2013 Ford Escape Suspension Parts
Find Your Specific 2013 Ford Escape Suspension Parts
Below you will find various in-demand Ford Suspension Parts, components and accessories for your 2013 Escape. Advance Auto Parts has popular Escape parts like Coil and Leaf Springs, Control Arms, Trailing Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Escape model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2013 Ford Escape Suspension Parts below and start saving instantly.
Popular 2013 Ford Escape Suspension Parts Categories
Essential Suspension Parts for 2013 Ford Escapes
Suncore – Complete Strut Assem (Part No.55S11621)
from
$114.99
Complete Strut Assem
Carquest Premium – Multi-Use Connector (Part No.PTC1876)
from
$46.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Monroe – OESpectrum Suspension Shock Absorber (Part No.37318)
from
$80.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE — Comes with Monroe’s Limited Warranty and exclusive Feel the Difference Guarantee
- 5/8-inch (15.9 mm) diameter piston rod (On most applications)
KYB – Jounce Bumper and Bellows (Part No.SB101)
from
$21.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171594)
from
$253.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference . Visit Monroe.com for details.
MOOG – Rear Upper Suspension Control Arm (Part No.RK643446)
from
$38.49
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Monroe – Strut-Mate Suspension Shock Absorber Mounting Kit (Part No.906981)
from
$37.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
KYB – Strut Mount and Bearing (Part No.SM5815)
from
$69.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Monroe – Strut-Mate Front; Rear Suspension Strut Bumper and Bellows Kit (Part No.63631)
from
$48.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Suncore – Shock Kit (Part No.2-12S252010-001)
from
$69.99
Shock Kit
Rare Parts – Control Arm Bushing (Part No.RP19972)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Rare Parts – Control Arm Bush (Part No.RP19973)
from
$42.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Suncore – Quick Strut Kit (Part No.2-55S11973-001)
from
$264.99
Quick Strut Kit
Dorman – Lateral Arm (Part No.524-181)
from
$64.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Lateral Arm (Part No.524-174)
from
$56.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)
from
$1043.00
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.
Product Features:
See More
Product Features:
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)
from
$703.99
Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.
Product Features:
See More
Product Features:
- The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
- The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
- Easy Installation
Dorman – Suspension Trailing Arm Bushing (Part No.523-069)
from
$34.99
This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Trailing Arm Bushing (Part No.523-067)
from
$39.99
This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)
from
$24.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Strut Bellows (Part No.K90460)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Rare Parts – Strut Mount (Part No.RP18974)
from
$134.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Prevents tire noise and vibration
Monroe – Strut-Mate Suspension Strut Mount (Part No.908961)
from
$87.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
- EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Dorman – Suspension Control Arm (Part No.527-998)
from
$82.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
Dorman – Suspension Control Arm (Part No.528-041)
from
$82.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
Dorman – Suspension Shock Mount (Part No.924-412)
from
$41.99
This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.
Product Features:
See More
Product Features:
- Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
- Complete kit – all necessary mounting hardware is included with each mount
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks
Dorman – Suspension Shock Mount (OE Fix) (Part No.924-412HP)
from
$53.99
The original upper shock mount on certain vehicles is made of aluminum that corrodes and cracks. This Dorman OE FIX replacement features upgraded high-strength steel to prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this replacement shock mount features durable steel to improve upon the original aluminum construction
- Application specific – designed to match the original shock mount on certain Ford, Lincoln and Mazda vehicles
- Hardware included – mount comes with two new nuts for ease of installation
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
- Application specific – designed to match the original shock mount on certain Ford, Lincoln and Mazda vehicles
Upgrade your 2013 Ford Escape with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 2013 Ford Escape, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Suspension Parts are key to keeping your Escape functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Suspension Parts for the 2013 Ford Escape, designed to meet your needs without breaking the bank.
From
Coil and Leaf Spring
replacements to
Control Arms
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2013 Ford Escape at great prices.
Our Suspension Parts inventory for this model
ranges from just $21.99 to $1,043.00, with
an average price of $122.57.
Our 47 Suspension Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2013 Ford Escape without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Ford Escape, we stock popular OEM and aftermarket Suspension Parts from top names
like Monroe Dorman, and more.
Monroe Suspension Parts
start at just $26.99 and boast an impressive 4.4 stars average rating from customers.
With 564 customer reviews and counting, our 2013 Ford Escape Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 Ford Escape is always ready to roll. We’re committed to providing you with everything you need to keep your Escape in top shape, all in one place.
Start shopping confidently below for your 2013 Ford Escape!
Best-Selling Coil and Leaf Springs for 2013 Ford Escapes
Enhance the driving experience in your Ford with 4 quality Coil and Leaf Spring components, starting at $134.99.
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172618)
from
$253.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference . Visit Monroe.com for details.
Suncore – Quick Strut (Part No.55S11973)
from
$134.99
Quick Strut
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-817896)
from
$218.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
- Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
- Springs are built with U.S. grade steel and designed to match factory ride height and performance
- OE quality strut mount, bearing plate and brackets
- Complete strut assembly is extensively tested for functionality and durability
- Built with a micro-smooth, chrome-plated piston rod
Suncore – Quick Strut (Part No.55S11974)
from
$134.99
Quick Strut
Most Popular 2013 Ford Escape Control Arms
Customize your Ford with 16 Control Arms products
like Lower Control Arm Bushings,
Lower Control Arms, and
Lateral Arms, all
priced under $219.99.
Dorman – Lateral Arm (Part No.524-173)
from
$35.49
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Lateral Arm (Part No.524-181)
from
$64.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Suspension Control Arm Bushing (Part No.K201191)
from
$30.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
MOOG – Suspension Control Arm (Part No.RK642951)
from
$91.99
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
- R-Series (RK) products are the right choice for value-driven repair
MOOG – Rear Upper Suspension Control Arm (Part No.RK100002)
from
$141.99
Product Features:
See More
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
- Broad coverage for foreign and domestic applications
Dorman – Lateral Arm (Part No.524-174)
from
$56.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm (Part No.520-046)
from
$84.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm Bushing (Part No.523-623)
from
$75.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Suspension Control Arm (Part No.RK643292)
from
$42.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Rare Parts – Control Arm (Part No.RP71853)
from
$219.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- OE replacement
- Reduces vibration
- Reduces tire wear
Whiteline – Control Arm Upper Arm (Part No.WA402)
from
$67.99
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Whiteline – Control Arm Lower Front Inner And Outer Bushing (Part No.W63320)
from
$67.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Whiteline – Control Arm Lower Front Arm (Part No.WA401)
from
$41.99
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Carquest Premium – Lateral Arm (Part No.800-690355)
from
$38.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
- Pre-installed bushings (when applicable) for easy installation
MOOG – Rear Upper Suspension Control Arm (Part No.RK643446)
from
$38.49
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Whiteline – Control Arm Lower Inner Front Bushing (Part No.W53286)
from
$35.99
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Top Picks for 2013 Ford Escape Trailing Arms
Upgrade Ford Escapes with top-quality Trailing Arms parts, including 4 OEM and aftermarket selections for your 2013 model.
Dorman – Suspension Trailing Arm Bushing (Part No.523-067)
from
$39.99
This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm (Part No.527-998)
from
$82.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
Dorman – Suspension Control Arm (Part No.528-041)
from
$82.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
MOOG – Suspension Trailing Arm Bushing (Part No.K202148)
from
$24.79
Backed by superior materials and rigorous testing, MOOG® trailing arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality materials for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
In-Demand Air Suspension and Kits for 2013 Ford Escapes
Select from 8 premium Air Suspension and Kits parts for your 2013 Ford Escape, with prices ranging from $36.99 to $1,043.00.
Monroe – Strut-Mate Suspension Shock Absorber Mounting Kit (Part No.906981)
from
$37.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Monroe – Strut-Mate Front; Rear Suspension Strut Bumper and Bellows Kit (Part No.63631)
from
$48.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
KYB – Strut Mount and Bearing (Part No.SM5815)
from
$69.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Suncore – Quick Strut Kit (Part No.2-55S11973-001)
from
$264.99
Quick Strut Kit
Suncore – Shock Kit (Part No.2-12S252420-001)
from
$54.99
Shock Kit
Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)
from
$1043.00
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.
Product Features:
See More
Product Features:
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)
from
$703.99
Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.
Product Features:
See More
Product Features:
- The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
- The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
- Easy Installation
Carquest Premium – Multi-Use Connector (Part No.PTC2893)
from
$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Most Sold 2013 Ford Escape Shocks and Struts
Explore our best-selling Ford parts for the 2013 Escape among 15 OEM and aftermarket options starting from $21.99.
Monroe – OESpectrum Suspension Shock Absorber (Part No.39111)
from
$141.99
Providing an exceptional level of handling precision and control, Monroe OESpectrum Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING – Full displaced valving adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE – High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE – High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY – Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- Premium – Limited Warranty
- For Commercial Usage Refer to Product Limited Warranty
Dorman – Suspension Shock Mount (OE Fix) (Part No.924-412HP)
from
$53.99
The original upper shock mount on certain vehicles is made of aluminum that corrodes and cracks. This Dorman OE FIX replacement features upgraded high-strength steel to prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this replacement shock mount features durable steel to improve upon the original aluminum construction
- Application specific – designed to match the original shock mount on certain Ford, Lincoln and Mazda vehicles
- Hardware included – mount comes with two new nuts for ease of installation
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
- Application specific – designed to match the original shock mount on certain Ford, Lincoln and Mazda vehicles
Monroe – Strut-Mate Suspension Strut Mount (Part No.908961)
from
$87.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
- EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Dorman – Suspension Shock Mount (Part No.924-412)
from
$41.99
This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.
Product Features:
See More
Product Features:
- Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
- Complete kit – all necessary mounting hardware is included with each mount
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)
from
$26.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)
from
$24.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
KYB – Jounce Bumper and Bellows (Part No.SB101)
from
$21.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
MOOG – Strut Bellows (Part No.K90460)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Suncore – Gas Shock (Part No.12S252420)
from
$30.99
Gas Shock
KYB – High Pressure Monotube Gas Shock (Part No.553392)
from
$127.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Product Features:
See More
Product Features:
- The Correct, Monotube-Designed Orem Replacement
- The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Ford Escape
- Gas-A-Just Monotubes Are Designed For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172619)
from
$253.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
- ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference . Visit Monroe.com for details.
Monroe – OESpectrum Suspension Strut (Part No.72618)
from
$144.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING – Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE – Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER – Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-817895)
from
$218.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
- Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
- Springs are built with U.S. grade steel and designed to match factory ride height and performance
- OE quality strut mount, bearing plate and brackets
- Complete strut assembly is extensively tested for functionality and durability
- Built with a micro-smooth, chrome-plated piston rod
Monroe – OESpectrum Suspension Strut (Part No.72619)
from
$144.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING – Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE – Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER – Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
Dorman – STRUT BELLOWS (Part No.540-206)
from
$29.99
STRUT BELLOWS
Top-Rated Suspension Parts Brands For Your 2013 Ford Escape
Shop for the best-rated brands offering Suspension Parts and other products for your 2013 Ford Escapes. Below you’ll find some of our best rated Suspension Parts from Monroe and Dorman, and more. Suspension Parts from these brands that fit a 2013 Escape start at just $26.99 and are rated as high as 4.4 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Monroe 2013 Ford Escape Suspension Parts
When it comes to maintaining or upgrading your 2013 Ford Escape, using quality Suspension Parts is essential to ensure durability and a perfect fit. Monroe ticks all of those boxes. We offer a wide selection of Monroe Suspension Parts, specifically designed for the 2013 Ford Escape. With over 3 Monroe brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $26.99, with an average price of just $85.66. Plus, with over 42 customer reviews and an average rating of 4.4 stars, you can trust that our Monroe Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$141.99
(6)
OESpectrum Suspension Shock Absorber
“shocks were on sale for 25% off and so I saved $50 . Was a good buy.”
from
$87.99
(1)
Strut-Mate Suspension Strut Mount
“It works on both right or left. Hope the description said this cause the rud cashier said i should had check before i bought it online.”
from
$26.99
(35)
Shock-Mate Suspension Shock Absorber Bellows
“Used this to replace the torn shock boot on my Goldwing 1500 motorcycle. it fit well, used a tie warp and it was good to go”
Popular Dorman 2013 Ford Escape Suspension Parts
Dorman auto parts is one of the highest quality Suspension Part brands in the market. Any 2013 Ford Escape owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2013 Escape, Advance Auto Parts carries a full inventory of 2 Dorman Suspension Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Suspension Parts range from $41.99 to $53.99, plus, with more than 9 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
FAQs for 2013 Ford Escape Suspension Parts
Which Suspension Parts are best-sellers for 2013 Ford Escapes?
Out of 47 Suspension Parts that fit 2013 Ford Escapes, the following parts are the top sellers:
- OESpectrum Suspension Shock Absorber (10722604) – $141.99
- Strut Bellows (20518181) – $36.99
- Strut-Mate Suspension Shock Absorber Mounting Kit (10188081) – $37.99
What’s the price range for 2013 Ford Escape Suspension Parts?
Suspension Part prices for the 2013 Ford Escape start at $21.99 and go up to $1,043.00 for the most premium parts.
What’s the average price of a Suspension Part for a 2013 Ford Escape?
The average price for Suspension Parts for the 2013 Ford Escape is $122.57. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Ford Escape model years?
What are the cheapest Suspension Parts for my 2013 Ford Escape?
The cheapest 2013 Ford Escape Suspension Parts we carry in stock are:
- Jounce Bumper and Bellows (19170663) – $21.99
- Suspension Trailing Arm Bushing (50182029) – $24.79
- Shock-Mate Suspension Shock Absorber Bellows (5100009) – $24.99
- Shock-Mate Suspension Shock Absorber Bellows (15740047) – $26.99
- STRUT BELLOWS (50227792) – $29.99
What are the top-rated Suspension Parts that fit the 2013 Ford Escape?
Out of 564 reviews by customers, our 2013 Ford Escape Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2013 Ford Escape and their top-rated products:
- Shocks and Struts
- Strut-Mate Suspension Strut Mount (10424151) – $87.99
- OESpectrum Suspension Shock Absorber (10722604) – $141.99
- Suspension Shock Mount (OE Fix) (11776208) – $53.99
What types of Suspension Parts do you sell for my 2013 Ford Escape?
As of 11/2/25, these are some of the most in-demand types of Suspension Parts for a 2013 Ford Escape:
Can I get help with 2013 Ford Escape Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Suspension Parts and more.
What is your return policy for Ford Escape Suspension Parts?
Advance Auto Parts keeps returns simple. For new Ford Escape Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
