2013 Chevrolet Suburban 2500 Drivetrains

Essential 2013 Chevrolet Suburban 2500 Drivetrains

Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)

U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM

from

$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.

Product Features:
  • u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
See More

National – Bearings (Part No.FC-66561)

Bearings

from

$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Pinion Install Kit For ’98 & Up GM 9.5" Differential (Part No.13076)

Pinion Install Kit For '98 & Up GM 9.5" Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1998 and up GM 9.5″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

TCaseShiftForkInsert

from

$11.99
TCaseShiftForkInsert

Cardone – Transfer Case Motor (Part No.48-104)

Transfer Case Motor

from

$185.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:
  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
See More

Driveworks – Differential Pinion Seal (Part No.S-710508)

Differential Pinion Seal

from

$26.99
Product Features:
  • Brand may vary by location
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)

Differential Carrier Gear Kit

from

$176.99


Product Features:
  • GM9.5″ INTERNAL KIT (OPEN) 33 SPL. FRONT & REAR
See More

Pro-King – Differential Pinion Gear Washer (Part No.744A216)

Differential Pinion Gear Washer

from

$3.19
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Differential Cover B (Part No.33569)

Differential Cover B

from

$5.99
Differential Cover B

Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

Super Carrier Shim Kit For GM 9.5"

from

$29.99
9.5″ GM differential carrier Supershim kit.

Product Features:
  • Super carrier shim kit for GM 9.5″
  • Interlocking design makes installation much easier
See More

Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)

Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal

from

$24.99
Product Features:
  • Fits GM 8.6″ and 9.5″
  • Sleeve to adapt standard yoke to use late model triple lip pinion seal
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS

from

$23.99
Product Features:
  • Cross pin bolt
  • Fits GM 9.5″ and 9.25″ IFS
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Motive Gear – Differential Carrier (Part No.6258340)

Differential Carrier

from

$205.99


Product Features:
  • GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP
See More

Pro-King – Differential Pinion Nut (Part No.744A961)

Differential Pinion Nut

from

$10.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

DiffrlPinSupportBolt

from

$5.99
DiffrlPinSupportBolt

Yukon Gear – GM Side Gear Spacer Sleeve For GM 9.25" IFS (Part No.33533)

GM Side Gear Spacer Sleeve For GM 9.25" IFS

from

$40.99
Product Features:
  • Side gear spacer sleeve
  • Fits GM 9.25″ IFS
See More

Driveworks – Tapered Roller Bearing (Part No.S-A-42)

Tapered Roller Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.HM803146)

Bearings

from

$47.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Axle Shaft Seal (Part No.710926)

Axle Shaft Seal

from

$89.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Pinion Yoke For ’10 & Up GM 14 Bolt Truck, Express Van Only (Part No.41204)

Pinion Yoke For '10 & Up GM 14 Bolt Truck, Express Van Only

from

$294.99
Yukon pinion yoke for ’10 & up GM 14 bolt truck, Express van only.

Product Features:
  • Fits GM 10.5″ 14 bolt truck in Express van
  • 30 spline
  • 1485 U-Joint size
See More

Motive Gear – Differential Gear Install Kit (Part No.GM9.2IKFL)

Differential Gear Install Kit

from

$52.99


Product Features:
  • MINI INSTALL KIT GM9.2IFS 98 & ON
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

Yukon Gear – Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33362)

Left Hand Carrier Bearing Adjuster For 9.25" GM IFS

from

$98.99
Left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:
  • Side adjuster
  • Fits 2010 and down GM 9.25″ IFS
  • Left hand side
See More

Yukon Gear – GM 9.25" IFS Side Adjuster, ’11 & Up (Part No.33358)

GM 9.25" IFS Side Adjuster, '11 & Up

from

$115.99
9.25IFS GM 11 & up side bearing adjuster.

Product Features:
  • Side adjuster
  • Fits 2011 and up GM 9.25″ IFS
See More

Motive Gear – Differential Crush Sleeve (Part No.26008741)

Differential Crush Sleeve

from

$12.99


Product Features:
  • CRUSH SLEEVE 14 BOLT 10.5 (3124) 1989 UP MIN ORDER 1000
See More

Motive Gear – Differential Crush Sleeve (Part No.14012691)

Differential Crush Sleeve

from

$2.99


Product Features:
  • CRUSH SLEEVE 9.5 GM 14BLT MIN ORDER 1000
See More

Popular 2013 Chevrolet Suburban 2500 Drivetrains Categories

2013 Chevrolet Suburban 2500 Drivetrains

You count on your 2013 Chevrolet Suburban 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 277 Drivetrains ranging in price from $2.99 to $2,158.99, you’re sure to find everything you need for your 2013 Chevrolet Suburban 2500.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 25 different brands like Valvoline, Moog, and Driveworks. 2013 Chevrolet Suburban 2500 Drivetrains start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,364 extensive product reviews on 2013 Chevrolet Suburban 2500 Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Greaseable Super Strength Universal Joint with 4.2 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2013 Chevrolet Suburban 2500 below to get started!

Top-Rated Drivetrains Brands For Your 2013 Chevrolet Suburban 2500

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Chevrolet Suburban 2500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Powertrax Drivetrains

You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 2013 Chevrolet Suburban 2500 back on the road. Some of the top-rated Powertrax products in these categories are:
Grip LS Traction System
from $503.99
(1)
Grip LS Traction System
Differential Open Unit and Components

FAQs for 2013 Chevrolet Suburban 2500 Drivetrains

What are the most purchased Drivetrains for the 2013 Chevrolet Suburban 2500?

Out of 277 Drivetrains for the 2013 Chevrolet Suburban 2500, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $26.99
(89)
Greaseable Premium Universal Joint
U-Joints
CV Axle Shaft Assembly
from $134.99
(49)
CV Axle Shaft Assembly
Drive Shaft and Axles
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints

What are the top-rated 2013 Chevrolet Suburban 2500 Drivetrains?

Top-rated Drivetrains for your 2013 Chevrolet Suburban 2500 based on customer reviews/ratings are:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
“good price”
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
4WD Actuator, Front Axle
from $104.99
(47)
4WD Actuator, Front Axle
“Fits perfect and functions perfect.”