2013 Ford F-450 Super Duty Drivetrains
More 2013 Ford F-450 Super Duty Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2013 Ford F-450 Super Duty, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2013 Ford F-450 Super Duty Drivetrains
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)
from
$278.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 35 Spline (Part No.28005)
from
$1050.00
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 with 35 spline axles
- 4.56 and up ratio only
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Carquest Premium – 4WD Control Switch Connector (Part No.PTA1771)
from
$43.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.282A)
from
$55.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
National – Bearings (Part No.111)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Crush Sleeve (Part No.J7063751993DOR)
from
$6.07
Crush Sleeve
Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-621)
from
$1607.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – 4WD Auto Locking Hub (Part No.600-203)
from
$209.99
Our locking hubs are manufactured for affordability and convenience. The high-quality materials ensure long-lasting durability for year after year of service.
Product Features:
See More
Product Features:
- Replacement restores Four-Wheel Drive (4WD) to proper performance
- Replace the part, not the assembly
- Direct fit for ease of installation
- Vehicle try-on testing has been conducted on this part to ensure a trouble-free performance
Pro-King – Differential Rebuild Kit (Part No.718B004)
from
$381.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.
Product Features:
See More
Product Features:
- Contains the highest quality Japanese bearings
Yukon Gear – Zip Locker Front Switch Cover (Part No.34009)
Yukon Gear – Replacement Ring Gear Bolt For Dana S110 – 15/16" Head (Part No.33072)
from
$12.99
Replacement ring gear bolt for Dana S110. 15/16″ head.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer S110
- 5/16″ head
USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 80 In A 4.11 Ratio (Part No.36094)
from
$449.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 11.25″ ring gear diameter
- 37 spline pinion
- 12 ring gear bolts
- 4.11 ratio
Dorman – Front Axle Shaft Kit with Universal Joint, 1541H (Part No.630-434)
from
$466.99
Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box.
Product Features:
See More
Product Features:
- Direct replacement – this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models
- Ready to install – comes pre-assembled for simple installation with no further assembly required
- Durable construction – designed to rigorous standards and tested to ensure performance
- Trustworthy solution – backed by team of engineers and quality control specialists in the United States
Driveworks – Tapered Roller Bearing (Part No.S-HM-88542)
Spicer – Axle Shft Univ Joint (Part No.SPL55-4X)
from
$102.99
Axle Shft Univ Joint
Dorman – Rear Axle Differential Vent (Part No.924-263)
from
$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Felpro – Differential Cover Gasket (Part No.RDS 55447)
from
$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi Purpose Seal (Part No.710701)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)
from
$29.49
Drive Shaft Center Support
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 1480 U-Bolt Kit (Part No.41191)
Motorcraft – 4WD Indicator Lamp S (Part No.J7609673890MTR)
from
$37.78
4WD Indicator Lamp S
Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)
Spicer – Differential Seal (Part No.J7040444357SPI)
from
$67.75
Differential Seal
USA Standard Gear – Pinion Installation Kit For Dana 60 Front (Part No.60016)
from
$275.99
Product Features:
See More
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
National – Bearings (Part No.B-2110)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 2013 Ford F-450 Super Duty Drivetrains Categories
2013 Ford F-450 Super Duty Drivetrains
You count on your 2013 Ford F-450 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 197 Drivetrains ranging in price from $3.29 to $2,400.00, you’re sure to find everything you need for your 2013 Ford F-450 Super Duty.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Valvoline, Moog, and National. 2013 Ford F-450 Super Duty Drivetrains start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,000 extensive product reviews on 2013 Ford F-450 Super Duty Drivetrains. Some of the top-rated Drivetrains products we carry are Solenoid, 4WD Engage And Emissions Purge with 4.1 stars and Greaseable Premium Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2013 Ford F-450 Super Duty below to get started!
Top-Rated Drivetrains Brands For Your 2013 Ford F-450 Super Duty
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Ford F-450 Super Duty running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 2013 Ford F-450 Super Duty back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2013 Ford F-450 Super Duty, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2013 Ford F-450 Super Duty Drivetrains
What are the most purchased Drivetrains for the 2013 Ford F-450 Super Duty?
Out of 197 Drivetrains for the 2013 Ford F-450 Super Duty, the most popular in our inventory are:
What are the top-rated 2013 Ford F-450 Super Duty Drivetrains?
Top-rated Drivetrains for your 2013 Ford F-450 Super Duty based on customer reviews/ratings are:
from
$45.49
(40)
Solenoid, 4WD Engage And Emissions Purge
“Replaced and solenoid with this item exact fit with rain hat works great!!”
