2013 Chevrolet Express 3500 Drivetrains

Essential 2013 Chevrolet Express 3500 Drivetrains

Pro-King – Differential Axle Seal (Part No.744A074)

Differential Axle Seal

from

$10.99
Pro-King High Quality Differential Products are designed for trouble free installation and setup.
See More

Yukon Gear – High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 5.38 Ratio (Part No.24140)

High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 5.38 Ratio

from

$464.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a thick gear for a 4.10 & down carrier.

Product Features:
  • Fits GM 10.5″ GM 14 bolt truck
  • 10.50″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 5.38 ratio
  • Thick gear set for 4.11 and down carrier
See More

Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)

Dana 60, Dana 70, And Dana 80 Strap Kit

from

$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.

Product Features:
  • u-joint strap kit
  • Fits Dana Spicer 60, 70, 70U, 70HD and 80
  • 1480 u-joint size
  • Includes two straps and four bolts
See More

Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

Super Carrier Shim Kit For GM 9.5"

from

$29.99
9.5″ GM differential carrier Supershim kit.

Product Features:
  • Super carrier shim kit for GM 9.5″
  • Interlocking design makes installation much easier
See More

Yukon Gear – Minor Install Kit For Dana 60 And 61 Differential (Part No.12026)

Minor Install Kit For Dana 60 And 61 Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

from

$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
  • 1/2″ x 18 thread
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41025)

Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

from

$271.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a u/bolt style yoke.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • U-bolt style
See More

Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)

Pinion Install Kit For Dana 80 Differential (4.125" OD Only)

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal (Part No.41209)

Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal

from

$29.99
Product Features:
  • Adapter sleeve
  • Fits GM 10.5″ 14 bolt truck and GM 11.5″
  • Converts to triple lip seal
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)

Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down

from

$529.99
Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 80
  • 3.73 and down ratio only
  • Does not include spider gears
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-547)

Differential Pinion Yoke Assembly

from

$202.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

Product Features:
  • Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
  • Effective fix – replacement restores proper connection between drive shaft and differential
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)

Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS

from

$8.99
Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.

Product Features:
  • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
  • 2.030″ I.D.
  • 8 bent over tabs
See More

Yukon Gear – Differential Cover B (Part No.33572)

Differential Cover B

from

$7.99
Differential Cover B

National – Bearings (Part No.HM807046)

Bearings

from

$59.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Felpro – Differential Cover Gasket (Part No.RDS 55387)

Differential Cover Gasket

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.351A)

Greaseable Premium Universal Joint

from

$54.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
  • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Spicer – Differential Carrier Gear Kit (Part No.707063X)

Differential Carrier Gear Kit

from

$315.99
Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non genuine parts simply cannot deliver.
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

Taper Bearing Cup

from

$6.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Pro-King – Differential Pinion Gear Washer (Part No.744A216)

Differential Pinion Gear Washer

from

$3.19
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

ATP – DIFF COVER KIT (Part No.111104)

DIFF COVER KIT

from

$40.99
DIFF COVER KIT

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55480)

DIFFERENTIAL GASKET

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

National – Bearings (Part No.R-1581-TV)

Bearings

from

$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • High radial load capacity makes them suitable for high speed applications
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Popular 2013 Chevrolet Express 3500 Drivetrains Categories

2013 Chevrolet Express 3500 Drivetrains

You count on your 2013 Chevrolet Express 3500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 196 Drivetrains ranging in price from $2.99 to $1,421.99, you’re sure to find everything you need for your 2013 Chevrolet Express 3500.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, Moog, and Felpro. 2013 Chevrolet Express 3500 Drivetrains start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 8,406 extensive product reviews on 2013 Chevrolet Express 3500 Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Differential Cover Gasket with 4.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2013 Chevrolet Express 3500 below to get started!

Top-Rated Drivetrains Brands For Your 2013 Chevrolet Express 3500

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2013 Chevrolet Express 3500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Felpro, and even more.

Popular Spicer Drivetrains

You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 2013 Chevrolet Express 3500 back on the road. Some of the top-rated Spicer products in these categories are:
Universal Joint
from $51.99
(1)
Universal Joint
U-Joints
Universal Joint
from $40.99
(10)
Universal Joint
Axle Shaft Universal Joints

FAQs for 2013 Chevrolet Express 3500 Drivetrains

What are the most purchased Drivetrains for the 2013 Chevrolet Express 3500?

Out of 196 Drivetrains for the 2013 Chevrolet Express 3500, the most popular in our inventory are:
Greaseable Super Strength Universal Joint
from $55.99
(39)
Greaseable Super Strength Universal Joint
U-Joints
Drive Axle Shaft Flange Gasket
from $4.79
(11)
Drive Axle Shaft Flange Gasket
Axle Flange Gaskets
Greaseable Premium Universal Joint
from $28.99
(20)
Greaseable Premium Universal Joint
U-Joints

What are the top-rated 2013 Chevrolet Express 3500 Drivetrains?

Top-rated Drivetrains for your 2013 Chevrolet Express 3500 based on customer reviews/ratings are:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
“good price”
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
“Works”
Wheel Bearing: Direct Fit, 1 Piece
from $52.99
(20)
Wheel Bearing: Direct Fit, 1 Piece
“USA made”