2013 Chevrolet Silverado 1500 Steering and Chassis Parts
More 2013 Chevrolet Silverado 1500 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2013 Chevrolet Silverado 1500, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2013 Chevrolet Silverado 1500 Steering and Chassis Parts
Driveworks – Tie Rod End (Part No.DW-ES3488)
from
$46.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
PWR – New Hydraulic Power Rack and Pinion (Part No.42-2985)
from
$1046.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Mounting Bracket, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Dorman – Rack and Pinion Bushing (Part No.523-267)
from
$70.99
When the original rack and pinion mount bushings fail on certain GM vehicles, you traditionally have to replace the entire steering rack. This Dorman OE FIX solution provides two bushings and a bracket for replacing only the worn bushings.
Product Features:
See More
Product Features:
- Rack And Pinion Bushing
- Rack and Pinion Bushing
- When the original rack and pinion mount bushings fail on certain GM vehicles, you traditionally have to replace the entire steering rack. This Dorman OE FIX solution provides two bushings and a bracket for replacing only the worn bushings.
- Cost-effective repair – this set of rack and pinion mount bushings allows direct replacement of failed bushings
- Application specific – made to directly replace suspension steering rack bushings on certain Cadillac, Chevy and GMC vehicles
Belltech – Camber Adjustment, With 4 Control Arm Bushings (Part No.4955)
from
$98.99
If more adjustment for proper rear driveline angle is required, then our driveline alignment kits are your solution. A combination of driveshaft spacers, Pinion Shim Kit, center carrier bearing kit. Belltech driveline alignment kits can help make your driveline problems are a thing of the past
Product Features:
See More
Product Features:
- Engineered Application Specific Aluminum Spacers Allow For Angle Correction Of The Driveshaft
- Two Wedge Shaped Shims With Ranges From 1 To 6 Degrees New Spring Center Bolts And Nuts
- Adjustable Bracketry That Allows For Fine Tuning Of The Carrier Bearing Position To Your Vehicles Specific Needs
- Combination Of Driveshaft Spacers, Pinion Shim Kit, Center Carrier Bearing Kit
Dorman – Power Steering Cooler (Part No.918-301)
from
$111.99
This power steering cooler is designed to match the fit and function of the original cooler on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering cooler is designed to match the fit and function of the original cooler on specified vehicles
- Ideal solution – this power steering cooler is a reliable replacement for a failed original cooler
- Durable construction – made from quality, corrosion-resistant components to ensure reliable performance and long service life
- Trustworthy quality – backed by a team of product engineers based in the United States
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
MOOG – Alignment Guide Pin, sold by each (Part No.K6716)
from
$2.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Replaces broken OEM pins
- Box of 12
MOOG – Caster / Camber Kit (Part No.K100421)
from
$93.99
Caster / Camber Kit
National – Bearings (Part No.DB-53313)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Return Line Hose Assembly (Part No.40558)
from
$49.49
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
MOOG – Caster/Camber Adjusting Kit (Part No.K100159)
from
$72.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Driveworks – Ball Joint (Part No.DW-K6541)
from
$62.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Powercraft – Rack Pinion Seal Kit (Part No.8787)
from
$87.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – 3/8 Cap Seal – .370 (Part No.70018)
from
$30.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More
MOOG – Camber/Caster Adjusting Plate (Part No.K80277)
from
$7.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Problem Solver Quick Cam replaces the nonadjustable outboard OEM cam
- Quick Cam camber adjustment range from negative 2.2 to positive 2.5 Degrees
- Easy access Allen wrench slot enables fast and easy caster/camber adjustment
- Quick Cam works with the OEM bolt, significantly reducing installation time
Dorman – Right Steering Knuckle (Part No.697-906)
from
$265.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Driveworks – Sway Bar Link Kit (Part No.DW-K80631)
from
$18.29
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
Dorman – Lower Steering Shaft (Part No.425-130)
from
$378.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
MOOG – Rack & Pinion Bellows Kit (Part No.K150419)
from
$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
- QUIET DRIVE — Replacement can reduce front end noise
Dorman – Suspension Stabilizer Bar (Part No.927-120)
from
$292.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Driveworks – Ball Joint (Part No.DW-K6696)
from
$34.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
MOOG – Tie Rod End (Part No.ES800519)
from
$69.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Stab Bar Bushing Kit (Part No.K202000)
from
$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Natural rubber material with synthetic fabric lining
- Split design allows for easier installation
- Replacement can reduce front end noise
- Restores like-new steering and handling
- Bushings engineered for long life and dependability
- Incorporates proven design and engineering features
Energy Suspension – Sway Bar Bushing Set (Part No.3.5213G)
from
$58.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Popular 2013 Chevrolet Silverado 1500 Steering and Chassis Parts Categories
2013 Chevrolet Silverado 1500 Steering and Chassis Parts
You count on your 2013 Chevrolet Silverado 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 116 Steering and Chassis Parts ranging in price from $2.99 to $1,046.99, you’re sure to find everything you need for your 2013 Chevrolet Silverado 1500.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 17 different brands like Moog, Driveworks, and Carquest Premium. 2013 Chevrolet Silverado 1500 Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 12,050 extensive product reviews on 2013 Chevrolet Silverado 1500 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Power Steering Filter with 3.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2013 Chevrolet Silverado 1500 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2013 Chevrolet Silverado 1500
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Chevrolet Silverado 1500 running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, Carquest Premium, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Camber Kits and Sway Bars. All are waiting to get your 2013 Chevrolet Silverado 1500 back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated MOOG Steering and Chassis Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Steering and Chassis Parts for your 2013 Chevrolet Silverado 1500, and some of our most reviewed MOOG parts include:
FAQs for 2013 Chevrolet Silverado 1500 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2013 Chevrolet Silverado 1500?
Out of 116 Steering and Chassis Parts for the 2013 Chevrolet Silverado 1500, the most popular in our inventory are:
What are the top-rated 2013 Chevrolet Silverado 1500 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2013 Chevrolet Silverado 1500 based on customer reviews/ratings are:
