2013 Chevrolet Silverado 3500 HD Exhaust System Kits

This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
• Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
• Application specific – designed for a wide range of vehicle years, makes and models
• This part has undergone vehicle try-on testing for conformance to product standards and quality

The MagnaFlow PRO DPF Series 17870 utilizes it’s weight-optimized, durable, corrosion resistant stainless steel design to enhance your truck with MagnaFlow¿s signature sound and dyno-tested performance. 17870¿s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17870 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow¿s limited lifetime warranty.

Product Features:

• Throaty, powerful performance sound Magnaflow is famous for
• Attention grabbing design thanks to an aggressive style
• Intercooled tips

Interested in a new exhaust system for your LML Duramax? Check out the Large Bore-HD DPF-Back exhaust system by aFe. This system is constructed from 5″ mandrel-bent 409 stainless steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included in this exhaust system is a massive 6″ wrinkle-black powder-coated 304 stainless steel tip with a laser-cut stainless steel aFe power badge. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This Large Bore-HD exhaust system is constructed of 5″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. 6″ Diameter Polished Intercooled Tip: Finishing off the exhaust is a 6″ diameter, high luster polished, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent Tubing For Maximum Flow
• Hassle Free Installation
• High Quality Band Clamps For Leak-Free Seal
• Smooth Transition Bends Allows For Low Turbulence

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• DPF/CAT-Delete
• No Bungs
• Includes Flange

Interested in a new exhaust system for your LML Duramax? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5″ mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included in this exhaust system is a massive 6″ diameter, wrinkle-black powder-coated 304 stainless steel tip with a laser-cut stainless steel aFe power badge. ATLAS exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 5″ mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. 6″ Diameter Black Intercooled Tip: Finishing off the exhaust is a 6″ diameter, black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent Tubing For Maximum Flow
• Utilizes Factory Mounting Locations
• Quick Hassle Free Installation
• Massive Intercooled Tip w/Laser Cut aFe Power Badge

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• 7 in. Polished Tips w/Laser Cut Age Badge
• Increased Flow And Performance
• High Quality Band Clamps

Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This exhaust system is constructed of 4″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. 5″ Diameter Polished Intercooled Tips: Finishing off the exhaust are 5″ diameter, polished, stainless steel straight cut tips with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style. **Cutting stock exhaust is required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations For A Quick Hassle Free Installation

Built to Perform MBRPs performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your vehicle. Every system we sell has been built to the most exacting standards in the industry.

Product Features:

• Aluminized Stainless Steel
• Moderate Sound Level
• 4 Inch Mandrel Bent Tubing
• 4 Inch Cat Back Single Side Exit (Street Version) Exhaust System
• Limited 3 Year Warranty

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, toque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included in this exhaust system is a massive 7 in. wrinkle-black powder-coated tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. ATLAS exhaust systems are the perfect combination of performance, fit and value. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Interested in a new exhaust system for your L5P Duramax? Check out the ATLAS dual DPF-Back exhaust system by aFe. This system is constructed from 4″ mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations and comes with a bolt-on bracket that supports the driver side tailpipe. This provides for a quick, hassle-free installation with no modification necessary. Also included in this exhaust system are dual massive 6″ polished 304 stainless steel tips with laser-cut stainless steel aFe power badges. ATLAS exhaust systems are the perfect combination of performance, fit and value. Single To Dual Exhaust Conversion: This exhaust is designed to convert the standard single exhaust into an aggressive dual exhaust. Fits With Spare Tire: This exhaust system fits perfectly without relocating the spare tire. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 4″ mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. Dual Massive 6″ Black Tips: Finishing off the exhaust are dual powder-coated high temp black 304 stainless steel exhaust tips. This tip features a laser-cut stainless steel aFe power badge for an aggressive style.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold center on specified GM and Hummer vehicles
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance
• Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
• Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold on the front left or rear right on specified GM and Isuzu vehicles
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience