolt truck
  • 4.56 and up ratio
  • 1/2″ x 18 thread
  • 2.522″ overall length
See More

Yukon Gear – Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33362)

Left Hand Carrier Bearing Adjuster For 9.25" GM IFS

from

$98.99
Left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:
  • Side adjuster
  • Fits 2010 and down GM 9.25″ IFS
  • Left hand side
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)

Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles

from

$315.99
Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Pinion Depth Shims For Chrysler 8.75", 9.25", GM 9.5" & Ford 10.25" (Part No.55059)

Pinion Depth Shims For Chrysler 8.75", 9.25", GM 9.5" & Ford 10.25"

from

$21.99
8.75-42, 8.75-89, 9.25″ Chrysler & GM, 9.5″, 10.25″ pinion shim kit.

Product Features:
  • Pinion depth shim kit for Chrysler 8.75″ with ’42’ or ’89’ case housing, Chrysler 9.25″, GM 9.5″ and Ford 10.25″
See More

Yukon Gear – Pinion Install Kit For ’99 & Newer 10.5" GM 14 Bolt Truck Differential (Part No.13106)

Pinion Install Kit For '99 & Newer 10.5" GM 14 Bolt Truck Differential

from

$449.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1998 and up GM 10.5″ 14 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Bearing Race Driver (Part No.56010)

Bearing Race Driver

from

$215.99
Bearing race drive for Ford 10.25″ and 10.5 axle bearing. (TK 3920). No return.

Product Features:
  • Bearing race driver
  • Fits 3920 race
  • All steel construction
See More

Pro-King – Differential Cover Gasket (Part No.743B303)

Differential Cover Gasket

from

$3.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS

from

$23.99
Product Features:
  • Cross pin bolt
  • Fits GM 9.5″ and 9.25″ IFS
See More

USA Standard Gear – Master Overhaul Kit for the ’10 & Down GM 9.25" IFS Front Differential (Part No.37061)

Master Overhaul Kit for the '10 & Down GM 9.25" IFS Front Differential

from

$594.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 2010 and down GM 9.25″ IFS
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
See More

Motive Gear – Differential Crush Sleeve (Part No.26008741)

Differential Crush Sleeve

from

$12.99


Product Features:
  • CRUSH SLEEVE 14 BOLT 10.5 (3124) 1989 UP MIN ORDER 1000
See More

Yukon Gear – Axle Shaft (Part No.21848)

Axle Shaft

from

$256.99
Axle Shaft

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Dura Grip For GM & Chrysler 11.5", 30 Spline (Part No.26033)

Dura Grip For GM & Chrysler 11.5", 30 Spline

from

$1485.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM and Chrysler 11.5″ with 30 spline axles
  • Clutch style positraction
  • Smooth design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

2013 GMC Sierra 2500 HD Differentials

Maybe you’re in the middle of a full rebuild of that 2013 GMC Sierra 2500 HD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 186 different Differentials in our inventory ranging from $2.99 to $3,169.99. That means you can find the exact parts or products you need to keep that 2013 GMC Sierra 2500 HD running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2013 GMC Sierra 2500 HD. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2013 GMC Sierra 2500 HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 4,782 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.5 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2013 GMC Sierra 2500 HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2013 GMC Sierra 2500 HD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2013 GMC Sierra 2500 HD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Sierra 2500 HD the best it can be. Be sure to browse some of our top Differentials brands and parts.

Top 2013 GMC Sierra 2500 HD Differentials from Dorman

Dorman products are another trusted brand when it comes to Differentials for your 2013 GMC Sierra 2500 HD. Popular Dorman parts include:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
Differential Bearing Kits

FAQs for 2013 GMC Sierra 2500 HD Differentials

What are the most purchased Differentials for the 2013 GMC Sierra 2500 HD?

Out of 186 Differentials for the 2013 GMC Sierra 2500 HD, the most popular in our inventory are:
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 2013 GMC Sierra 2500 HD Differentials?

Top-rated Differentials for your 2013 GMC Sierra 2500 HD based on customer reviews/ratings are:
Multi Purpose Seal
from $34.99
(8)
Multi Purpose Seal
“Nicely made. Heavy duty-just like factory parts.”
Bearings
from $23.99
(7)
Bearings
“Good price”
Multi Purpose Seal
from $44.99
(5)
Multi Purpose Seal
“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”