2013 Ford E-350 Super Duty Air Intakes
Find Your Specific 2013 Ford E-350 Super Duty Air Intakes
Below you will find various in-demand Ford Air Intakes, components and accessories for your 2013 E-350 Super Duty. Advance Auto Parts has popular E-350 Super Duty parts like Intake Manifold Parts, Throttle Body Parts, Throttle Bodies & Carb Parts and more. You’ll also find aftermarket and OEM Air Intakes for other E-350 Super Duty model years including
2010,
2011,
2012,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2013 Ford E-350 Super Duty Air Intakes below and start saving instantly.
Popular 2013 Ford E-350 Super Duty Air Intakes Categories
Essential Air Intakes for 2013 Ford E-350 Super Duties
Mahle – Thermostat Gasket (Part No.G4031319070MAH)
from
$11.74
The Mahle Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Dorman – Dorman Throttle Body Motor (Part No.C7003426137DOR)
from
$208.17
At long last, replace the throttle body motor without replacing the entire throttle assembly. Conceived of and produced by Dorman, this part significantly cuts repair expenses. Restore throttle control, prevent power loss and inconsistent idle, and keep money in your pocket-all at the same time.
Product Features:
See More
Product Features:
- Includes gaskets for a complete repair
- Combats corrosion and burnout for long-lasting performance
- This part has undergone a rigorous inspection to ensure high quality
- Easy to install
Dorman – Throttle Body Motor (Part No.911-102)
from
$139.99
This throttle body motor is engineered to match the fit, function and performance of the original motor to help restore proper throttle response and engine idling on specified vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this electronic throttle body motor is engineered to match the fit, function and performance of the original throttle body motor on specified vehicle years, makes and models.
- Restores functionality – designed to help restore proper electronic throttle response when the original motor has failed due to internal component damage, leaks or corrosion.
- Durable construction – this motor is made from quality materials and components for reliable service
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 94014-1)
from
$65.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10291-01)
from
$71.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
- It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
- Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 97251)
from
$37.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 94015)
from
$73.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Carquest – Alternator Electrical Connector (Part No.PT5751)
from
$44.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Accelerator Pedal Sensor Connector (Part No.PTA1571)
from
$62.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Accelerator Pedal Sensor Connector (Part No.PTA2957)
from
$101.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Rail Pressure Sensor Connector (Part No.PTA1169)
from
$45.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Continental – Electronic Throttle Body: New, Original Equipment (Part No.ETB10001)
from
$377.99
Continental electronic throttle bodies are the genuine OEM part. Continental sensors are made and manufactured to the highest quality and original equipment specifications. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation. Electronic throttle bodies are essential in optimizing fuel economy and ensure your vehicle is running at peak performance and efficiency.
Product Features:
See More
Product Features:
- The exact OEM part
- Exact form, fit, and function
- Easy installation
- Durable robust design
- Made in ISO certified facilites
Dorman – Electronic Throttle Body: New (Part No.977-584)
from
$329.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.
Product Features:
See More
Product Features:
- Direct replacement – this 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles.
- Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and rough idling.
- Upgraded construction – features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Motorcraft – THROTTLE BODY (Part No.TB-4)
from
$501.99
THROTTLE BODY
Cardone – Electric Throttle Body: Remanufactured (Part No.67-6000)
from
$191.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Product Features:
See More
Product Features:
- Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
- A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
- The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
- Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
- Each unit is guaranteed to function like the original.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Mahle – FI Throttle Body Mou (Part No.C7001295931MAH)
from
$20.01
FI Throttle Body Mou
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61420)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61674)
from
$12.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
MTC – Intake Manifold (Part No.B12002419376MTC)
from
$177.15
Intake Manifold
Autotecnica – Intake Manifold (Part No.FD1414330)
from
$176.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications and covered by an impressive two-year, unlimited mileage warranty, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.
See More
Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-188)
from
$231.99
If you need to swap out the intake manifold on select Ford trucks, SUVs or vans, this proven replacement is the best solution. It’s made in the USA to deliver reliable quality that matches the fit, function and performance of the original. It has several smart features, such as integrated gaskets that sit in the manifold, rather than the carrier gasket design of the factory unit, reducing contact points with the head to help prevent potential air leaks. The complete kit includes the tough polymer manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws. It also has an integrated PCV nipple to ensure proper vacuum, an updated thermostat design to prevent coolant leaks, and a clamp to keep the coolant block off cap in place. Don’t waste money going back to the dealership, and don’t waste time with an aftermarket imitator that isn’t up to the job. Fix your manifold issues with this reliable replacement.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines.
- Made in USA – designed, engineered and manufactured in the United States to deliver consistent quality and precise construction.
- Proven design – features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance
- Complete kit – includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws
Motorcraft – Motorcraft Throttle Position Sensor (Part No.C7012383933MTR)
from
$156.81
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft potentiometers are designed to work with engine control computers in Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Electrical connections are gold-plated to help ensure reliable performance
- Testing is performed in extreme operating conditions to ensure that the potentiometers meet Ford OE specifications
- Designed to perform, even when exposed to fuel, oil, solvents, coolants and brake and transmission fluids
Delphi – Throttle Position Sensor (Part No.SS10387)
from
$45.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi sensors are built to meet or exceed OE requirements and testing
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
- Designed digital output for maximum signal to noise ratio
NTK – Throttle Position Sensor (Part No.TH0098)
from
$42.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.
Carquest Premium – Throttle Sensor (Part No.ECC1233)
from
$87.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Throttle Position Sensor (Part No.ECA1805)
from
$44.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Throttle Position Sensor (Part No.ECC1305)
from
$441.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Motorcraft – Original Equipment (O.E.) Potentiometer – Engine Throttle (Part No.DY-967)
from
$116.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
Product Features:
See More
Product Features:
- Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
- The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
- The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
- Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
- Designed for long service life under harsh under-hood conditions.
- Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
- Designed with OE electrical connectors ensuring proper fits.
Upgrade your 2013 Ford E-350 Super Duty with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 2013 Ford E-350 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Air Intakes are key to keeping your E-350 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Air Intakes for the 2013 Ford E-350 Super Duty, designed to meet your needs without breaking the bank.
From
Intake Manifold Part
replacements to
Throttle Body Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2013 Ford E-350 Super Duty at great prices.
Our Air Intakes inventory for this model
ranges from just $2.49 to $501.99, with
an average price of $159.76.
Our 26 Air Intakes in stock come from 13 trusted brands, so you’re sure to find the right part for your 2013 Ford E-350 Super Duty without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Ford E-350 Super Duty, we stock popular OEM and aftermarket Air Intakes from top names
like Dorman, and more.
Dorman Air Intakes
start at just $65.99 and boast an impressive 4 stars average rating from customers.
With 87 customer reviews and counting, our 2013 Ford E-350 Super Duty Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 Ford E-350 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your E-350 Super Duty in top shape, all in one place.
Start shopping confidently below for your 2013 Ford E-350 Super Duty!
Best-Selling Intake Manifold Parts for 2013 Ford E-350 Super Duties
Enhance the driving experience in your Ford with 6 quality Intake Manifold Part components, starting at $38.99.
Dorman – Upper Intake Manifold Gasket Set: 15 Piece Set (Part No.615-188G)
from
$65.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-188)
from
$231.99
If you need to swap out the intake manifold on select Ford trucks, SUVs or vans, this proven replacement is the best solution. It’s made in the USA to deliver reliable quality that matches the fit, function and performance of the original. It has several smart features, such as integrated gaskets that sit in the manifold, rather than the carrier gasket design of the factory unit, reducing contact points with the head to help prevent potential air leaks. The complete kit includes the tough polymer manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws. It also has an integrated PCV nipple to ensure proper vacuum, an updated thermostat design to prevent coolant leaks, and a clamp to keep the coolant block off cap in place. Don’t waste money going back to the dealership, and don’t waste time with an aftermarket imitator that isn’t up to the job. Fix your manifold issues with this reliable replacement.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines.
- Made in USA – designed, engineered and manufactured in the United States to deliver consistent quality and precise construction.
- Proven design – features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance
- Complete kit – includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 94014-1)
from
$65.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 97200)
from
$38.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
MTC – Intake Manifold (Part No.B12002419376MTC)
from
$177.15
Intake Manifold
Autotecnica – Intake Manifold (Part No.FD1414330)
from
$176.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications and covered by an impressive two-year, unlimited mileage warranty, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.
See More
Most Popular 2013 Ford E-350 Super Duty Throttle Body Parts
Customize your Ford with 10 Throttle Body Parts products
like Throttle Bodies, all
priced under $501.99.
Tech Smart – Fuel Injection Throttle Body (Part No.S20021)
from
$420.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.
Product Features:
See More
Product Features:
- 100% NEW, never remanufactured, which maximizes performance and extends service life
- Undergoes extensive testing to ensure quality and reliability out of the box
- Matches OE response time for peak performance on drive by wire systems
- All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
Motorcraft – THROTTLE BODY (Part No.TB-4)
from
$501.99
THROTTLE BODY
Cardone – FI Throttle Body (Part No.C7000887568CAR)
from
$418.45
CARDONE Remanufactured Throttle Bodies are engineered for quick installation and no comebacks. Typical symptoms of Throttle Body failure include reduced engine power, hesitation, rough idling, stalling, and/or check engine light. Each A1 CARDONE unit is engineered and tested to perform like new. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- On-car vehicle validation testing ensures product fits and functions properly
- Units are disassembled, inspected 100%. Ensures every component is remanufactured, replaced or cleaned as required.
- Cleaning and reman process ensures that the throttle bore surface is not deformed or contaminated to ensure optimum air flow.
- Every unit is 100% computerized tested for motor, throttle position sensor and articulation to ensure quality and reliability
Continental – Electronic Throttle Body: New, Original Equipment (Part No.ETB10001)
from
$377.99
Continental electronic throttle bodies are the genuine OEM part. Continental sensors are made and manufactured to the highest quality and original equipment specifications. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation. Electronic throttle bodies are essential in optimizing fuel economy and ensure your vehicle is running at peak performance and efficiency.
Product Features:
See More
Product Features:
- The exact OEM part
- Exact form, fit, and function
- Easy installation
- Durable robust design
- Made in ISO certified facilites
Dorman – Electronic Throttle Body: New (Part No.977-584)
from
$329.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.
Product Features:
See More
Product Features:
- Direct replacement – this 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles.
- Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and rough idling.
- Upgraded construction – features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Hitachi – Electronic Throttle Body: New (Part No.ETB0042)
from
$247.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.
Product Features:
See More
Product Features:
- Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
- Hitachi is a Tier 1 OE supplier for Throttle bodies
- 100% NEW, never remanufactured
- Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
- These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
- Powerful electric motor provides quick and accurate response for optimal engine efficiency
- Electronics are sealed to prevent contamination that may result in inaccurate readings
- Detailed manufacturing tracking system using QR codes
Cardone New – New Fuel Injection Throttle Body (Part No.6E-6000)
from
$246.99
All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
Product Features:
See More
Product Features:
- Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
- Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
- 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
- Each unit is guaranteed to fit and function like the original.
Dorman – THROTTLE BODY UNIT (Part No.977-160)
from
$245.99
Original equipment throttle bodies often fail when moisture and oil intrusion foul the internal electronics. This Dorman OE FIX throttle body features Dorman Sensor Shield technology, a proprietary butterfly shaft seal to prevent future failures from this contamination.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a proprietary Sensor Shield butterfly shaft seal to prevent future failures.
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
Cardone – Electric Throttle Body: Remanufactured (Part No.67-6000)
from
$191.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Product Features:
See More
Product Features:
- Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
- A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
- The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
- Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
- Each unit is guaranteed to function like the original.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Worldpac – FI THROTTLE BODY (Part No.C7000415015MTR)
from
$172.55
FI THROTTLE BODY
Top Picks for 2013 Ford E-350 Super Duty Throttle Bodies & Carb Parts
Upgrade Ford E-350 Super Duties with top-quality Throttle Bodies & Carb Parts parts, including 10 OEM and aftermarket selections for your 2013 model.
Carquest Premium – Throttle Position Sensor w/ Hardware (Part No.ECC1014)
from
$79.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Throttle Position Sensor (Part No.TH0262)
from
$89.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.
Carquest Premium – Fuel Rail Pressure Sensor Connector (Part No.PTA1169)
from
$45.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Mahle – Thermostat Gasket (Part No.G4031319070MAH)
from
$11.74
The Mahle Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Throttle Sensor (Part No.ECC1233)
from
$87.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61420)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Dorman Throttle Body Motor (Part No.C7003426137DOR)
from
$208.17
At long last, replace the throttle body motor without replacing the entire throttle assembly. Conceived of and produced by Dorman, this part significantly cuts repair expenses. Restore throttle control, prevent power loss and inconsistent idle, and keep money in your pocket-all at the same time.
Product Features:
See More
Product Features:
- Includes gaskets for a complete repair
- Combats corrosion and burnout for long-lasting performance
- This part has undergone a rigorous inspection to ensure high quality
- Easy to install
Mahle – FI Throttle Body Mou (Part No.C7001295931MAH)
from
$20.01
FI Throttle Body Mou
Motorcraft – Motorcraft Throttle Position Sensor (Part No.C7012383933MTR)
from
$156.81
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft potentiometers are designed to work with engine control computers in Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Electrical connections are gold-plated to help ensure reliable performance
- Testing is performed in extreme operating conditions to ensure that the potentiometers meet Ford OE specifications
- Designed to perform, even when exposed to fuel, oil, solvents, coolants and brake and transmission fluids
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61674)
from
$12.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Top-Rated Air Intakes Brands For Your 2013 Ford E-350 Super Duty
Shop for the best-rated brands offering Air Intakes and other products for your 2013 Ford E-350 Super Duties. Below you’ll find some of our best rated Air Intakes from Dorman, and more. Air Intakes from these brands that fit a 2013 E-350 Super Duty start at just $65.99 and are rated as high as 4 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 2013 Ford E-350 Super Duty Air Intakes
When it comes to maintaining or upgrading your 2013 Ford E-350 Super Duty, using quality Air Intakes is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Air Intakes, specifically designed for the 2013 Ford E-350 Super Duty. With over 5 Dorman brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $65.99, with an average price of just $216.43. Plus, with over 29 customer reviews and an average rating of 4 stars, you can trust that our Dorman Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2013 Ford E-350 Super Duty Air Intakes
Which Air Intakes are best-sellers for 2013 Ford E-350 Super Duties?
Out of 26 Air Intakes that fit 2013 Ford E-350 Super Duties, the following parts are the top sellers:
- Throttle Position Sensor w/ Hardware (12424476) – $79.99
- Engine Intake Manifold Gasket Set (15780746) – $65.99
- Throttle Position Sensor (12223103) – $89.99
What’s the price range for 2013 Ford E-350 Super Duty Air Intakes?
Air Intake prices for the 2013 Ford E-350 Super Duty start at $2.49 and go up to $501.99 for the most premium parts.
What’s the average price of a Air Intake for a 2013 Ford E-350 Super Duty?
The average price for Air Intakes for the 2013 Ford E-350 Super Duty is $159.76. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Ford E-350 Super Duty model years?
What are the cheapest Air Intakes for my 2013 Ford E-350 Super Duty?
The cheapest 2013 Ford E-350 Super Duty Air Intakes we carry in stock are:
- Fuel Injection Throttle Body Mounting Gasket (20780049) – $2.49
- Thermostat Gasket (11974711) – $11.74
- Fuel Injection Throttle Body Mounting Gasket (11138787) – $12.29
- FI Throttle Body Mou (11647457) – $20.01
- INTAKE MANIFOLD GASKET SET (11138842) – $38.99
What are the top-rated Air Intakes that fit the 2013 Ford E-350 Super Duty?
Out of 87 reviews by customers, our 2013 Ford E-350 Super Duty Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2013 Ford E-350 Super Duty and their top-rated products:
- Intake Manifold Parts
- Upper Intake Manifold Gasket Set: 15 Piece Set (10055016) – $65.99
- Plastic Intake Manifold – Includes Gaskets (10016210) – $231.99
What types of Air Intakes do you sell for my 2013 Ford E-350 Super Duty?
As of 2/5/25, these are some of the most in-demand types of Air Intakes for a 2013 Ford E-350 Super Duty:
Can I get help with 2013 Ford E-350 Super Duty Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Air Intakes and more.
What is your return policy for Ford E-350 Super Duty Air Intakes?
Advance Auto Parts keeps returns simple. For new Ford E-350 Super Duty Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
