2013 Ford Expedition Heater Hoses
More 2013 Ford Expedition Heater Hoses
Find your specific 2013 Ford Expedition original or aftermarket Heater Hoses below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2013 Ford Expedition Heater Hoses
Motorcraft – Motorcraft Heater Hose (Part No.R3030681254MTR)
from
$123.19
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.
Product Features:
See More
Product Features:
- Ethylene-propylene diolefin monomer (EPDM) rubber reinforced with single rayon-braid tube
- Provides resistance to the damaging effects of coolants, antifreeze and additives
- Stands up to high pressures
- Resists deterioration from heat, aging, ozone and underhood chemicals
- Recommended by Ford Motor Company
Motorcraft – Motorcraft Heater Hose (Part No.R3030428364MTR)
from
$116.04
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.
Product Features:
See More
Product Features:
- Ethylene-propylene diolefin monomer (EPDM) rubber reinforced with single rayon-braid tube
- Provides resistance to the damaging effects of coolants, antifreeze and additives
- Stands up to high pressures
- Resists deterioration from heat, aging, ozone and underhood chemicals
- Recommended by Ford Motor Company
Dorman – Molded Heater Hose: Steel (Part No.626-563)
from
$83.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
Dorman – Molded Heater Hose: Plastic/Rubber, OE Fix, Upgraded Material (Part No.626-585)
from
$91.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability
- Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
- Complete replacement – hoses come with necessary clamps for easy installation
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Molded Heater Hose: Aluminum/Rubber (Part No.626-540)
from
$73.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability
- Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
- Complete replacement – hoses come with necessary clamps for easy installation
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Molded Heater Hose: Rubber (Part No.626-218)
from
$96.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
Gates – Premium Modular Coolant Hose (Part No.22513)
from
$132.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1" Diameter (Part No.E72700)
from
$53.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Motorcraft – Motorcraft Heater Hose (Part No.R3030661301MTR)
from
$43.87
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.
Product Features:
See More
Product Features:
- Ethylene-propylene diolefin monomer (EPDM) rubber reinforced with single rayon-braid tube
- Provides resistance to the damaging effects of coolants, antifreeze and additives
- Stands up to high pressures
- Resists deterioration from heat, aging, ozone and underhood chemicals
- Recommended by Ford Motor Company
Gates – Heater Hose (Part No.R3030359414GAT)
from
$139.36
Heater Hose
Motorcraft – Motorcraft Heater Hose (Part No.R3030681201MTR)
from
$119.50
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.
Product Features:
See More
Product Features:
- Ethylene-propylene diolefin monomer (EPDM) rubber reinforced with single rayon-braid tube
- Provides resistance to the damaging effects of coolants, antifreeze and additives
- Stands up to high pressures
- Resists deterioration from heat, aging, ozone and underhood chemicals
- Recommended by Ford Motor Company
Gates – Premium Modular Coolant Hose (Part No.22538)
from
$97.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Modular Coolant Hose (Part No.22540)
from
$96.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dorman – Molded Heater Hose: Steel (Part No.626-517)
from
$48.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409)
from
$12.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Engine Coolant Hose Clip (Part No.800-807)
from
$31.99
This HVAC heater hose retainer clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC heater hose retainer clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Coolant Fitting (Part No.626-571)
from
$12.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Help – Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (Part No.47164)
from
$14.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Gates – Quick-Lok½ Heater Hose Connector (Part No.28500)
from
$19.49
Product Features:
See More
- Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
- Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
- Fit just as the OEM quick connects for easy installation as well as removal
Dorman – Radiator Hose Clip (Part No.800-808)
from
$17.99
This HVAC heater hose retainer clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC heater hose retainer clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Heater Hose Connecto (Part No.R30361329114DOR)
from
$10.15
Heater Hose Connecto
Dorman – Heater Hose Connector 3/4 x 3/4 (Part No.800-418)
from
$17.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Gates – Quick-Lok½ Heater Hose Connector (Part No.28501)
from
$20.79
Product Features:
See More
- Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
- Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
- Fit just as the OEM quick connects for easy installation as well as removal
Dorman – Heater Hose Connector (Part No.800-404)
from
$15.49
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409HP)
from
$24.49
HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.
Product Features:
See More
Product Features:
- Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
- Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
- Easy to install – matches the original equipment form and dimensions for a simple replacement
- Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life
Popular 2013 Ford Expedition Heater Hoses Categories
2013 Ford Expedition Heater Hoses
Maybe you’re in the middle of a full rebuild of that 2013 Ford Expedition. Maybe you just need a couple of Heater Hoses. Either way, Advance Auto Parts has 15 different Heater Hoses in our inventory ranging from $10.15 to $329.94. That means you can find the exact parts or products you need to keep that 2013 Ford Expedition running smoothly.
Heater Hoses are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2013 Ford Expedition. Dorman, Motorcraft, and Rein are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Heater Hoses for your 2013 Ford Expedition, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Heater Hoses to keep your 2013 Ford Expedition rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Heater Hoses Brands To Make Your 2013 Ford Expedition Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2013 Ford Expedition demands trusted brand parts and products to keep it running. Many trusted brands of Heater Hoses make up Advance Auto Parts’ inventory, and all are ready to help make your Expedition the best it can be. Be sure to browse some of our top Heater Hoses brands and parts.
Popular Dorman Heater Hoses
We carry Dorman parts in our stock across Heater Hose Fittings categories, plus more. For a 2013 Ford Expedition, our most popular Dorman Heater Hoses include:
FAQs for 2013 Ford Expedition Heater Hoses
What are the most purchased Heater Hoses for the 2013 Ford Expedition?
Out of 15 Heater Hoses for the 2013 Ford Expedition, the most popular in our inventory are:
from
$91.99
This product is not rated
Molded Heater Hose: Plastic/Rubber, OE Fix, Upgraded Material
Heater Hoses
