2013 Dodge Dart Clutch Systems
Find Your Specific 2013 Dodge Dart Clutch Systems
Below you will find various in-demand Dodge Clutch Systems, components and accessories for your 2013 Dart. Advance Auto Parts has popular Dart parts like Clutch Release Bearings, Clutch Slave Cylinders, Flywheels and more. You’ll also find aftermarket and OEM Clutch Systems for other Dart model years including
1971,
1972,
1973,
1974,
1975,
1976,
2014,
2015,
2016 and more. Select a category of 2013 Dodge Dart Clutch Systems below and start saving instantly.
Popular 2013 Dodge Dart Clutch Systems Categories
Essential Clutch Systems for 2013 Dodge Darts
ATP – Automatic Transmission Flex Plate (Part No.Z-196)
from
$14.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
LuK – OE Quality Dual Mass Flywheel (Part No.DMF188)
from
$546.99
LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More
ATP – Automatic Transmission Flex Plate (Part No.Z-201)
from
$26.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Power Train (Part No.11-430)
from
$545.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
ATP – Automatic Transmission Flex Plate (Part No.Z-197)
from
$21.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Automatic Transmission Flex Plate (Part No.Z-195)
from
$13.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
LuK – OE Quality Dual Mass Flywheel (Part No.DMF166)
from
$907.99
LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More
Hays – Sfi Flexplate:Sbm/Bbm: 10/11-1/8 In. C (Part No.11-020)
from
$114.99
Sfi Flexplate:Sbm/Bbm: 10/11-1/8 In. C
LUK – Flywheel (Part No.I1000659225LUK)
from
$650.20
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
LuK – Clutch Slave Cylinder (Part No.LSC640)
from
$191.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Worldpac – REL BRG/SLAVE CYL. A (Part No.I2021476640FTE)
from
$447.07
REL BRG/SLAVE CYL. A
Upgrade your 2013 Dodge Dart with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 2013 Dodge Dart, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Clutch Systems are key to keeping your Dart functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Clutch Systems for the 2013 Dodge Dart, designed to meet your needs without breaking the bank.
From
Clutch Release Bearing
replacements to
Clutch Slave Cylinders
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 2013 Dodge Dart at great prices.
Our Clutch Systems inventory for this model
ranges from just $191.99 to $907.99, with
an average price of $462.85.
Our 5 Clutch Systems in stock come from 2 trusted brands, so you’re sure to find the right part for your 2013 Dodge Dart without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 Dodge Dart is always ready to roll. We’re committed to providing you with everything you need to keep your Dart in top shape, all in one place.
Start shopping confidently below for your 2013 Dodge Dart!
Best-Selling Clutch Release Bearings for 2013 Dodge Darts
Enhance the driving experience in your Dodge with 1 quality Clutch Release Bearing components, starting at $447.07.
Worldpac – REL BRG/SLAVE CYL. A (Part No.I2021476640FTE)
from
$447.07
REL BRG/SLAVE CYL. A
Most Popular 2013 Dodge Dart Clutch Slave Cylinders
Customize your Dodge with 1 Clutch Slave Cylinders products
like Clutch Slave Cylinders, all
priced under $191.99.
LuK – Clutch Slave Cylinder (Part No.LSC640)
from
$191.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Top Picks for 2013 Dodge Dart Flywheels
Upgrade Dodge Darts with top-quality Flywheels parts, including 3 OEM and aftermarket selections for your 2013 model.
LuK – OE Quality Dual Mass Flywheel (Part No.DMF166)
from
$907.99
LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More
LUK – Flywheel (Part No.I1000659225LUK)
from
$650.20
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
LuK – OE Quality Dual Mass Flywheel (Part No.DMF188)
from
$546.99
LuK: Don’t gamble – stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More
FAQs for 2013 Dodge Dart Clutch Systems
Which Clutch Systems are best-sellers for 2013 Dodge Darts?
Out of 5 Clutch Systems that fit 2013 Dodge Darts, the following parts are the top sellers:
- Clutch Slave Cylinder (12241574) – $191.99
- REL BRG/SLAVE CYL. A (50086286) – $447.07
- Flywheel (11999880) – $650.20
What’s the price range for 2013 Dodge Dart Clutch Systems?
Clutch System prices for the 2013 Dodge Dart start at $191.99 and go up to $907.99 for the most premium parts.
What’s the average price of a Clutch System for a 2013 Dodge Dart?
The average price for Clutch Systems for the 2013 Dodge Dart is $462.85. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other Dodge Dart model years?
What are the cheapest Clutch Systems for my 2013 Dodge Dart?
The cheapest 2013 Dodge Dart Clutch Systems we carry in stock are:
- Clutch Slave Cylinder (12241574) – $191.99
- REL BRG/SLAVE CYL. A (50086286) – $447.07
- OE Quality Dual Mass Flywheel (12243254) – $546.99
- Flywheel (11999880) – $650.20
- OE Quality Dual Mass Flywheel (12243375) – $907.99
What types of Clutch Systems do you sell for my 2013 Dodge Dart?
As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 2013 Dodge Dart:
Can I get help with 2013 Dodge Dart Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Clutch Systems and more.
What is your return policy for Dodge Dart Clutch Systems?
Advance Auto Parts keeps returns simple. For new Dodge Dart Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
