2013 Dodge Challenger Drivetrains

Essential 2013 Dodge Challenger Drivetrains

Yukon Gear – 8.75" Chrysler Outer Axle Seal, Use With Set7 (Part No.30199)

8.75" Chrysler Outer Axle Seal, Use With Set7

from

$15.99
8.75″ Chrysler outer axle seal, use w/set7.Yukon Mighty seal.

Product Features:
  • Rear outer axle seal
  • Fits Chrysler 8.75″ rear
  • Tapered rolling bearing design only
See More

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.

from

$3.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Tapered Roller Bearing (Part No.S-25520)

Tapered Roller Bearing

from

$3.99
Product Features:
  • Brand may vary by location
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.986-220)

Rear Drive Shaft: Adjustable

from

$847.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6067)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$125.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHRY 05-14; DODGE 05-14;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2005-2014
  • Weight approx: 1 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 3.50 INCH / 89 MM
  • MOUNT WIDTH: 7.38 INCH / 187 MM
  • STYLE: TRADITIONAL
  • ELEVATED MOUNTING PLATFORM
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Tapered Roller Bearing

from

$6.79
Product Features:
  • Brand may vary by location
See More

Energy Suspension – DiffrlBushing (Part No.5.1115G)

DiffrlBushing

from

$81.99
DiffrlBushing

National – Shaft Repair Sleeve (Part No.99106)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-803146)

Tapered Roller Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Flange Yoke For Chrysler 9.25" (Part No.41012)

Flange Yoke For Chrysler 9.25"

from

$263.99
Yukon flange yoke for Chrysler 9.25″. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 9.25″ rear
  • 29 spline
  • Round companion flange
See More

Carquest Premium – CV Axle Shaft Assembly NCV479097: Front Right (Part No.NCV479097)

CV Axle Shaft Assembly NCV479097: Front Right

from

$115.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Pinion Seal For Chrysler 8.75" 42 Housing (Part No.30171)

Pinion Seal For Chrysler 8.75" 42 Housing

from

$53.99
Pinion seal for Chrysler 8.75″ 42 housing.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Chrysler 8.75″ with ’42’ case housing
See More

Dorman – Axle Spindle Nut (Part No.K4030222225DOR)

Axle Spindle Nut

from

$27.53
Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Conveniently available in many styles and in packs of different quantities
  • Dorman’s Spindle Nuts are constructed to strict engineering quality standards
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.7412S)

Multi Purpose Seal

from

$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$12.79
Product Features:
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
  • Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
  • Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Dorman – Driveshaft Flex Coupler (Part No.935-407)

Driveshaft Flex Coupler

from

$161.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
  • Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006704682DOR)

OE Solutions Driveshaft Flex Joint Coupler

from

$208.21
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:
  • Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
  • Comes with bolts and washers (where applicable)
  • Easy to install
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

National – Shaft Repair Sleeve (Part No.99168)

Shaft Repair Sleeve

from

$36.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

Taper Bearing Cone

from

$19.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.LM67048)

Bearings

from

$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – C198 Ring Gear Bolt (Part No.33069)

C198 Ring Gear Bolt

from

$12.99
C198 ring gear bolt.

Product Features:
  • Ring gear bolt
  • Fits Chrysler C198
See More

Yukon Gear – Ring Gear Bolt For Chrysler 9.25" Rear (Part No.33033)

Ring Gear Bolt For Chrysler 9.25" Rear

from

$9.99
Ring gear bolt for Chrysler 9.25″ rear, 7/16″ x 18.

Product Features:
  • Ring gear bolt for Chrysler 9.25″ rear
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

2013 Dodge Challenger Drivetrains

You count on your 2013 Dodge Challenger to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 42 Drivetrains ranging in price from $3.99 to $1,055.99, you’re sure to find everything you need for your 2013 Dodge Challenger.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 8 different brands like Yukon Gear, National, and Dorman. 2013 Dodge Challenger Drivetrains start as low as $3.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 44 extensive product reviews on 2013 Dodge Challenger Drivetrains. Some of the top-rated Drivetrains products we carry are Axle Spindle Nut with 5.0 stars and Center Support Bearing with 5.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2013 Dodge Challenger below to get started!

Top-Rated Drivetrains Brands For Your 2013 Dodge Challenger

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Dodge Challenger running right for years to come. In our inventory you’ll find brands like Yukon Gear, National, Dorman, and even more.

Popular Anchor Drivetrains

You’ll find popular Anchor brand products across Drive Shafts and Axles. All are waiting to get your 2013 Dodge Challenger back on the road. Some of the top-rated Anchor products in these categories are:
Center Support Bearing Motor Mount: Center, 1 Piece
from $125.99
(1)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings

Top-Rated National Drivetrains


If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 2013 Dodge Challenger, and some of our most reviewed National parts include:
Bearings
from $14.79
(3)
Bearings
Drive Shaft Bearings
Multi Purpose Seal
from $14.29
(3)
Multi Purpose Seal
Input Shaft Seals
Taper Bearing Cup
from $10.99
(1)
Taper Bearing Cup
Drive Shaft Bearings

FAQs for 2013 Dodge Challenger Drivetrains

What are the most purchased Drivetrains for the 2013 Dodge Challenger?

Out of 42 Drivetrains for the 2013 Dodge Challenger, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Spindle Nut with Plastic Insert - M24-2.0 (sold by each)
from $14.99
This product is not rated
Spindle Nut with Plastic Insert – M24-2.0 (sold by each)
Spindle Lock Nuts
Bearings
from $25.49
This product is not rated
Bearings
Differential Pinion Pilot Bearings

What are the top-rated 2013 Dodge Challenger Drivetrains?

Top-rated Drivetrains for your 2013 Dodge Challenger based on customer reviews/ratings are:
Axle Spindle Nut
from $27.53
(1)
Axle Spindle Nut
“Just what I was looking for”
Center Support Bearing
from $111.99
(1)
Center Support Bearing
“Great service from Pell City, AL store.”