from

$219.99

Suspension Ride Height Sensor

from

$228.24

Suspension Ride Heig

from

$337.99

The original air compressor on certain GM vehicles fails due to burn out or moisture intrusion. This Dorman OE FIX features thermal protection software and an additional protective membrane to prevent future failures.

Product Features:

Suspension Air Compressor
Suspension Air Compressor, With Two Ping Assembly And Wire Harness: OE Fix
The original air compressor on certain GM vehicles fails due to burn out or moisture intrusion. This Dorman OE FIX features thermal protection software and an additional protective membrane to prevent future failures.
Upgraded replacement – this air compressor replaces and improves on the original part for certain Cadillac, Chevrolet and GMC vehicles
Enhanced technology – features advanced thermal protection software to prevent future burn out

from

$435.55

Suspension Compresso

from

$776.99

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Designed To Provide Inflation Control Of Your Air Helper Springs
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

from

$823.99

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
Easy Installation

from

$287.99

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

CONVERT YOUR RIDE — An alternative to replacing the OE system, this conversion kit converts a factory electronic suspension to a conventional suspension
COMPLETE SOLUTION — Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
RESTORES OE SETTINGS — Restores factory ride height and delivers a stable, comfortable ride
EASY TO INSTALL — Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
KEEPS ELECTRONIC SUSPENSION LIGHT OFF — A complete solution to keep the electronic suspension light off

from

$287.99

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

CONVERT YOUR RIDE — An alternative to replacing the OE system, this conversion kit converts a factory electronic suspension to a conventional suspension
COMPLETE SOLUTION — Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
EASY TO INSTALL — Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
KEEPS ELECTRONIC SUSPENSION LIGHT OFF — A complete solution to keep the electronic suspension light off
RESTORES OE SETTINGS — Restores factory ride height and delivers a stable, comfortable ride.

from

$162.99

Arnott’s new economical rear air shock replacement for GM vehicles with Autoride suspension will convert the rear of the vehicle from electronic air shocks to passive air shocks. This adjustable shock will keep the vehicle at the proper height and provide a smooth, comfortable ride. This easy-to-install shock includes an Electronic Bypass Module (EBM) to turn off dashboard warning lights, and an instruction manual. Arnott recommends replacing rear shocks in pairs if converting the Autoride suspension to this passive air shock. Not applicable for vehicles w/Magneride suspension.

from

$138.99

Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:

Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
No Drill Installation
Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

from

$176.99

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Product Features:

6 Leveling Kit Merchandiser Packages To Choose From, With The Hottest Moving Applications
Levels Out Factory Rake Not Affecting Your Ride Quality
Allows For The Use Of Larger Wheel And Tire Combinations
Easy To Install, Spacers Mount On Top Of The Strut, No Strut Compressor Required

from

$83.99

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Product Features:

Made From Premium Materials
Meets The Highest Quality Standards
Provide A Smooth, Comfortable Ride
Maintain That Factory Ride Quality
Easy Installation

from

$254.99

Quick Strut Kit

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$14.49

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$66.99

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$561.44

Start riding smoother with ACDelco replacement shocks. Built to work with your original GM suspension, ACDelco Shocks offer superior performance and durability.

Product Features:

Engineered for comfort and control
Nitrogen gas charged for superior response
Nitrogen gas pressure also reduces resistance, resulting in a softer ride
Electrostatic paint allows for excellent coverage and better corrosion resistance in hostile environments
O-ring piston seal provides a positive hydraulic seal, allowing little blow-by of fluids, helping improve resistance and predictability of the damping response
Manufactured from quality materials and processes

from

$39.99

Shock Kit

from

$595.99

This air suspension shock is designed to match the fit and function of the original shock on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension shock is designed to match the fit and function of the original shock on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$259.99

Air Compressor

from

$134.99

Shocks

from

$258.99

Arnott’s premium rear shock for GM vehicles equipped with air-assisted suspensions is an ideal replacement for a failing rear shock. This top-of-the-line shock, engineered in the USA, delivers control, stability, performance, and comfort. Arnott’s new aftermarket shock connects to the vehicle’s auto-leveling system with no modifications and includes a bypass resistor to turn off dashboard warning lights for the auto-damping control unit. These rear shocks should be replaced in pairs. Not applicable for vehicles w/Magneride suspension.

from

$135.99

Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$204.99

This air suspension shock is designed to match the fit and function of the original shock on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension shock is designed to match the fit and function of the original shock on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience