2013 Ford E-250 Suspension Parts

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

• KYB Recommended Orem Replacement Shock
• The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Ford Van
• The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
• Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
• KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

• DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
• BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

• KYB Recommended Orem Replacement Shock
• The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Full-Size Ford Truck
• The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
• Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
• KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Reduces road noise
• UV resistant
• No Squeak

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Protects spring and spring seat from damage
• Replacement helps to reduce noise
• Includes insulator and bearing

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Reduces road noise
• UV resistant
• No Squeak

Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:

• Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
• Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
• Excellent value – original equipment quality at a lower price
• Ready to install – all essential hardware is included for an easy installation

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

This leaf spring hanger is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this leaf spring hanger is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this hanger is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Max Performance Synthetic Power Steering Fluid